I have this thermostat. I don’t want to use WiFi. It’s prompting to set it. How do you just bypass Can you just set temperature hold ? Thanks for the information.
Mine just keeps making a “clicking sound” as the screen pulses on and off. Tried turning off the breaker, unplugging the unit from the wall. This is the SECOND Honeywell unit I’ve purchased that has failed like this.
After my "successful" reset, web and app based commands aren't going through. No commands are being sent, but in the app it says there's a hold of 70 degrees that can't be undone. But the screen of the thermostat says 65 and no hold. The app, when i try to release the hold, it snaps right back to a hold. But again, none of that actually gets sent to the thermostat, just remains on the app's display. Any ideas? Potentially a temp issue at honeywell?
The reason I wanted wifi capability was so that I could control it remotely. If system fails when I'm away and I need to be home to reset it, that's not good.
My thermostat is similar to yours but it has only three buttons instead of 4 it's the Honeywellth6000 it wont go to 39 when on reset mode .. the reason I'm trying to reset it cuz I have it set on 70 but its says its 77 for the temperature
I think he means the “Command” number (39) on the left and the 1 or 0 on the right. My guess is they are installer mode codes. Needs the install/service manual to know them and what they do.
This is bad information. All this does is reset the Wi-Fi. When you go into reset you actually want code number 90. Was very disappointed in this video.
What’s the point of WiFi with no phone? Either way it will show up as a wifi network so on any device, like a laptop, just look for a new available wifi network.
Good and informative, but I need help with an older thermostat
How is this 3 minutes long??
😂😂😂😂
Mine only has the 3 bottom buttons. It only goes to 29. Any advice? (It only blows cold for some reason)
This is instructions for reseting wifi, not the factory settings.
How about if thermostat is blank without power?
I checked the breakers but thermostat screen is still without light
I have this thermostat. I don’t want to use WiFi. It’s prompting to set it. How do you just bypass
Can you just set temperature hold ?
Thanks for the information.
Did you figure this out? I've never had the app and never had a problem. Don't want to connect to wifi
Can you please tell me how to reset the touch screen only model? RTH7600D
Wondering if you want to disconnect from the Wifi altogether, do you follow these same steps until it shows "wifi setup" and will it work offline?
Does this reset the thermostat so previous owner no longer has access?
Did you ever figure this out same issue brought me here. I’m getting a new one but was waiting
Mine does not go up to 39 :/
We did this- but now our cool option is gone. It only displays heat or off. How do we fix that?
Mine just keeps making a “clicking sound” as the screen pulses on and off. Tried turning off the breaker, unplugging the unit from the wall. This is the SECOND Honeywell unit I’ve purchased that has failed like this.
Mines doing the same thing
After my "successful" reset, web and app based commands aren't going through. No commands are being sent, but in the app it says there's a hold of 70 degrees that can't be undone. But the screen of the thermostat says 65 and no hold. The app, when i try to release the hold, it snaps right back to a hold. But again, none of that actually gets sent to the thermostat, just remains on the app's display. Any ideas? Potentially a temp issue at honeywell?
Maybe reset your Wi-Fi connection
Can you perform reset on a Honeywell Pro 2000?
The reason I wanted wifi capability was so that I could control it remotely. If system fails when I'm away and I need to be home to reset it, that's not good.
My thermostat is similar to yours but it has only three buttons instead of 4 it's the Honeywellth6000 it wont go to 39 when on reset mode .. the reason I'm trying to reset it cuz I have it set on 70 but its says its 77 for the temperature
I have the same did you figure it out
@@tstewart7452 unfortunately no
So why 39 and 0?
Mine says no signal on top left corner
Why does mine only go to 28?
Thank you soo much!!
Just what I needed to know!
There’s nowhere on my phone where it says new thermostat that you lost me there
Thanks for the demo
Anyone know what those numbers on the left even mean? I’d like to know!
Actual room temprature
I think he means the “Command” number (39) on the left and the 1 or 0 on the right. My guess is they are installer mode codes. Needs the install/service manual to know them and what they do.
This is bad information. All this does is reset the Wi-Fi. When you go into reset you actually want code number 90. Was very disappointed in this video.
I need to turn it off
Mine goes for 42 and skips to 38.
Thank you!!
Does not work.
No cell phone- outta luck ☹️
What’s the point of WiFi with no phone? Either way it will show up as a wifi network so on any device, like a laptop, just look for a new available wifi network.
How to reset your honeywell thermo is pretty vague considering every model has different sytem codes. 😂
Durrrrrrrrrr