Radio Setup of the FMS kingfisher V2 by Fat Guy Flies RC
HTML-код
- Опубликовано: 22 фев 2023
- Well here ya go, the radio setup of the FMS kingfisher v2. Well it went well but to use the reverse function you will need a 7th channel. Doing the radio setup was very straight forward. The FMS kingfisher V2 has a little shelf in the fuse where the receiver and Reflex system sit next to each other.
To get this great plane at a BETTER PRICE go here: www.hobbyzone.com/products/ki... AT checkout put in FGFRC to get $10 off the price!
Thanks for watching and staying up to date with Fat Guy Flies RC!
You do that by hitting that thumbs up button and subscribing to my channel! Also hit that little bell and you will be notified every time I upload a video!
God bless!! - Хобби
The FMS Kingfisher v2 , it NEEDs 7 CHANNELS FMS, ADVERTISE THAT!!
Great tutorial as always, thank you for getting straight to the point . Awesome
Most welcome, I try to keep it as brief as possible.
Very helpful. Thanks
Glad to be of service!
Thanks for sharing, I already have that plane but I can use your tips all day long. I don't do the thrust reverse but nice to know its there for the floats one day.
Glad to help
This was fantastic, great video! What kind of receiver are you using for this set up?
Spektrum ar620.
I wonder if the KF wheels will fit on the FMS Super EZ V4.
Sorry I do not know.
Hi sir
Which is the glue to use between the elevator and connections of the foam?
It is called hold the foam here is a link: www.amazon.com/Beacon-Hold-Foam-Styrofoam-2-Ounce/dp/B000YQDXJ0/ref=sr_1_3_pp?crid=2ZM94F197T74L&dib=eyJ2IjoiMSJ9.qlQrpTTT0Ro5P3qn6bZR3q49VTfhlETOwRm6ComHN8SheN-rxTF7obA4ytDaZcdc4z7NWlAJluCWl4EdY1Akf0SozDrRG8knvaFPlDgA4DEdRaM9fBFoB5a3l_5BJMMxB3KUUw4Hyd1pbYUdDGitA1Qsf8JjVvx68UtLj-yb9V040CFBKVc1e19nMj1KBcoV9KDCO3TAuf1cX692IVwC42HPmn5TOmtLgkaC-9h-Iec.9NNHFEPylyVKVOBSWNkFFO1Gkv-HMEsPqGh80-qPR7M&dib_tag=se&keywords=hold%2Bthe%2Bfoam&qid=1710934844&sprefix=hold%2Bthe%2Bfoam%2Caps%2C99&sr=8-3&th=1
Which holes did you finally decide to use for rudder and elevator servo Arm and control horn? I just set mine up according to stock (manual) suggestions but In the first video on this plane it sounded like you were going a different way. What did you finally do and what were your reasons? Thank you for all the information you provide.
Oh I see you show a later video where you set everything to max deflection.
Ok so I did answer the question after all. Cool. Thanks for stopping by!
Sir I need some help
When you say at the video that the yellow cable off the throttle go to channel 5, which cable do you mean?
Should be a little single yellow off the ESC that is a signal wire only plugs into the TOP port on channel five where gear would normally go.
@@FatGuyFliesRCsir I came out the esc but the only cable is the throttle cable. There is no yellow cable.
Imho, a never been in the air ever 'pilot', on kingfisher won't need a gyro. It's extremely forgiving on its own. (& can be AS agile as a timber x too)
Yeah I am only using it because it came with it. After a few flights it will be gone.
If you could tell me, because I will buy it if the gyro system if you leave your hands from the sticks will horizontally the aeroplane. Sorry for my English and thanks.
Yes it will self right in Stability mode.