Speartech Gen 5 V8 LT4 8L90 Standalone Swap Harness Preview
HTML-код
- Опубликовано: 11 июн 2016
- Speartech is leading the way again! The LT4 is a 650 HP supercharged 6.2L Gen 5 Chevy V8 found in the C7 Z06 and CTS-V. We have ours mated to the new 8L90 8 speed automatic transmission, and have developed a swap friendly harness and control system to enable this powertrain to be used in your next swap project! You can see our gear indicator showing the transmission going through all the gears! We will be putting this combination in a 1969 Chevrolet C10 truck for final R&D!
Stay tuned and subscribe for more!
www.speartech.com
©2016 Speartech Fuel Injection Systems, Inc. Авто/Мото
That engine will be in my 83 Fbody 2019 can’t wait
*SMOOTH!!!!*
what sort of shifter is needed for this thing? standard 4 speed auto or something else? also any support for paddle shifting?
is a standalone tcm for the 8L90 in the works?
Also could a 4L60E lock up behind this transmission An work or no cause 2 totally different Gens?
was this a wet sump or dry sump version of the lt4
Hey I want to swap my 82 monte carlo with this how will I go about getting engine mounts and trans mounts and am I able to select gears "manually" when I want to
I need this gargantuan engine to my Daihatsu Rocky!
Hey i have a L86 6.2L with transmission 8L90 4X4 i would to get the same harness that you show on the video , and the switch for the 4x4, also come with gauge that you show on the video.
I have 55 Chevy truck with TH400 trans . Is this trans Need floor cut to make room for 8L90 ?????
What gas pedal do you use for this harness?
HI, my car is lexus is-f, is the 8L90 can swap my transmission TL-80SN?
Any word on a standalone tcm for the 8L90 in the works? I'd love to ditch my 6L80 in my Camaro!
We aren't developing a standalone 8L90 controller, but you may look into TCI or PCS. That's more in line with what they do.
How much was it
FUCKING AWESOME CAN THE 8L90 TRANS GO BEHIND A GEN 4 lsx/ls2 OR ls3?
What tail shaft is that your using on the transmission? I have a 2019 Lt1 and need to change mine so it can fit in a g body
This is a truck 2WD transmission. You'll likely need an adapter from Sonax to convert to a u joint or modify the transmission.
Price?
wait, you can swap these 8 speeds in older cars?
Yes we have an LT4/8L90 in our 1969 Chevy C10 shop truck and it's running very good. We sell many harness packages and complete engine packages for older swap cars quite frequently too. We have a quick video of our 69 C10 with the LT4/8L90 here: ruclips.net/video/QZvNpJI_0nw/видео.html
@@SpeartechLSX can you put the 8l90 behind a gen 4 engine?
Won't work, 8L90 requires the Gen 5 engine/trans computers for proper operation.
MotorsportsX if you read the overview on the jegs website it says it will work with an adaptor plate