FRS / BRZ Sound Solution | Step by Step Install
HTML-код
- Опубликовано: 17 авг 2014
- A video step by step guide to installing a complete sound system for the Scion FR-S / Subaru BRZ, in a quick, easy to understand way. It's everything you need to know about how to install premium audio in your ft86! Presented by www.oemaudioplus.com/ and www.gtchannel.com/
QUICK LINKS:
• O+.Com Store: bit.ly/OAP-FRZ
• FT86club.com Showcase: bit.ly/oap-ft86club
WHATS INCLUDED?:
• Front 1" Soft Dome Tweeter
• Front 6.5" Carbon Fiber Cone Woofer
• Rear Factory Speaker Optimization
• Multi-Channel 32-Bit DSP Amplifier (360 Watts RMS @ 2-ohms)
• Subwoofer Amplifier (120 Watts RMS @ 2-ohms)
• 8'' Dual Voice-Coil Carbon Fiber Subwoofer System
• Vehicle-Specific Subwoofer System
• Quick-Sync "Plug & Play" Wiring Harness
TOOLS NEEDED:
• Panel Tool
• Socket Wrench
• Socket (10mm, 12mm)
• Socket Extension (6"+)
• Wrench (10mm)
• Screwdriver (#2 Philips)
• Pliers
• Allen Wrench (4mm)
• Utility Blade
• Pick Tool (Optional)
• Wire Strippers / Crimpers
• Heat Gun / Torch
• Electric Tape
OEM Audio Plus is proud to design complete solutions designed specifically for the Scion FR-S, Subaru BRZ and Toyota 86. Our Premium Audio Systems are completely plug and play, backed by our 3 year warranty and deliver unmatched sound quality. We are committed to providing components and instructions designed for seamless integration. Please visit oemaudioplus.com for the most up to date installation related documents and media.
www.oemaudioplus.com/ Авто/Мото
Step by step rocket science guide. Great video it's just my brain it doesn't understand any of this.
Great video!
Question hopefully you can answer this. I want to bypass that amplifier in the back. Is there a harness I can buy? I will be using a a aftermarket 4-channel amplifier. Do you have a wiring diagram I can use if bypass is not available?
This is awesome! I am going to get a 2016 FR-S tomorrow. Does this installation apply to the latest model as well? If so, count me in for one of these sound packages!
Congrats on your new 2016 FR-S Matt!! The installation still applies, only the NEW Reference 450Q includes our replacement 4" Carbon Fiber Cone Dash Speakers -- Check it out here: oemaudioplus.com/scion/frs/
This system looks really well designed. My only question is spare tire access. You use the tool free screw for securing the front part of the enclosure, but an allen screw for the rear part. Would I need to have an allen key in the car in order to access my spare tire?
I’d say just keep an Allen key in the glove box
Is Ur Bass Hard Hitting? Thats What Im Looking For 😂🙏💯
where you hooked up the wire at 6:52 is where i put mine the second time the first time i put it on the battery fuse and it messed up the car. Just a quick question.. if I'm doing the wiring for the horn do i put the wire to the same area also?
Hi Prinz, we hope this reply find you well, enjoying your O+ sound solution and with your car running smooth. Regarding your horn is this an aftermarket or factory accessory? We would recommend consulting the manufacturer or instructions of the horn when it comes to installation.
Can you be install in a right hand drive BRZ with factory non-touch screen head unit?
Steven See Yessir!! Here is the link to our RHD BRZ Sound Solution: bit.ly/OAP-REF-RHD
So now that you use the oem amplifier, you can remove the factory version?
For the 400CF Series factory amplifier can be removed. For 450Q we utilize the factory amplifier ;)
so what do you do if the amplifier i have does not have sockets that fit the stock plugs and idk what to do.
If you are in the middle of an install, we insist you contact our System Integration team at 855-636-6346 x 2 to better understand your question and point you in the right direction.
I just wanted to know, because i live in Australia and the drivers side is the opposite, do i do everything on the passenger side of my car or do i do exactly what the video says.
Everything is the same - So sorry for the delayed response!
@@Oemaudioplus I’m considering buying the sound system just real quick when you say everything is the same you mean just copy the video or you mean it’s the same but just on the opposite side for Australian drivers. Secondly in TJ Hunts video he said that’s there no setting to change the bass level is that true or false ?
Always end up with a bloody hand somehow hahahaa
lol!! True story.
i got mine all wired up speakers are powered and everything but my sub isnt making bass
Either you connected them wrong. Wire is corroded or sub isnt hooked up right
Those green tabs aren't meant to come off, the kick panel slides into them. You're supposed to leave them attached to the car.
Out of curiosity. Why is there only one Sub in this system and not one on both sides? Wouldn't it give better results rather than the one? I'd understand the price for two but for one it's arguable to spend half of the price of this product getting the same results by making it yourself and customising/fine tuning it.
...bass doesn't technically have to be stereo. Since it is omnidirctional, a single sub will fill in the lows just fine (fron anywhere). Integrating 2 subs into this setup adds (some) complexity and added weight. If you're going for spl/loudness and not clarity, more subs/bigger ones will get you there, but then you also need more power too.
how is the bass with this set up?
We deliver accurate, deep low frequency reproduction (rather than “boom boom” bass). High resolution (clean, crisp clear) sound is our top priority all the while delivering the impactful emotional weight of your music (via the low frequencies). You can expect seamless, full-range, detailed sound reproduction of instruments and voices without localizing the speakers or sub - a trait commonly associated with fine high-end home audio speakers.
You say that you bring the solution for the Toyobaru. But what was they problem?
Hi *****, could you rephrase your question?
OEM Audio + Sure, the title say "sound solution". So, is the solution to what problem? Tx
*****, lol! Thanks for the question!!! The problem is poor audio. It is our mission to revolutionize your driving experience with unmatched sound quality, seamless integration and proven reliability.
will this work with an after market head unit
Lolcake x yes!! You can select your specific head unit on our product page (during checkout). Our team will tune your O+ sound solution specifically for your radio.
OEM Audio + do i have to give the exact model number?
Lolcake x general model would suffice (i.e. Pioneer AVH Series, etc..)
OEM Audio + also you said in the comments that it would set you back $300 - $400 bucks. Why is ft86 speedfactory selling it for $1500 is there a difference in the model there selling?
Lolcake x the Reference 450Q (bit.ly/OAP_ft86) is available for $1499. Are you able to provide more context for the "$300-400" quote you're referring to?
Does the car came with amp?
Joe Yes, the North American 86/BRZ comes with a factory Amplifier.
Is there a before and after audio comparison?
We've got this Sound Clip for reference kuhlka / ruclips.net/video/u7YIa00hs2Q/видео.html
do you think scion/Toyota dealerships will know how to install this?
+Erock, please excuse the delayed response. Regarding installation it depends on the dealership - Many dealers have accommodated this request. Give us a call and we'd be happy to assist: 855-636-6346 X5
SPEED NUT
No way I would ever remove factory weather stripping!
Same here, even if I wanted to do this I couldnt understand cuz Americans drivers seat is different to the UK and Australia
@@craigstevenson7708just watch this video from a mirror...LOL
U can put it back very easily... ive removed it dozens of times
I work for an auto glass shop, we remove factory weather stripping all the time and put it back exactly the way it was before. Never had any issues.
This is the difference between a "Butcher Tech" and a REAL Tech. A butcher tech wouldn't bother doing the steps the guy in this video is doing. 7:05 is your prime example of someone who knows their shit. Good video!
There is so much wiring in cars these days damn
***** Thank you! As a matter of fact you can access your tire without the removal of the enclosure: You fold it up on the floor board side opposite the sub, slide to the left and then twist up and out. Works perfectly! bit.ly/nosubremoval
This video would be much easier to understand without the background music.
USE A PLASTIC PANEL TOOL!
That's too complicated, I'm just gonna pay someone to do this for me lol
Too much work. Who do I pay to do this for me?
We offer installation at our facility or we can asisst you in finding an installer in your area.
@@Oemaudioplus I live in Indiana.