95mph in my DY motors animal cat. 2 OSE Raiders. 4074 rockets 1900kv. They were supposed to be temporary till my ZTWs came in. But they perform so well I just left it in.
The editing and production are on point the channel is growing nicely, I jumped on at like 2k. I hope this hits 100k some day keep buying different boats and doing your thing!
NEW BOAT!!! NEW BOAT!!! See grown man shake his booty pump hands in the air. I believe you must have shown great restrain when kayaker paved his road to hell. However, once again a great video-boy the 29 was moving out plane and simple-love it! I bought the BJ 24 hull and hatch only appoxyed
Epoxied some thin wood to the inner hull and used that same motor mount. I really dig your progression from stock to wholly modified rc boats keep it up Big B 👍
I try to show the good days the bad days and the fantastic days you know! And hopefully some of my viewers and subscribers can learn from my trials and tribulations.
Thank you brother I'm learning how it all works right now once I figure everything out and get together some extra features I can offer I will announce the membership program
The 90 ose is a boss little speed control with the right motor. I've actually soldered up a 150 cap pack on my 90 flycolor & about to put a flow pack 4s cap on it.
@@IRONCLADRC my solder skills need a lil work use to play with drag slot cars back in the day building chassis and such but I used a mini torch not a iron afraid of a torch with insulated wires for the most part, anyway love your feedback and interaction with your subs ,peace.
Really appreciate all the update videos for the veles. It’s been helping me with mine. This is my first boat and I was wondering if I run the Veles with no plastic stuffing tube, will that create any problems for the esc/motor?
If you run no Teflon linner you'll need to upgrade the size cable to .187 flex 3/16 shaft. The stock cable needs a Teflon liner (it's a must) OSE has a HD upgrade cable for the veles
That sucks. Don't feel too bad. My U76 hydroplanes new futaba reciever got wet and I had it in a nitrile glove finger sealed in a old school sealed radio box. Loose money. 😒
Hey buddy sorry to hear about the bad luck. Quick question I noticed that the stuffing tub retaining clamp inside the Velez was gone. Is there a reason for that or did you forget to put it back?
Top speed 150 flycolor(ose raider)in my 30 inch rigger 6s 5000 mah 79.6 mph Then sunk it, lost in 26 foot of water gps gone too.temps on previous run when I got the speed, 150 on built in Caps,130 on everything else. Unlike the raider the flycolor has no extra caps.
You mentioned something about the wheelhouse yesterday. Man, that sucks. I've had boats where things weren't securely mechanically attached and I used lanyards to keep parts attached "Just In Case", but who would have thought about the magnetically-attached wheelhouse coming off in a boat that does 5 Knots? My only thought is could your connection with HH & ProBoat help you out?
A lanyard would of been better than my foam grrrrrr. There's like 6 magnets that holds the cabin on the boat there strong & do the job but any type of side impact will knock the wheel house off dang wish I'd thought about a lanyard. Jeez. Day late dollar short
Ran the veles 29 today, still on 4s, during the hurricane I installed duel cooling, larger lines and rcbb rudder. Temps never went over 113 degrees. On the stock setup, I hit a high of 175!. So tell me, does duel cooling rudder and larger lines work? Yes! I'll be running 6s tomorrow, and checking Temps frequently.
Sorry for your loss Big B. Great video though. I lost my stock prop last week and have been waiting for replacements from OSE until today. Wanted to ask, what happens when the motor overheats? Does it stop working, make it run badly, or slower? What are the signs of an overheated motor?
Alot of time just over heating the motor you can't really tell any differences extreme over heat over 190°f will burn the stater winds ( usually when this happens you'll see smoke) burning the copper winds you can see a change in the color of copper winds in the motor
BigB, If it was clear-shallow water, throw on a mask and snorkel... Maybe put a sonar on your kayak? Big B, pay the $80 and fab an fpv tower, yes it hurts, but alot of years ahead on that beautiful tug
that sucks about the tug boat. I have a question. I have the Veles 29 and looking to go faster. would a bigger esc make me faster? me and my buddy run 5S and im trying to go faster. im on a stock Veles 29. thanks for the videos, great work and SMC batteries ROCK!
Yeah I ran a 150 ose Raider in mine and definitely could tell a difference in speed and temp, 42 high rake from oxidean is BOSS on the veles abc 1616 17/45 is BOSS
@jacobe.2119 There are better, more expensive esc options, but that raider worked. Consider a dual pickup veles ruder to help cool things down from ose www.offshoreelectrics.com/proddetail.php?prod=ose-83358&PARTNER=ironclad
What kind of a hole mess with a roll over boat that is being recovered with another boat. And what the F the bottom wheelhouse you can get but not the top part. That F ed up YO! But I appreciate all the people on the water that help when you don't have a recovery boat.
It's weird right they should sell the whole wheel house complete. And yes I'd lost a couple boats with out the help of a boater on the river. Watching a boat float away out of sight is scary
I've ran 63Mph with the flycolor/OSE 150 ESC. But the boat isn't running properly.... My goal is 90 ish too :) If I get the boat running properly and get some new props to try out I think it is doable.
I've used super glue, but recently I've found that silicone on both ends holds the tube inplace pretty good. (Only on the ends) heat will help if you need to remove the Teflon liner
@@IRONCLADRC A dead simple remedy for a spinning liner is to rap some ptfe plumbers tape around the liner in 3 or 4 places along the liner. Rap the tape with enough thickness to make the liner a nice tightish slide in fit into the stuffing tube, been using this method for years & never had a liner spin since.
I see that I'm not the only one who has a bad day last Wednesday I smoked my motor and puffed up my battery in my mg36 but I got 80mph before it did it
I had another bad day today lol. 2 boat went in thankfully I got both boats back, little problems that prevented me from finishing the runs. Grrrrrrrrrr
#ftg on the kayak....i get he was tryin to do right for ya but damn...seein ya got it covered he shoulda backed off...and bailed out his kayak after that wheelhouse! I literally just put a raider 150 in a buddys veles...3d printed a mount to bolt into factory spot cuz i didnt wanna hack his brand new boat up
It was a big Job, I had to get up the nerve to chop up a perfectly good boat LOL. Eventually I'm gonna remove the whole electronics tray Eventually.time allowing
@@IRONCLADRC yeah sometimes help isn't really help at all but you took it like a champ and kept your composure. That makes you a winner no matter what.
@@IRONCLADRC I hope it still counts if it was two. Lol I have them in a TFL Zonda and they're awesome. Can run 80 mph laps all day and they don't break a sweat.
I Clicked the link for the motor and it has a few option for the KV. Can you please tell me which one to get for running 6s? And as always awesome Video Big B.
3660 1800kv or 2150kv, the 2150 would be the faster of the 2 choices BUT Temps on 6s would be hot and you'd have HAVE to run smaller props. The 1800 kv would be a better choice so you can turn a larger prop without issue, wouldn't get good top end speed with small props, bigger props with the lower kv motor. What are you building your boat to do? Ovals or speed runs?
@@IRONCLADRC speed runs. I’ve ironclad my Veles 29 ose150 Esc I have a leopard K2 4070 1750kv that I was going to put in my ul19 but put it in the Veles. Today I smoked the ESC in my ul19, so time to build it. A long time ago I got a firma 160ecs I was going to put in the ul19, well today is the day just need a motor to go with it, running 6s SMC 7600mah 150c. The ul 19 just want to rip in circle track.
Look at the bottom of the boat, there's 3 ride surfaces and 2 steps, 1/2"- 1" behind the forward ride surface forward step is where I usually ran my Cg
Yea 81 mph with the 2 blade abc prop, I've tried a couple little mods on my prop that has not worked as I thought it would ? So I've been slowly reworking the prop trying to regain my lost performance
No I have not tried any bigger props than that 1616, I've run the 1716 on it but that was before I've done the low center gravity modifications to the boat so probably try the 1716 or 1816 here shortly, should be able to keep the boat on the water hopefully with that extra power & Weight
Yea man it's definitely a freaking bummer, he had good intentions, but the wheel house I'd impossible to find. The cabin is available but not the wheel house
@@IRONCLADRC That's really crappy not to have spares available. Look forward to seeing how your home made one turns out once you've done it. I'm just building a Billings Banckert model Tug as a small rescue, then I have a model slipways Wyeforce model as a scale longer term build rescue that is much bigger and more powerful. Gonna also put FPV on those just like you did.
If it were a complete wheel house then yes I probably would but it's just the base of the cabin with out a wheel house. Gonna build an ironclad wheel house
![Stromae, Pomme - “Ma Meilleure Ennemie” (from Arcane Season 2) [Official Visualizer]](http://i.ytimg.com/vi/1F3OGIFnW1k/mqdefault.jpg)
![[#2024MAMA] G-DRAGON - 무제(Untitled, 2014)+POWER+HOME SWEET HOME+뱅뱅뱅+FANTASTIC BABY | Mnet 241123 방송](http://i.ytimg.com/vi/Ox29z5Nf1Uk/mqdefault.jpg)
95mph in my DY motors animal cat. 2 OSE Raiders. 4074 rockets 1900kv. They were supposed to be temporary till my ZTWs came in. But they perform so well I just left it in.
The editing and production are on point the channel is growing nicely, I jumped on at like 2k. I hope this hits 100k some day keep buying different boats and doing your thing!
Thanks for being a part of the boat gang.. 100k in my dreams lol
*Wow! That's a really cool video! Cool! You're a boat video expert! Thumb! 😃🔥🔥🔥👍👍*
NEW BOAT!!! NEW BOAT!!! See grown man shake his booty pump hands in the air.
I believe you must have shown great restrain when kayaker paved his road to hell.
However, once again a great video-boy the 29 was moving out plane and simple-love it!
I bought the BJ 24 hull and hatch only appoxyed
Epoxied some thin wood to the inner hull and used that same motor mount.
I really dig your progression from stock to wholly modified rc boats keep it up Big B 👍
Thanks brother.
Great Video!!!hanks for keeping it real. Its always good to show the good and bad of R/C boating. Better days a head
I try to show the good days the bad days and the fantastic days you know! And hopefully some of my viewers and subscribers can learn from my trials and tribulations.
Hi , I wouldn't cut the hull structure , I would remove the motor mounts and would use 2mm carbon fiber board to mount the platforom for everything .
Planning on reinforcing the hull once I remove the rest of the electronics tray.
Sorry to hear about the tugboat,what happened to the pool noodle and plane prop boat retreval thing?
The pool noodle retrieval boat was my buddy's boat, not mine. Awesome build 👌
Love the channel BIG B, ILL DO THE MEMBER
Thank you brother I'm learning how it all works right now once I figure everything out and get together some extra features I can offer I will announce the membership program
have the ose 90 in my mini storm that's still in the works on my bench no rush winter project.
The 90 ose is a boss little speed control with the right motor. I've actually soldered up a 150 cap pack on my 90 flycolor & about to put a flow pack 4s cap on it.
@@IRONCLADRC my solder skills need a lil work use to play with drag slot cars back in the day building chassis and such but I used a mini torch not a iron afraid of a torch with insulated wires for the most part, anyway love your feedback and interaction with your subs ,peace.
Really appreciate all the update videos for the veles. It’s been helping me with mine. This is my first boat and I was wondering if I run the Veles with no plastic stuffing tube, will that create any problems for the esc/motor?
If you run no Teflon linner you'll need to upgrade the size cable to .187 flex 3/16 shaft. The stock cable needs a Teflon liner (it's a must) OSE has a HD upgrade cable for the veles
@@IRONCLADRC awesome thank you. I will be doing this upgrade
That sucks. Don't feel too bad. My U76 hydroplanes new futaba reciever got wet and I had it in a nitrile glove finger sealed in a old school sealed radio box. Loose money. 😒
Oh man that's a bummer and you had it in a finger a balloon jezz that's a bummer brother
Hey buddy sorry to hear about the bad luck. Quick question I noticed that the stuffing tub retaining clamp inside the Velez was gone. Is there a reason for that or did you forget to put it back?
I used epoxy on the under side of the stuffing tube as support.
Top speed 150 flycolor(ose raider)in my 30 inch rigger 6s 5000 mah 79.6 mph
Then sunk it, lost in 26 foot of water gps gone too.temps on previous run when I got the speed, 150 on built in Caps,130 on everything else.
Unlike the raider the flycolor has no extra caps.
Damn sun 79 that's freaking awesome with a fly color or OSE nice numbers
You mentioned something about the wheelhouse yesterday. Man, that sucks. I've had boats where things weren't securely mechanically attached and I used lanyards to keep parts attached "Just In Case", but who would have thought about the magnetically-attached wheelhouse coming off in a boat that does 5 Knots? My only thought is could your connection with HH & ProBoat help you out?
A lanyard would of been better than my foam grrrrrr. There's like 6 magnets that holds the cabin on the boat there strong & do the job but any type of side impact will knock the wheel house off dang wish I'd thought about a lanyard. Jeez. Day late dollar short
I could be wrong but I believe they are 6mm bullets on the OSE? But correct me if I'm wrong.
Your probably right, I just looked & you are right 6mm bullets. Thanks for the correction
@@IRONCLADRC 10-4 I aint trying to be that guy but I just wanted to put it out there before haters start blasting lol.
Curious why we leave the brake so high when linking remote? Something to do with reverse??
love my veles it's a great cat
Ran the veles 29 today, still on 4s, during the hurricane I installed duel cooling, larger lines and rcbb rudder.
Temps never went over 113 degrees.
On the stock setup, I hit a high of 175!.
So tell me, does duel cooling rudder and larger lines work? Yes!
I'll be running 6s tomorrow, and checking Temps frequently.
Awesome 👌 good to hear.... can't wait to go back to the speed run spot. I'm dieing to get a run in
And that hurricane is heading your way!!
Sorry for your loss Big B. Great video though. I lost my stock prop last week and have been waiting for replacements from OSE until today. Wanted to ask, what happens when the motor overheats? Does it stop working, make it run badly, or slower? What are the signs of an overheated motor?
Alot of time just over heating the motor you can't really tell any differences extreme over heat over 190°f will burn the stater winds ( usually when this happens you'll see smoke) burning the copper winds you can see a change in the color of copper winds in the motor
@@IRONCLADRC don't fear the pretty blue smoke =)
BigB, If it was clear-shallow water, throw on a mask and snorkel... Maybe put a sonar on your kayak? Big B, pay the $80 and fab an fpv tower, yes it hurts, but alot of years ahead on that beautiful tug
Heck no I'm not snorkeling in that river there's a few big azz alligators in there
You are too kind Big B. The guy in the kayak touched your things without asking permission. He should have offered to replace it.
He actually did offer but I turned him down
@@IRONCLADRC bigB, you did the right thing.. its up to us to grow the hobby, you are a breath of fresh air..
that sucks about the tug boat. I have a question. I have the Veles 29 and looking to go faster. would a bigger esc make me faster? me and my buddy run 5S and im trying to go faster. im on a stock Veles 29. thanks for the videos, great work and SMC batteries ROCK!
Yeah I ran a 150 ose Raider in mine and definitely could tell a difference in speed and temp, 42 high rake from oxidean is BOSS on the veles abc 1616 17/45 is BOSS
@@IRONCLADRC awesome! thank you so much. Im going shopping!
@jacobe.2119 There are better, more expensive esc options, but that raider worked. Consider a dual pickup veles ruder to help cool things down from ose www.offshoreelectrics.com/proddetail.php?prod=ose-83358&PARTNER=ironclad
What kind of a hole mess with a roll over boat that is being recovered with another boat. And what the F the bottom wheelhouse you can get but not the top part. That F ed up YO!
But I appreciate all the people on the water that help when you don't have a recovery boat.
It's weird right they should sell the whole wheel house complete. And yes I'd lost a couple boats with out the help of a boater on the river. Watching a boat float away out of sight is scary
Hi , what do you choose cat pack .
I've ran 63Mph with the flycolor/OSE 150 ESC. But the boat isn't running properly.... My goal is 90 ish too :) If I get the boat running properly and get some new props to try out I think it is doable.
You'll get 90 keep trying brother keep trying numbers don't come overnight that's for sure
@@IRONCLADRC I'll comment when I get it! :)
Need some advice for my teflon liner spinning in my stuffing tube. got any advice? super glue didnt work :(
I've used super glue, but recently I've found that silicone on both ends holds the tube inplace pretty good. (Only on the ends) heat will help if you need to remove the Teflon liner
@@IRONCLADRC A dead simple remedy for a spinning liner is to rap some ptfe plumbers tape around the liner in 3 or 4 places along the liner. Rap the tape with enough thickness to make the liner a nice tightish slide in fit into the stuffing tube, been using this method for years & never had a liner spin since.
I see that I'm not the only one who has a bad day last Wednesday I smoked my motor and puffed up my battery in my mg36 but I got 80mph before it did it
Tough break brother, at least it's something replaceable & not the hull it self
@@IRONCLADRC yep that's true
I survived this weekend although I have had bad days on the water myself too many times to say.
I had another bad day today lol. 2 boat went in thankfully I got both boats back, little problems that prevented me from finishing the runs. Grrrrrrrrrr
#ftg on the kayak....i get he was tryin to do right for ya but damn...seein ya got it covered he shoulda backed off...and bailed out his kayak after that wheelhouse! I literally just put a raider 150 in a buddys veles...3d printed a mount to bolt into factory spot cuz i didnt wanna hack his brand new boat up
It was a big Job, I had to get up the nerve to chop up a perfectly good boat LOL. Eventually I'm gonna remove the whole electronics tray Eventually.time allowing
@@IRONCLADRC i wanted to do the same 😂 ill probably convince him to lemme do it when he smokes factory motor!
Ha, I melted the solder joints to the ec5 connectors on my blackjack 29. Kayaker saved me lol
I've had alot of help from boaters in the past. Literally saved the day type deal, But this occasion not so much
@@IRONCLADRC yeah sometimes help isn't really help at all but you took it like a champ and kept your composure. That makes you a winner no matter what.
U have a problem with heat? I have no idea why my set up is too hot. Sss4082 2400 kv flycolor 150a esc 42mm prop smc 6s .
That’s a big motor for that esc. I’d do a 180 amp
I Gree with Jayce, that motor maybe pulling more amps than the esc is putting out continuous.
@@IRONCLADRC I run a 4082 1600 kv on a 180 and rarely see temps above 110 in the summer heat
Sorry its a seaking 180 not flycolor 150. Flycolor 150 got burnt yesterday. So I need to go down kv?
@@THANHNGUYEN-uq8zk I would say nothing over 2000 kv on motor
Hello would a sss 4092 with a hydro esc fit in the veles ?
Yea, but the stock motor mount will need a forward motor mount ring for additional support or upgrade the motor mount/electrics tray.
@@IRONCLADRC thanks a lot 👍🏾
I've been 85 with OSE 150 Raiders with pleeeentyyyy more in it.
That's a great number with the ose. 👍 👌 IRONCLADED OUT
@@IRONCLADRC I hope it still counts if it was two. Lol I have them in a TFL Zonda and they're awesome. Can run 80 mph laps all day and they don't break a sweat.
OUCH!!
Did you take the on and off switch off?
I upgraded the esc, flycolor /ose 150 does not have on/Off switch
I Clicked the link for the motor and it has a few option for the KV. Can you please tell me which one to get for running 6s? And as always awesome Video Big B.
3660 1800kv or 2150kv, the 2150 would be the faster of the 2 choices BUT Temps on 6s would be hot and you'd have HAVE to run smaller props. The 1800 kv would be a better choice so you can turn a larger prop without issue, wouldn't get good top end speed with small props, bigger props with the lower kv motor. What are you building your boat to do? Ovals or speed runs?
@@IRONCLADRC speed runs. I’ve ironclad my Veles 29 ose150 Esc I have a leopard K2 4070 1750kv that I was going to put in my ul19 but put it in the Veles. Today I smoked the ESC in my ul19, so time to build it. A long time ago I got a firma 160ecs I was going to put in the ul19, well today is the day just need a motor to go with it, running 6s SMC 7600mah 150c. The ul 19 just want to rip in circle track.
What all do I need to install the 4074 in my Veles
Not much, I guess you'll need a water jacket, and connectors, I recommend upgrading the esc.
HobbyStar 4074 2,000kV motor?
Sss 4074
Where is the CG of this boat?
About a half inch behind the forward step
@@IRONCLADRC I don't understand, what would be a step forward? would the cg be around 40%?
Look at the bottom of the boat, there's 3 ride surfaces and 2 steps, 1/2"- 1" behind the forward ride surface forward step is where I usually ran my Cg
@@IRONCLADRC thank you friend
Didn’t you get 80 out of that boat with a 3 blade?
Yea 81 mph with the 2 blade abc prop, I've tried a couple little mods on my prop that has not worked as I thought it would ? So I've been slowly reworking the prop trying to regain my lost performance
@@IRONCLADRC damn that sucks. Have you even tried like the 1817 cnc prop you have?
No I have not tried any bigger props than that 1616, I've run the 1716 on it but that was before I've done the low center gravity modifications to the boat so probably try the 1716 or 1816 here shortly, should be able to keep the boat on the water hopefully with that extra power & Weight
@@IRONCLADRC hell yeah B can’t wait to see that run
67 mph UL19 160 Firma stock motor upgraded prop dual cooled
Ah man that really sucks that you lost the wheelhouse and FPV because some dude meddled without asking you first if you needed help. :(
Yea man it's definitely a freaking bummer, he had good intentions, but the wheel house I'd impossible to find. The cabin is available but not the wheel house
@@IRONCLADRC That's really crappy not to have spares available. Look forward to seeing how your home made one turns out once you've done it.
I'm just building a Billings Banckert model Tug as a small rescue, then I have a model slipways Wyeforce model as a scale longer term build rescue that is much bigger and more powerful. Gonna also put FPV on those just like you did.
Good thing that wasnt with a real boat otherwise it would be B.O.A.T. (Bust Out Another Thousand)
Ain't that the truth.
Ive come in after a run to find gas in my bilge. 7k for a new tank.
Spend the $80 on a new wheelhouse bro!
If it were a complete wheel house then yes I probably would but it's just the base of the cabin with out a wheel house. Gonna build an ironclad wheel house