@@tylerevansfoothill Spray paint cans work just fine - do it with a few thin coats letting it properly dry in between so it doesn’t leave thick runs on the inside (even if it does, you won’t see that on the outside unless you’re using a paint with pearl or flake in it). The nice part is it can’t be scratched off from the outside. You can scratch the case, of course, but the color is still there.
Normally I like transparent technology, I think it's looked really good in your past projects. However, I just don't like the look here. Maybe it's because I just think the original color/material design of the iPod is so good and "premium looking".
Transparent enclosures work well when you can see the details of the circuitry inside. The don't work as well when your entire back is obscured by a giant battery pack and tons of Kapton tape. A frosted or solid color look would be better, in my opinion. But, it's his build. If he likes what he built, that's all that matters.
@@AmartharDrakestone Yeah, once he had the battery and haptic motor taped in, all I could see was that tape and how it looked bad with a transparent shell. I agree, I'd have at least gone frosted if not a solid color.
@@AmartharDrakestone Paradox also asks the question of "When is it a new ship?". Just the fact that we are discussing this, it is enough evidence to this is the iPod of Theseus
Tip for the hot glue: if you want a really good bond: cut of a small amount of hot glue, place it where you want to melt it and use your hot air station to melt it (medium temp, low airflow). You bonding will be amazing and it saves you on waiting for it get hot…
coming to this video right after watching their last, the second he talked about a segue i thought about them and then when he said they were his sponsor his sponsor his sponsor his sponsor I laughed so hard lmao
I honestly preferred having one of those Creative Zen MP3 players because they functioned like a drive and made adding music to them, way easier. I hated dealing with iTunes on an iPod.
As usual Apple makes things that should be easy into difficult tasks. It changes the names of everything into random numbers/letters and stores them in random folders. So stupid.
Watching this video really hits home that Canada has produced some of the best tech/self build-related RUclipsrs. We've got Zac Builds, Drew Builds, LTT, Hacksmith etc. We're so lucky! 🇨🇦 Keep up the awesome work! 👍
That's because the billionaires and corporate overlords who decide how America is run just want us all to be mindless consumers. They decided that a dumb populace is much more profitable for them, that's why they're gearing up to eliminate the Dept of Education and put Bibles in classrooms. I wish I was making this up.
Dude! This is something we were really missing! Just the experience of having your favorite 150 songs in your pocket was incredible! I miss having an isolated music device completely separate from my phone.
@@MyLibertyTV No phone is a feature. More to the point, no cloud dependence, attack footprint, data mining, upgrade treadmill, or otherwise vendor-controlled or commerce-oriented software with ulterior motives is a _massive_ feature.
Ya wish the LTT Screw driver came sooner, but unfortunately it didn't make it in time for filming. You better believe youre going to see it in future videos though.
Seeing the rockbox interface brought back so many memories of when I was modding and repairing iPods back in the day. There used to be an ipodLinux distro as well. Usually when I needed more space I would just use a 80gb model back, but that was way before USB C.
I've been telling myself that I'll skip around when I see the long runtime of your videos but I've been watching without hitting the fast forward button once. Great work!
THANK YOU! Never heard of Elite Obsolete Electronics, but now, after years of it gathering dust (in its original box) my iPod Mini 2G can finally get a new click wheel! I accidentally damaged the ribbon cable when I modded the screen to have a red background and replaced the hdd back in like 2009 or something like that xD
Really like this upgrade, especially the haptics, being a subtle but classy change. One side effect of the USB-C change and bulkier backplate is that the iPod won't be compatible with any of the original peripherals and speakers that these used to plug into. I'd love to see you do an upgrade to an old iPod stereo setup.
I not only remember the constant weird endorsements from U2, I remember the time Apple forced a U2 album into everyone's library without permission, and the backlash was so severe that they had to release a special tool to let people remove the album from their Apple accounts.
It has been a while since I modified an iPod, but I believe places sell (or sold) thicker backs specifically designed for the large battery mods. Also, one reason why I went with an older iPod in the first place was actually that it lacked Bluetooth and Wi-Fi. I wanted a device for music at work and I wasn't allowed to have anything with wireless connectivity. The older iPods worked great for that... after swapping the hard drive. The one thing that I wish I could change? Better software for the iPod. I'm pretty sure I looked at RockBox, but I can't remember why I didn't use it in the end. I do recall that my main complaint was the difference between album handling between the iPod and iOS. I think it has to do with there being two Artist tags used for music files where one is more geared toward specifics for a song (e.g., listing a featured artist) and the other is the generic artist (i.e., whose album it is). If I recall, the iPod has no support for the latter, which meant that it kept separating anything with "Artist ft. Other Artist" as separate from "Artist".
I wish RockBox had a full on 'iPod Mode' that took all the exra stuff away. All I want is an iPod with drag and drop, but all the extra settings just clutter the whole thing up for me. There's the iPod Classic theme, but that still has all the 'everything else' exposed.
@@Bob_Smith19 I haven't used it on anything but a CF card or SD card, so I haven't run into that much. But if it is slow on the HD, that's another point against it.
just fyi, place some tape on the SD card. The spring mechanism in the reader does not actually hold the card, and a sudden drop can dislodge the card from the reader. You can also probably wire the bluetooth mod to the hold switch, just put the positive terminal through it (but I am unsure if that woiuld not cause a surge of 5V into the rest of the system, probably will need a diode)
Yeah, I enjoy my music via walkmen Cassette. No interruptions, all my favorite mixes on tape. It's just fun to do and tangible. It's amazing how not having notifications and phone calls interrupt your music really helps you focus.
Get some solder paste, lol. It is slightly sticky for the component until the hot air can start to melt the solder which heats faster because its not stuck to the pad already... paste is a game changer and very easy to use. If you learn to apply the right quantity of paste for the pad and pin size then you can even be sloppy with application and most the time it will perfectly align with the pads when the paste flows.
I have a 160 GB (6th gen?) iPod classic I bought new back in January 2013. Still in working order, with the original battery, with no visible leaking or swelling. Not yet, anyway. Haven't gotten around to modding it and the only changes I'm comfortable to safely attempt are a battery replacement and switching the HDD for an SD or microSD adapter board. I have installed rockbox on it. In fact, you should be able to dual boot rockbox and the native iPod OS on several iPod models, and switch between them by keeping certain buttons pressed during the startup of the device. I decided to keep both because the original iPod OS has a simpler, cleaner, smoother interface, but rockbox was the only way I could find to bypass the loud volume limitation enforced on iPods sold in the EU at the time. I could replace the circuit board with one harvested from an iPod made for the US (or at least non EU) market but I want to keep as much of it original as possible. Alternatively, according to some google searches, I could replace certain chips on the circuit board with ones harvested from non EU boards, but I lack both the hardware and the skill to perform such a feat at this time.
Why would you do all that when you can just buy a cheap mp3 player. Even then I don't get the point of any of this when Spotify exists. It's so cheap it's basically free and I get a way better OS for my music. And it's already with me. Tell me your nerd that doesn't get laid without telling me.
Fucking hell, the EU sucks balls with their restrictions on everything... Australia is literally the best mix of American freedoms and European protections...
@@thatguy6214 - because you can. That's just it. The iPod Classic feels classy and nice. It was peak MP3 for pure audio functionality. And this is voodoo imagination territory but I *feel* like my studio In-Ears sounded a lot better when I tried my old Classic compared to my phone and especially with adapter on the iPad.
Time to dig out my old iPod 5th gen I got... Christmas 2005 - a gift from my first post-college employer. Black as well. Not a fan of the full clear shell you have on this, but I definitely like the storage swap since the full-size iPods still relied on an HDD - the newly-introduced iPod Nano relied on flash storage. The USB type-C swap, though, is definitely needed, too, since compatible charging cables are getting harder to find. Though your other mods took the iPod 5th gen and made it the thickness of the iPod 1st gen.
@@thomgizziz I have a Plex media server and use the Plex app on my phone via a self-hosted VPN. It's served my wife and I well on road trips since I first set that up.
In every meaningful metric, this hackPod is definitely an upgrade. *"Here comes the big, hairy but"* BUTT, one of my favorite aspects of my old iPod was the sound of that mechanical hard drive. Something about that winding-down sound was incredibly satisfying.
I own and flashed a few iPod videos, classics and minis, however I daily drive an iPod Shuffle 1, sometimes a Shuffle 4. When you have 90 gigs of songs, choosing songs for daily commute really becomes a time wasting thing. Then you’ll appreciate the convenience of the Shuffle because it’s just plug and play, giving you no choices.
I've been running a modded iPod 7th gen for years now. I love having my music and podcasts separate from my phone. I'm using the 3000mAh battery and the iFlash Quad with ~900GB with the intent to expand to 2TB in the future
the lost details in the back panel print from pcbway is probably because it was automatically post processed with acetone vapors or alcohol vapors (depending on what kind of plastic they printed it in), the acetone/alcohol will dissolve the surface a tiny bit making it lose some of that detailing you noticed on your print and depending on how the print was oriented when it was dried out, the acetone/alcohol will deposit the dissolved plastic where it sat on the print
Except if you listen to tons of music and over thousands of artists Spotify can provide that. I wish Spotify made a physical MP3 or something. I know they did that car thing but that failed and it wasn’t really a music device
Oh man, I STILL remember my old Video iPod and eventually switching up to a color iPhone. I don’t think I still have it-or it’s in storage somewhere-but I loved that thing. This was an exciting project for sure.
Replacing the nostalgic cold feeling of the stainless steel back and adding the bluetooth in my opinion is a crime to the essence of these childhood gems. It feels wrong. I'm also against the transparent everything trend going on but oh well. Completely changing the premium feeling of cold solid steel is the biggest one.
Nah, steel enclosures look good only at first. Then it turns into a mosaic of scratches and dents pretty quickly. Especially on a device that will be your pocket. It's the same as with piano black finishes. Looks good in promo photos, but turns to crap the instant you turn your back.
@AmartharDrakestone there are etching chemicals to add a frosted finish to metals, you can laminate the housing to keep the durability of stainless steel while avoiding permanent scratches, some people appreciate the patina/scratches/wear and tear that occurs naturally. Or, and hear me out on this one, you take good care of things that you want to keep! Especially something that reminds you of good memories.
Get the 80gb iPod 5.5 because it has a thick back to accommodate the larger battery and other widgets. The 30gb version has a thicker back. Alternatively you can just purchase aftermarket backs.
just for your information... visual impaired people use rockbox because can be added a sound file that reproduce all the menus, and that file can be generated for different languages. Some of my friends use it.
Wish I had the skill to add Bluetooth and usb-c charging but with my luck I’d have my iPod classic sitting around for weeks waiting for replacement parts. Amazing work!
I'd recommend either scoring and snapping instead of the rotary tool for chopping circuit boards, or the least doing it outside. You don't want fiberglass dust to go all over your workshop!
Seeing you mess around with Rockbox was nostalgic. Back in HS, I had the 5th gen iPod video. There wasn't much modding to do back then, but I remember costuming the UI with it, it was so cool. I wish I still had that thing, I've been thinking it would be fun to get an iPod again and upgrade it, although I don't have the skills to do anything too crazy lol. I still even have my external HDD with my crazy huge collection of mp3s I hoarded.
I bought an iPod 5 off that same site. I use current Apple AirPod max headphones with a Bluetooth receiver Velcro’d to the back. Having the Bluetooth mod would be awesome!
I like that LTT doesn't care that a different precision set was used throughout the video. Other sponsors would have a clause in their contracts prohibiting competing brands from appearing in the video.
These things were a game changer on deployments going away from huge DVD/CD wallet to 3 inch magic rectangle saved so much room. I used mine for almost 10 years until it died.
LTT sponsorship on a non-Linus video wasn't something i expected, congrats on becoming honorary LMG now, joking aside, I'm glad the iPod & dedicated media players are having a resurgence
I’m giving my 5th Gen iPod to my son for Christmas. He’s at the age where he’s starting to appreciate music and wants to listen to it on his own. Was going to try Rockbox but I haven’t changed out the hard drive and it runs dog slow on it. I forgot how painful iTunes is to transfer music onto the iPod. Have to convert almost all of it to mp3 since they’re in flac.
I love projects like this. Actual effort and sharing with comunity. Not some indian guy who made "200% efficient 3 phase inverter out of only 3 transistors and 3 resistors that energy compnies dont want you to see" or 2-3 AliExpress blocks wired together with some plugs and thrown in a plastic box.
Very interesting, when I first saw this video I thought "man I would love to do everything here if only iTunes wasn't such a hassle" but then you showed the alternative OS and that speech on music freedom. I agree with everything and congratulate you for inspiring me and other people to do the same
22:16 I stopped using iTunes a long time ago even when using the stock firmware of the iPod. I always used a program called Copy Trans, allowing to sync the files to the iPod without using iTunes. Of course you still require the drivers that iTunes provides, but that’s a very minor detail that’s not bugging me at all.
I've done a few mods to my iPod Photo many years ago. It was great until I wanted more functionality so, now I just use an "old" phone that's 15 years newer. It has a big bright touch screen, built in speaker, a million audio players and apps (real games if wanted), haptic and audio feedback, Bluetooth, more space (hot swappable), much better battery, and more. Best part, it didn't cost me a dime. 😁💪
If you’re gonna have your music as audio files on a device, both android phones and iPhones still have MP3 functionality where you can just put the files into the phones and have the phone work like an mp3 player instead of having to stream music
This was an amazing build and a suggestion maybe figure out a way to turn on and off the Bluetooth board right now it sounds like it's automatically turning on with the hold switch which anyone can access it upon turning on
I think there's a modern market for a high-end music player with local storage... Honestly, I'd love for Apple to make a new iPod Touch with lots of storage. But even if not Apple, I'd like to see someone else do something similar to this: melding the "old" with the "new".
My middle finger to Spotify was setting up a Jellyfin server with all of my music as FLACs and then using Finamp on my phone which connects to it and can even download and transcode music for offline playback. And since it's proxied via a VPS to the outside Internet I can listen to my music wherever there is an Internet browser. However having a physical device only dedicated to music is also nice.
Damn, another great video! Love how you're assembling clear plastic 3D cases for all the builds.... I mean, clear case N64, Gameboy, PSP, and now iPod! How about Nintendo DS for the next video?
U doin a great job at soldering it self but u shoul change solder u using and lower temperatures. As perfect example - solder after getting cold shoul be shiny almost like a mirror. U can achieve it with just great solder and lower temps. Try to find "Kaina Blue 63/37" solder. It's melting point just around 290C and have great rosin core.
I'm probably dumb but I'm curious about the Bluetooth mod. Because with, for example, a smartphone you would have to go to the Bluetooth settings and pick WHICH device you wanted to connect to, but with this it's just a button you press. Does it just connect to the closest bluetooth device in pairing mode? What if there are multiple devices within range that are in pairing mode? Does the custom OS add custom Bluetooth settings? I have a lotta questions-
For a touch of class, use clear cases and paint the inside with a gloss color of your choice. The result looks similar to a deep clear coat finish.
I’ve seen it done on gameboys. It looks incredible!
What's the recommended method of paint application? This sounds awesome
@@tylerevansfoothill Spray paint cans work just fine - do it with a few thin coats letting it properly dry in between so it doesn’t leave thick runs on the inside (even if it does, you won’t see that on the outside unless you’re using a paint with pearl or flake in it). The nice part is it can’t be scratched off from the outside. You can scratch the case, of course, but the color is still there.
Normally I like transparent technology, I think it's looked really good in your past projects. However, I just don't like the look here. Maybe it's because I just think the original color/material design of the iPod is so good and "premium looking".
idk i find original tasteless minimalism
Transparent enclosures work well when you can see the details of the circuitry inside. The don't work as well when your entire back is obscured by a giant battery pack and tons of Kapton tape.
A frosted or solid color look would be better, in my opinion.
But, it's his build. If he likes what he built, that's all that matters.
Nah, green pcb, clickwheel flexible pcb and the giant battery behind is a good fit
@@AmartharDrakestone Yeah, once he had the battery and haptic motor taped in, all I could see was that tape and how it looked bad with a transparent shell. I agree, I'd have at least gone frosted if not a solid color.
I agree, this is very cool but the original black case looks the best imo. To be fair I think it was pretty scratched up.
5:42 PRO TIP - Dont use the windows store version if iTunes, its prone to issues especially with iPods. Use the exe straight from apples website
iTunes from the Microsoft store doesn’t even work.
Pro tip: dont download exe from the internet always use powershell
I wonder why that might be the case.... Better avoid this echo system
Nope @@petergplus6667
@@petergplus6667The real term is "ecosystem", but "echo system" is actually kinda clever
This is the iPod of Theseus
Not really. If I recall correctly, the ship from the paradox had all its parts replaced. This iPod still has some of its original parts.
@AmartharDrakestone If i kept track correctly, the only part remains is the mainboard tho 😅 and even that is partial since the port changed.
@@LateCodeParty There's also the flex wire that goes to the hold button.
@@AmartharDrakestone Paradox also asks the question of "When is it a new ship?". Just the fact that we are discussing this, it is enough evidence to this is the iPod of Theseus
My thoughts exactly I wonder if this is what Theseus used to play his mixtapes while out looking for the Minotaur
blink twice if dankpods has you hostage
Uhhhhhhhh
It's a piece of nugget
👁️👁️
*_blinks 4 times_*
cant forget to put in the puq cells
Tip for the hot glue: if you want a really good bond: cut of a small amount of hot glue, place it where you want to melt it and use your hot air station to melt it (medium temp, low airflow). You bonding will be amazing and it saves you on waiting for it get hot…
He'd then be melting enamel coated wire and stripping off its coating.
@ the glue melts on a way lower temperature then the enamel. Don’t use that high temperatures
LTT being behind the segue in someone else's video is absolutely mind blowing. 👀👀
coming to this video right after watching their last, the second he talked about a segue i thought about them and then when he said they were his sponsor his sponsor his sponsor his sponsor I laughed so hard lmao
I literally just got here from the new LTT vid lmao
@@TheSumOfAnIdeod I just finished theirs 🤣 I'm loving the crossover lol
@@thenono1 same lmao
The reason I upvoted lol
I honestly preferred having one of those Creative Zen MP3 players because they functioned like a drive and made adding music to them, way easier. I hated dealing with iTunes on an iPod.
As usual Apple makes things that should be easy into difficult tasks. It changes the names of everything into random numbers/letters and stores them in random folders. So stupid.
It was both a MP3 player AND was my flash drive for college assignments. Creative was GOATed for that in my eyes.
in 2007 i paid £40 for a 20gb mp3 player lol it literally used a 2.5inch hdd ! was the best price per GB of any device
I’m also team Zen! Mine fell out of my pocket while riding my bike at an intersection and got rolled on by 2 cars. I was very sad.
@@Bob_Smith19idiot
ABSOLUTE NUGGET
dankpods refrence????
@@inhaleFN. yepp
@ smasnug yepp
oh my pkcell
Watching this video really hits home that Canada has produced some of the best tech/self build-related RUclipsrs. We've got Zac Builds, Drew Builds, LTT, Hacksmith etc. We're so lucky! 🇨🇦
Keep up the awesome work! 👍
That's because the billionaires and corporate overlords who decide how America is run just want us all to be mindless consumers. They decided that a dumb populace is much more profitable for them, that's why they're gearing up to eliminate the Dept of Education and put Bibles in classrooms. I wish I was making this up.
You missed my favourite Canadian RUclipsr: AvE.
He is endlessly hilarious. He is a bit more random with his content, but he does dabble with tech.
9:03 W w w w w w w wait! Now LTT is sponsoring other videos? 🤯
Linus teased it in WanShow a few weeks ago. Cool to see it was ZacBuilds he was hinting at
@@ConnorVisser I don't have the patience for WanShow. Too long for me 😅
@@yerachmielb1 Makes a great podcast. Lots of good community engagement.
Yeah super cool. I hope to see a few more creators get sponsored too.
Yes, was very excited to see a message in my inbox from the team over at LTT. Love the screw driver too, its way better than my old one.
24:20 i've never owned an iPod, and when I heard about that battery life I realized it's better than any device that I've ever had.
That's only if the battery hasn't degraded to hell and has been replaced. 16 year old iPods last like two minutes with their OG battery.
Yeah but thats with an updated battery thats also much bigger than the original one
@@megatronskneecapnot true
@@iNSANELYSMART409 does it matter when there's essentially no other modern device doing the same thing comes anywhere close to that?
Dude! This is something we were really missing! Just the experience of having your favorite 150 songs in your pocket was incredible! I miss having an isolated music device completely separate from my phone.
Why?
@@MyLibertyTVNo distractions
@@MyLibertyTV No phone is a feature. More to the point, no cloud dependence, attack footprint, data mining, upgrade treadmill, or otherwise vendor-controlled or commerce-oriented software with ulterior motives is a _massive_ feature.
The phone does all that and infinitely more.
That LTT sponsorship caught me so off guard 😂😂
Especially after earlier in the video when using the iFixit kit!
Ya wish the LTT Screw driver came sooner, but unfortunately it didn't make it in time for filming. You better believe youre going to see it in future videos though.
@@ZacBuilds I'm going to wait on the kit which isn't out yet but the driver can still be purchased.
Not just me then lol
Seeing the rockbox interface brought back so many memories of when I was modding and repairing iPods back in the day. There used to be an ipodLinux distro as well. Usually when I needed more space I would just use a 80gb model back, but that was way before USB C.
someone get this to Dankpods immediately
1 GRIT
I've been telling myself that I'll skip around when I see the long runtime of your videos but I've been watching without hitting the fast forward button once. Great work!
I do my best to keep the edits tight and keep things moving, so thank you for this feedback!
Dankpods and Zac Builds crossover?!
THANK YOU! Never heard of Elite Obsolete Electronics, but now, after years of it gathering dust (in its original box) my iPod Mini 2G can finally get a new click wheel! I accidentally damaged the ribbon cable when I modded the screen to have a red background and replaced the hdd back in like 2009 or something like that xD
0:56 that ain't a knockoff, creative is a legit brand mostly known for their sound blaster sound cards for PCs.
@@mki443 Who asked?
@@Perchanceexposer Joe
@@PerchanceexposerCandice
@@Luigi_bros4321 ligma
@@durillongaming what did I do?
You’re getting pretty good at this right on.
Each project I try to learn something new! You guys are seeing me learn in real time when you're watching these videos.
Really like this upgrade, especially the haptics, being a subtle but classy change.
One side effect of the USB-C change and bulkier backplate is that the iPod won't be compatible with any of the original peripherals and speakers that these used to plug into. I'd love to see you do an upgrade to an old iPod stereo setup.
Now that is a proper shrek pod there
I not only remember the constant weird endorsements from U2, I remember the time Apple forced a U2 album into everyone's library without permission, and the backlash was so severe that they had to release a special tool to let people remove the album from their Apple accounts.
It has been a while since I modified an iPod, but I believe places sell (or sold) thicker backs specifically designed for the large battery mods.
Also, one reason why I went with an older iPod in the first place was actually that it lacked Bluetooth and Wi-Fi. I wanted a device for music at work and I wasn't allowed to have anything with wireless connectivity. The older iPods worked great for that... after swapping the hard drive. The one thing that I wish I could change? Better software for the iPod. I'm pretty sure I looked at RockBox, but I can't remember why I didn't use it in the end. I do recall that my main complaint was the difference between album handling between the iPod and iOS. I think it has to do with there being two Artist tags used for music files where one is more geared toward specifics for a song (e.g., listing a featured artist) and the other is the generic artist (i.e., whose album it is). If I recall, the iPod has no support for the latter, which meant that it kept separating anything with "Artist ft. Other Artist" as separate from "Artist".
I just want to say, this channel is my spirit animal. Please keep doing your thing, it's constantly great content.
I wish RockBox had a full on 'iPod Mode' that took all the exra stuff away. All I want is an iPod with drag and drop, but all the extra settings just clutter the whole thing up for me. There's the iPod Classic theme, but that still has all the 'everything else' exposed.
Create one.
Can't you can just... not look at the extra settings?
My complaint is it’s dog slow on the hard drive. If you haven’t upgraded to a SD card it’s painful. The stock OS just works and is instant.
@@Bob_Smith19 I haven't used it on anything but a CF card or SD card, so I haven't run into that much. But if it is slow on the HD, that's another point against it.
just fyi, place some tape on the SD card. The spring mechanism in the reader does not actually hold the card, and a sudden drop can dislodge the card from the reader.
You can also probably wire the bluetooth mod to the hold switch, just put the positive terminal through it (but I am unsure if that woiuld not cause a surge of 5V into the rest of the system, probably will need a diode)
ipod oled would've been damn impressive
e-ink display would be even better. get ridiculous battery life then.
but e ink makes 240p 3fps
@@Noah10595 so?
@@Noah10595 would work well on a non video ipod
@@Noah10595if you don’t care about album art it doesn’t matter.
8:01 Dude, you have the Patience of Buddha putting that Haptic feedback thing.😭 I would of complained and told the sellers to give me a New one.💀
I swear this videos are some of the best content out on RUclips.
Dankpod
Yeah, I enjoy my music via walkmen Cassette. No interruptions, all my favorite mixes on tape. It's just fun to do and tangible. It's amazing how not having notifications and phone calls interrupt your music really helps you focus.
18:36 The solution for bluetooth pairing is absolutely brilliant!
isnt it always on though because its straight to the battery?
@@mike25620 not much of a problem with the bigger battery
I saw someone else did that before
Get some solder paste, lol. It is slightly sticky for the component until the hot air can start to melt the solder which heats faster because its not stuck to the pad already... paste is a game changer and very easy to use. If you learn to apply the right quantity of paste for the pad and pin size then you can even be sloppy with application and most the time it will perfectly align with the pads when the paste flows.
DankPods would be proud :D
A wireless charging pad at the back would look amazing
I have a 160 GB (6th gen?) iPod classic I bought new back in January 2013. Still in working order, with the original battery, with no visible leaking or swelling. Not yet, anyway. Haven't gotten around to modding it and the only changes I'm comfortable to safely attempt are a battery replacement and switching the HDD for an SD or microSD adapter board. I have installed rockbox on it. In fact, you should be able to dual boot rockbox and the native iPod OS on several iPod models, and switch between them by keeping certain buttons pressed during the startup of the device. I decided to keep both because the original iPod OS has a simpler, cleaner, smoother interface, but rockbox was the only way I could find to bypass the loud volume limitation enforced on iPods sold in the EU at the time. I could replace the circuit board with one harvested from an iPod made for the US (or at least non EU) market but I want to keep as much of it original as possible. Alternatively, according to some google searches, I could replace certain chips on the circuit board with ones harvested from non EU boards, but I lack both the hardware and the skill to perform such a feat at this time.
Why would you do all that when you can just buy a cheap mp3 player. Even then I don't get the point of any of this when Spotify exists. It's so cheap it's basically free and I get a way better OS for my music. And it's already with me. Tell me your nerd that doesn't get laid without telling me.
Nice, I still have mine too! (Original battery too, still holding a good charge) :)
Fucking hell, the EU sucks balls with their restrictions on everything... Australia is literally the best mix of American freedoms and European protections...
@@thatguy6214 - because you can. That's just it.
The iPod Classic feels classy and nice. It was peak MP3 for pure audio functionality.
And this is voodoo imagination territory but I *feel* like my studio In-Ears sounded a lot better when I tried my old Classic compared to my phone and especially with adapter on the iPad.
Definitely recommend, if youre using hot air, to do that BEFORE installing the usbc connector. its super easy to melt the plastic otherwise
Time to dig out my old iPod 5th gen I got... Christmas 2005 - a gift from my first post-college employer. Black as well. Not a fan of the full clear shell you have on this, but I definitely like the storage swap since the full-size iPods still relied on an HDD - the newly-introduced iPod Nano relied on flash storage. The USB type-C swap, though, is definitely needed, too, since compatible charging cables are getting harder to find. Though your other mods took the iPod 5th gen and made it the thickness of the iPod 1st gen.
or just put your mp3s on your phone...
@@thomgizziz I have a Plex media server and use the Plex app on my phone via a self-hosted VPN. It's served my wife and I well on road trips since I first set that up.
@@thomgizziz or just host navidrome or any other music server yourself...
@@thomgizziz I hope you get permanently banned from Earth
In every meaningful metric, this hackPod is definitely an upgrade. *"Here comes the big, hairy but"* BUTT, one of my favorite aspects of my old iPod was the sound of that mechanical hard drive. Something about that winding-down sound was incredibly satisfying.
Awesome loved the video. How about adding a wireless charging coil to the back of that bad boy.
Hughjeffry already did this mod. Its so cool😊
Totally, check out my PSP video if you want to see how!
20:21 BEST Commercial of all TIME! I bought LOTS of SONY products because of that advert! Excellent work, Zac! Cool build!
Hey! I wanted that older cable! 13:21
I hope he didn’t really throw out the cable, not responsible e-waste.
I own and flashed a few iPod videos, classics and minis, however I daily drive an iPod Shuffle 1, sometimes a Shuffle 4. When you have 90 gigs of songs, choosing songs for daily commute really becomes a time wasting thing. Then you’ll appreciate the convenience of the Shuffle because it’s just plug and play, giving you no choices.
Two videos within a week! Wow.
Money's tight.
Right
I've been running a modded iPod 7th gen for years now. I love having my music and podcasts separate from my phone. I'm using the 3000mAh battery and the iFlash Quad with ~900GB with the intent to expand to 2TB in the future
All I think I'd dank pods video on making a modern iPod. Well done this is alot crazier
I have been thinking about building something like this for many years now, glad to see someone actually did it!
Now you need to have dankpods review it.
Next, do Zune. It would be absolutely amazing to see new Zune mods after all these years
LTT supporting youtubers is wonderful
I agree ;)
the lost details in the back panel print from pcbway is probably because it was automatically post processed with acetone vapors or alcohol vapors (depending on what kind of plastic they printed it in), the acetone/alcohol will dissolve the surface a tiny bit making it lose some of that detailing you noticed on your print and depending on how the print was oriented when it was dried out, the acetone/alcohol will deposit the dissolved plastic where it sat on the print
My iPod is one of my most treasured possessions and I still use it constantly. It's way better than Spotify.
Except if you listen to tons of music and over thousands of artists Spotify can provide that. I wish Spotify made a physical MP3 or something. I know they did that car thing but that failed and it wasn’t really a music device
Oh man, I STILL remember my old Video iPod and eventually switching up to a color iPhone. I don’t think I still have it-or it’s in storage somewhere-but I loved that thing. This was an exciting project for sure.
Micro soldering blows my mind, great skills!
I LOVE the solution that you came up with to solve Bluetooth pairing. Awesome work!
Replacing the nostalgic cold feeling of the stainless steel back and adding the bluetooth in my opinion is a crime to the essence of these childhood gems. It feels wrong.
I'm also against the transparent everything trend going on but oh well.
Completely changing the premium feeling of cold solid steel is the biggest one.
Nah, steel enclosures look good only at first. Then it turns into a mosaic of scratches and dents pretty quickly. Especially on a device that will be your pocket.
It's the same as with piano black finishes. Looks good in promo photos, but turns to crap the instant you turn your back.
@AmartharDrakestone there are etching chemicals to add a frosted finish to metals, you can laminate the housing to keep the durability of stainless steel while avoiding permanent scratches, some people appreciate the patina/scratches/wear and tear that occurs naturally.
Or, and hear me out on this one, you take good care of things that you want to keep!
Especially something that reminds you of good memories.
Yes! RockBox _does_ totally rock. I have it on multiple devices and it works fine with everything I have.
0:39 MP3 players out here like, "Am I a joke to you??"
Get the 80gb iPod 5.5 because it has a thick back to accommodate the larger battery and other widgets. The 30gb version has a thicker back. Alternatively you can just purchase aftermarket backs.
I had a Zune... 🤣
Oh man.. I had a Creative zen nomad jukebox NX in high school and was always jealous of the iPod kids, great throwback! 0:57
Theseus just called, he wants his ship back.
Fantastic comment, internet person.
just for your information... visual impaired people use rockbox because can be added a sound file that reproduce all the menus, and that file can be generated for different languages. Some of my friends use it.
Very nice project. One last thing is missing: wireless charging...
You just Frankenstein that ipod. The best build OG devices with modern tech.
These videos, I promise, are among the greatest available on RUclips.
Wish I had the skill to add Bluetooth and usb-c charging but with my luck I’d have my iPod classic sitting around for weeks waiting for replacement parts. Amazing work!
I'd recommend either scoring and snapping instead of the rotary tool for chopping circuit boards, or the least doing it outside. You don't want fiberglass dust to go all over your workshop!
Seeing you mess around with Rockbox was nostalgic. Back in HS, I had the 5th gen iPod video. There wasn't much modding to do back then, but I remember costuming the UI with it, it was so cool. I wish I still had that thing, I've been thinking it would be fun to get an iPod again and upgrade it, although I don't have the skills to do anything too crazy lol. I still even have my external HDD with my crazy huge collection of mp3s I hoarded.
I bought an iPod 5 off that same site. I use current Apple AirPod max headphones with a Bluetooth receiver Velcro’d to the back. Having the Bluetooth mod would be awesome!
I like that LTT doesn't care that a different precision set was used throughout the video. Other sponsors would have a clause in their contracts prohibiting competing brands from appearing in the video.
When I was much younger, I wanted this iPod since I always liked the form factor. Now I really want THIS one.
These things were a game changer on deployments going away from huge DVD/CD wallet to 3 inch magic rectangle saved so much room. I used mine for almost 10 years until it died.
LTT sponsorship on a non-Linus video wasn't something i expected, congrats on becoming honorary LMG
now, joking aside, I'm glad the iPod & dedicated media players are having a resurgence
also, is a personal taste thing, but i feel for iPods the full clear doesn't fully work, maybe frosted white/color or solid metallic
I’m giving my 5th Gen iPod to my son for Christmas. He’s at the age where he’s starting to appreciate music and wants to listen to it on his own. Was going to try Rockbox but I haven’t changed out the hard drive and it runs dog slow on it. I forgot how painful iTunes is to transfer music onto the iPod. Have to convert almost all of it to mp3 since they’re in flac.
rockbox is an absolute must. had one of these ipods back in the day and itunes was always horrible so i put rockbox on it and never looked back.
I love projects like this. Actual effort and sharing with comunity.
Not some indian guy who made "200% efficient 3 phase inverter out of only 3 transistors and 3 resistors that energy compnies dont want you to see" or 2-3 AliExpress blocks wired together with some plugs and thrown in a plastic box.
Got a good recommendation after this
ruclips.net/video/PJccc3qpPh0/видео.html
I built an Ultrawide DS ... a DIY Steam Deck thingy. /@MarcinPlaza
Very interesting, when I first saw this video I thought "man I would love to do everything here if only iTunes wasn't such a hassle" but then you showed the alternative OS and that speech on music freedom. I agree with everything and congratulate you for inspiring me and other people to do the same
22:16
I stopped using iTunes a long time ago even when using the stock firmware of the iPod. I always used a program called Copy Trans, allowing to sync the files to the iPod without using iTunes. Of course you still require the drivers that iTunes provides, but that’s a very minor detail that’s not bugging me at all.
I've done a few mods to my iPod Photo many years ago. It was great until I wanted more functionality so, now I just use an "old" phone that's 15 years newer. It has a big bright touch screen, built in speaker, a million audio players and apps (real games if wanted), haptic and audio feedback, Bluetooth, more space (hot swappable), much better battery, and more. Best part, it didn't cost me a dime. 😁💪
Fun fact: In iTunes the icon for Artists is actually a rendering of Bono from U2.
Cool build.
This is the conformation I needed to do this work to my ipod classic. This is legit perfect.
I'll never agree that transparent electronics look good, but I do love the mods! Well done
Dude, you and Doug DeMuro need to do a video together ASAP. Glad I stumbled onto these videos, but the two of you would be magic, RUclips magic.
If you’re gonna have your music as audio files on a device, both android phones and iPhones still have MP3 functionality where you can just put the files into the phones and have the phone work like an mp3 player instead of having to stream music
I LOVE transparent electronics. This is amazing.
The birth of the mythical super nugget!
LTT sponsorship is so strange but strangely so welcome at this stage ✌🏻
Wonderful soldering job. Wish I had the chance to do this kind of soldering at work, but they have me doing stupid easy stuff.
This was an amazing build and a suggestion maybe figure out a way to turn on and off the Bluetooth board right now it sounds like it's automatically turning on with the hold switch which anyone can access it upon turning on
when you said "this" at 6:50.... this guy is the tech doug demuro
I think there's a modern market for a high-end music player with local storage... Honestly, I'd love for Apple to make a new iPod Touch with lots of storage. But even if not Apple, I'd like to see someone else do something similar to this: melding the "old" with the "new".
My middle finger to Spotify was setting up a Jellyfin server with all of my music as FLACs and then using Finamp on my phone which connects to it and can even download and transcode music for offline playback. And since it's proxied via a VPS to the outside Internet I can listen to my music wherever there is an Internet browser. However having a physical device only dedicated to music is also nice.
Damn, another great video! Love how you're assembling clear plastic 3D cases for all the builds.... I mean, clear case N64, Gameboy, PSP, and now iPod! How about Nintendo DS for the next video?
The combination hold switch/bluetooth pairing button is so perfect and elegant, love it!
U doin a great job at soldering it self but u shoul change solder u using and lower temperatures. As perfect example - solder after getting cold shoul be shiny almost like a mirror. U can achieve it with just great solder and lower temps. Try to find "Kaina Blue 63/37" solder. It's melting point just around 290C and have great rosin core.
20:24 you missed the chance to use some bambu lab effect sheets
I'm probably dumb but I'm curious about the Bluetooth mod. Because with, for example, a smartphone you would have to go to the Bluetooth settings and pick WHICH device you wanted to connect to, but with this it's just a button you press. Does it just connect to the closest bluetooth device in pairing mode? What if there are multiple devices within range that are in pairing mode? Does the custom OS add custom Bluetooth settings? I have a lotta questions-
That is a throwback. I never owned an iPod just the generic MP3 players. What fun!