I used smart vinyl with my joy the first time the other day and was shocked at the big gap it left at the top. I thought how wasteful that was. I'm glad I'm not the only one who thought that. I do love the portability of my Joy over my EA2, but I am not jumping at smart vinyl unless it's on sale (a lot).
Love the video, I was thinking about getting the Cricut Joy because I am living with my daughter and ALL my craft stuff is in storage. When I looked at the prices for the SMART products, I thought it was too expensive, but after watching your video I am going to buy a Cricut Joy tomorrow. I live in Canada but I am for sure going to check out the Orocal vinyl to see if they ship to Canada. Keep the fun, joyful video's coming. By the way you are so positive, it is infectious, thanks again.
By far this is the best you tube channel I've seen. Also Mr. Crafty Pants the details are phenomenal and you make this very user friendly. That's what im talking about!!! Killing it.
I am a Cricut newby. I got a Joy for Christmas and have only done a few things, all with Cricut Smart products. Thank you so much so your videos explaining ways to use other products and just being a delight to watch and learn from!
Supper helpful! I just bought my first cutting machine, a joy. I only bought smart vinyl which I have a very hard time getting to transfer. Your is the first video I watched to explain using regular vinyl. I will be running to the store today for regular vinyl. Thank you!
Aloha Mr. CP! I’ve been looking for something to replace my label maker and cost of engraving annual Xmas and birthday gifts for my keiki. Oh my goodness gracious golly gee willikers WOW!!! Your demeanor, sincerity, and enthusiasm shines through and resonated with me. I think I’ve found the solution thanks to you. I have a feeling I might be starting a new hobby! Mahalo for your channel and you being YOU. Happy Hawaiian Hugz!
Thanks for the hack!!!! best thing ever!💕💕💕 Just tried this and YAY it worked!!! no more wasting money on smart vinyl for larger then mat project on the Cricut joy. keep up the great work!
When I’m doing bigger projects, I like to move all the designs close together so there’s very little waste and no mat would be so much easier so I don’t waste the stickiness of my mats. But if I’m doing a small project using up scraps, it makes a lot more sense to put it on the mat and use SnapMat to maximize the use of scraps.
this has been super helpful as I have stopped using my joy...it seems that it butchers my vinyl unless i use smartvinyl...i tried this and it still but through it even on less pressure..its the original blade because ive barely used it since I got it almost a year ago
Love your videos! I just tried to cut on cricut smart vinyl and when I went to pull off the excess vinyl, my design did not cut through. Can you tell me what I did wrong.
I was about to return my CJ today and thank God i found your video. I was doing it wrong applying more pressure and using the mat, the Vinyl was getting jammed or it would cut trough... thanks!
I’m new to your channel. Great content. I have both the circuit and joy circuit. I’m so happy I came across your tutorial. The last thing I want is to purchase more matts.
Thank you for this informative video-I also like both of your honest views on this video and I agree with you whatever your choice leaving it to each individual-thank you I can't wait for your next video-big hugs to you
Thank you so much, Patsy! That means so much! I always want to be extremely honest with my personal thoughts/review on something, but also want each person to be able to make their own informed decision. 😊
Nice video m8 i want to use permanent vinyl for stickers, but i want to airbrush onto the surface like a sunburst effect , can you recommend a vinyl that's permanent and would accept paint ?
I love this video.. I have a question Can I use the Cricut Joy to make stencils for etching glass projects and can you make video for that.. thank you 😊 💓
Newbie here.... do you change the pressure of the blade because of the vinyl you are cutting or to save the edge on the blade for a longer life? Loving the Cricut Joy and can't wait to personalize fun items for family/friends.
I just bought my cricut joy 2 weeks ago. It is my first cutting machine ever! Love the few videos I’ve seen already. Will this work on card stock also? TIA!
Hi Mr. Crafty Pants. I totally enjoyed your video tutorial. I will have to say though that the ending took me by surprise. I felt like why show this video if your opinion was to note that there will be e=wasted material when using vinyl without a mat. As you know crafters waste nothing. lol with that said, it was good to know but !. Thanks.
You can, but you would have to lay out the smart vinyl onto a 12” cutting mat designed for the Maker. Keep in mind that the smart vinyl has a thicker backing. This causes the vinyl to be lifted higher off of the mat than usual and closer to the blade. You will need to take that into account when choosing your pressure settings for the blade. I would do a test cut with “less” pressure to see how that works for you. 😊
Technically, yes! It’s more cost effective to use the regular sized vinyl on the explore air 2, but if you’re in a pinch, you can just apply the Cricut Joy Smart Vinyl to a Cricut cutting mat and cut it that way. Just keep in mind that you’re most likely going to need to switch your pressure to “less”
I am new to Cricut and you channel (which I LOVE). Do you have any tips and tricks for cutting stickers I have printed from my printer on the Joy like I see everyone is able to do with the other Cricut machines? I have been searching and can't find anything, they just say about "print" aka drawing with the pen and cut...
Hello! What would happen if I forget to select "less" pressure? Would it end up wrecking the Joy machine or simply cut through the vinyl backing? Thanks so much for your wonderful video!!
Sydney Taufen, if it’s still a fairly new blade that hasn’t made a significant amount of cuts so far, it “could” potentially cut through the vinyl backing and depending on how thick your material is, it could even damage the surface of the machine below it. That’s obviously a worst case scenario though. 😊
OMG Thanks so much for your Amazing Share. I was just wondering about this exact subject as i was scouring thru my Cricut Iris Supply boxes yesterday...guess you read my mind> LOL I love your honesty and Extremely Detailed Tutorials. Always appreciate your Tremendously Terrific Tips, Tricks & Techniques! You definitely are passionate about your Cricuts and it shows immensely and this means allot!! Can't wait to try some of my other Cricut Vinyls tomorrow!! hanks for all you do and the way you do it!!! YOU SO ROCK!! Joan Smith
Ok last comment, I love love love that you do NOT allow cursing on your fb page! I love a man with standards! I’m so proud I found you! I’m a total newbie! After 5 kids I need a hobby that might make a little money just selling around my community. Plus I can make things for myself and my family. I’m NOT doing shirts, mugs, tumblers, keychains, etc. I found something no one in my area is doing so I’m gonna try that. I like to be unique. I may do some of those things for my family if they ask but that’s it. Lol. Right now I’m trying to get my 2 walls in my bedroom renovated into a craft space. I’d love to know what storage products you like and use. And if you didn’t have an entire room maybe just a wall or 2 how you would design it? Anyway, love love love your channel!
See this is what I don't understand I bought that same vinyl at Michael's and for some reason my cricut joy does not like it I've tried this hack in for some reason my cricut just hates this vinyl I do not understand why
Thanks for the tip! If I use the mat as recommended, do I still use the Smart settings and light pressure? Sorry for the stupid question, I'm a total newbie!
When I got my Cricut Joy this week and used the sample piece of vinyl that came with it I was really annoyed by how much dead space was left at the top before cutting. I would much rather use a mat and not waste so much material. I also want to give a thumbs up for Oracal vinyl. Way, way cheaper than Cricut brand and it's made in the USA, not China. Also look for Siser HTV for iron on. Again, cheaper than Cricut and made in the USA. Even when Cricut has 50% off sales their stuff is still twice as expensive as other brands. Love my Cricut Joy & Maker, don't love the Cricut materials as much although I have bought my fair share.
You explain these things very well! I love how clear you speak!!
I used smart vinyl with my joy the first time the other day and was shocked at the big gap it left at the top. I thought how wasteful that was. I'm glad I'm not the only one who thought that. I do love the portability of my Joy over my EA2, but I am not jumping at smart vinyl unless it's on sale (a lot).
Thanks for the tip. I am new to Cricut and have enjoyed watching your tutorials.
Absolutely! What a waste!
This has literally been THE MOST HELPFUL TUTORIAL EVER!!!!! thank you so much crafty friend
Right now I’m using smart vinyl on my maker and it works fine I like your videos
I just got a Cricut Joy and I’m learning so much from you. You are awesome to follow.
love your videos its mostly women that do the videos,
I watch a lot of your video tutorials.
Because of your videos, I’ve purchased the Cricut Joy! Love your videos :)
Thank you!!! I just got a joy today and thank goodness I waited to buy smart vinyl and other joy vinyls. Please more hacks and tips for the Joy.
I just got a Cricut Joy and ended up on your channel, love your content! 🖤
My first Cricut machine, the Joy, is on its way. I'm so excited! Looking forward to learning more on your channel. 💖💜💖
Love the video, I was thinking about getting the Cricut Joy because I am living with my daughter and ALL my craft stuff is in storage. When I looked at the prices for the SMART products, I thought it was too expensive, but after watching your video I am going to buy a Cricut Joy tomorrow. I live in Canada but I am for sure going to check out the Orocal vinyl to see if they ship to Canada. Keep the fun, joyful video's coming. By the way you are so positive, it is infectious, thanks again.
I’ve just found your channel! I’m so excited to binge watch all of your content and make along! 😍
By far this is the best you tube channel I've seen. Also Mr. Crafty Pants the details are phenomenal and you make this very user friendly. That's what im talking about!!! Killing it.
Thank you so much, Teresa! That just made my night! 😊
I am a Cricut newby. I got a Joy for Christmas and have only done a few things, all with Cricut Smart products. Thank you so much so your videos explaining ways to use other products and just being a delight to watch and learn from!
You are my go to cricut joy helper! Thank you!!
You are an awesome teacher! Thanks for sharing your gift and knowledge!!!
You are so welcome! I'm glad it has been helpful 🤩
I have so much to learning about everything to with cricut joy. Thank you
just what i was looking for - thank you for sharing AND you dropped this on my bday ayyeee!
Supper helpful! I just bought my first cutting machine, a joy. I only bought smart vinyl which I have a very hard time getting to transfer. Your is the first video I watched to explain using regular vinyl. I will be running to the store today for regular vinyl. Thank you!
Thanks for the tricks and tips. I'm a newbie so all this info is greatly appreciated! Thanks for sharing.💜
Aww, thank you so much, Colleen! Just take it 1 project at a time! 😊❤️ You’ll do great!
OMG just discover you and Love your tutorials, you make so easy to understand. Just subscribed..... cannot wait to see what else you will teach us.
Your video was super helpful in so many more ways than I had tuned in for. Thank you!
Aloha Mr. CP! I’ve been looking for something to replace my label maker and cost of engraving annual Xmas and birthday gifts for my keiki. Oh my goodness gracious golly gee willikers WOW!!! Your demeanor, sincerity, and enthusiasm shines through and resonated with me. I think I’ve found the solution thanks to you. I have a feeling I might be starting a new hobby! Mahalo for your channel and you being YOU. Happy Hawaiian Hugz!
I knew there had to be a way! Thank you!!! Thank you!!! Thank you!!! I just ordered a new maker 3 and I’m so using this hack!
Do you have a tutorial on how to use different color pens for one project? I have a Joy
Thanks for the hack!!!! best thing ever!💕💕💕 Just tried this and YAY it worked!!! no more wasting money on smart vinyl for larger then mat project on the Cricut joy. keep up the great work!
Great Video I was lost in the sauce trying to figure out how to use 12 in vinyl with the joy!! You rock!!!
Thank you for this very helpful and money saving information.
I learn so much from your videos
You're so sweet, thank you so much 🥰🥰
I joy got my cricut joy and i love it,Thank so much
Thank you 😊 you are doing great 👍🏼 hope your Channel grows quickly and success comes your way you deserve it!!
Awww, thank you Georgie! You’re so sweet! ❤️❤️❤️
Went to Michael’s today and got offbrand vinyl, did the same thing and it worked like a charm 🤘🏻
I am learning so much all in 1 day
TFS
You’re so welcome, Judi! I’m so glad! 😊❤️
Hey I’m glad I found you I absolutely love your teaching style Thank you so much❤️
Thank you your videos are helping me so much ! so through appreciate it
LOVE your videos. Keep them up
When I’m doing bigger projects, I like to move all the designs close together so there’s very little waste and no mat would be so much easier so I don’t waste the stickiness of my mats. But if I’m doing a small project using up scraps, it makes a lot more sense to put it on the mat and use SnapMat to maximize the use of scraps.
Omg thank so much bc it wouldnt let me with some projects to have the option of using a mat. Thank you thank you!🥰
Can you use Cricut smart vinyl on the Cricut maker ?
Thank you for this! It has made a huge difference for me!!
Man, u sure nail your vids.
Can you buy large rolls of smart vinyl rolls and cut it down for the Cricut joy ? Will it work? And use it without a mat as well.
thank you for this...I tried it w adhesive stencil material, but sadly, cut thru the backing :(
this has been super helpful as I have stopped using my joy...it seems that it butchers my vinyl unless i use smartvinyl...i tried this and it still but through it even on less pressure..its the original blade because ive barely used it since I got it almost a year ago
Love your videos! I just tried to cut on cricut smart vinyl and when I went to pull off the excess vinyl, my design did not cut through. Can you tell me what I did wrong.
I can not find a precise trimmer its so frustrating!! do you have any suggestions for a 5.5 straight line?
I was about to return my CJ today and thank God i found your video. I was doing it wrong applying more pressure and using the mat, the Vinyl was getting jammed or it would cut trough... thanks!
I’m new to your channel. Great content. I have both the circuit and joy circuit. I’m so happy I came across your tutorial. The last thing I want is to purchase more matts.
Thank you for this informative video-I also like both of your honest views on this video and I agree with you whatever your choice leaving it to each individual-thank you I can't wait for your next video-big hugs to you
Thank you so much, Patsy! That means so much! I always want to be extremely honest with my personal thoughts/review on something, but also want each person to be able to make their own informed decision. 😊
Question, I accidentally bought the infusible ink pens for the Joy but have the air 2. Will I be able to use those pens?
You should be fine
Sweet! Thanks for sharing this info!
Ok so if I use a mat what material do I select . . I don't think it gave me any option other than smart vinyl???
Hello Mr Crafty, is there anything specific thickness of the vinyl you used? Or is all vinyl same thickness?
I’m looking to buy one can I do custom logos from like photos or something ?
I don’t need a big machine and will only be cutting vinyl. Is they a quality difference between the maker and joy?
Nice video m8 i want to use permanent vinyl for stickers, but i want to airbrush onto the surface like a sunburst effect , can you recommend a vinyl that's permanent and would accept paint ?
How do I add different layers?Your videos Help. Thank you
This did not work for me.... will it work on the removable vinyl?
Can we purchase a matt finish, iron on vinyl ?
Can you pls recommend vinyl i can buy on Amazon greetings from all tha way in Jamaica!!! Love love your channel you have no idea your a big help .
I love this video..
I have a question
Can I use the Cricut Joy to make stencils for etching glass projects and can you make video for that.. thank you 😊 💓
Hi Mr. CraftyMichael Pants! Ken Hess sent me over here.
Hi Norma! I absolutely love Ken & Sean! So glad you’re here! 😊❤️
GREAT FAB video, Thanks for the tips. New Subscriber x
How do you make sure that the blade cuts the scrap correctly? I thought I did it right but ended up accidentally cutting part of my mat.
Newbie here.... do you change the pressure of the blade because of the vinyl you are cutting or to save the edge on the blade for a longer life? Loving the Cricut Joy and can't wait to personalize fun items for family/friends.
Hey thanks for watching!! We change the pressure for the blade based on the material we are cutting 🤩
@@mrcraftypants thank you! Loving the content!
Ty awesome information to know 👍
Can u do print and cut on Cricut joy ?
Love this video. I’m considering the joy to use with other vinyl. But can I use my own font and designs?
I just bought my cricut joy 2 weeks ago. It is my first cutting machine ever! Love the few videos I’ve seen already. Will this work on card stock also? TIA!
Hi Mr. Crafty Pants. I totally enjoyed your video tutorial. I will have to say though that the ending took me by surprise. I felt like why show this video if your opinion was to note that there will be e=wasted material when using vinyl without a mat. As you know crafters waste nothing. lol with that said, it was good to know but !. Thanks.
Glad you enjoyed it! :)
Great video! Conversely, could I use smart vinyl on my Maker?
You can, but you would have to lay out the smart vinyl onto a 12” cutting mat designed for the Maker. Keep in mind that the smart vinyl has a thicker backing. This causes the vinyl to be lifted higher off of the mat than usual and closer to the blade. You will need to take that into account when choosing your pressure settings for the blade. I would do a test cut with “less” pressure to see how that works for you. 😊
This is genius! Thank you
Can I use smart vinyl on a backpack? I’m a newbie this vinyl doesn’t say anything about ironing so I wasn’t sure if it would stick.
If it doesn't mention heat anywhere on it I wouldn't use an iron on it
Just checked on Amazon Canada and they have great prices on the vinyl.
Another great video. Thank you ❤️❤️
Thank YOU so much! 😊❤️
I want to start with cutting out images from fabric. I need help.
Ugh, I just tried this and it cut all the way through the vinyl I used. Also, the smaller images did not cut out properly. Tried this twice and failed
This is just what I needed!
How to cut extra long cuts without a mat?
❤️ great video!! Thank you so much for the discount code!!!
Thank YOU! 😊❤️ You’re so sweet!
Can the joys vinyl be used on explorerair2?
Technically, yes! It’s more cost effective to use the regular sized vinyl on the explore air 2, but if you’re in a pinch, you can just apply the Cricut Joy Smart Vinyl to a Cricut cutting mat and cut it that way. Just keep in mind that you’re most likely going to need to switch your pressure to “less”
Thanks for this video. Let me ensure that I understand. Are you saying 🤔 use the non-smart vinyl, but on the joy mat?
Would love to know this too -I’m a little confused!
Yes with less pressure
I am new to Cricut and you channel (which I LOVE). Do you have any tips and tricks for cutting stickers I have printed from my printer on the Joy like I see everyone is able to do with the other Cricut machines? I have been searching and can't find anything, they just say about "print" aka drawing with the pen and cut...
awesome video thanks
Hello! What would happen if I forget to select "less" pressure? Would it end up wrecking the Joy machine or simply cut through the vinyl backing? Thanks so much for your wonderful video!!
Sydney Taufen, if it’s still a fairly new blade that hasn’t made a significant amount of cuts so far, it “could” potentially cut through the vinyl backing and depending on how thick your material is, it could even damage the surface of the machine below it. That’s obviously a worst case scenario though. 😊
I was wondering the same thing! Good to know!
Thanks for sharing.
Tickles your pickle lol love it
Thank you!!!!
Do you have to pay to use the fonts and designs or could I make my own? Thinking about buying myself one for 🎄.
Love your videos! Where did you get your paper cutter?! They are my colors! 😊
I got it off of Amazon! Here’s the link: amzn.to/2MVOQLN
I’m not sure if it comes in that exact color anymore or not, though.
OMG Thanks so much for your Amazing Share. I was just wondering about this exact subject as i was scouring thru my Cricut Iris Supply boxes yesterday...guess you read my mind> LOL I love your honesty and Extremely Detailed Tutorials. Always appreciate your Tremendously Terrific Tips, Tricks & Techniques! You definitely are passionate about your Cricuts and it shows immensely and this means allot!! Can't wait to try some of my other Cricut Vinyls tomorrow!! hanks for all you do and the way you do it!!! YOU SO ROCK!!
Joan Smith
You always make my day, Joan! Always!! You’re so sweet!! Thank you so much!!! 😊❤️
Wow your Amazing
Ok last comment, I love love love that you do NOT allow cursing on your fb page! I love a man with standards! I’m so proud I found you! I’m a total newbie! After 5 kids I need a hobby that might make a little money just selling around my community. Plus I can make things for myself and my family. I’m NOT doing shirts, mugs, tumblers, keychains, etc. I found something no one in my area is doing so I’m gonna try that. I like to be unique. I may do some of those things for my family if they ask but that’s it. Lol. Right now I’m trying to get my 2 walls in my bedroom renovated into a craft space. I’d love to know what storage products you like and use. And if you didn’t have an entire room maybe just a wall or 2 how you would design it? Anyway, love love love your channel!
I've never used a mat with my Joy, no matter the vinyl. So simple
See this is what I don't understand I bought that same vinyl at Michael's and for some reason my cricut joy does not like it I've tried this hack in for some reason my cricut just hates this vinyl I do not understand why
Thanks for the tip!
If I use the mat as recommended, do I still use the Smart settings and light pressure?
Sorry for the stupid question, I'm a total newbie!
I whant to know that too😅
I'd like to know this too
Havw you found a trick to print and cut with the cricut joy?
Does anyone know how to yet? Lol
👀
I can’t wait to use tickle your pickle!!! I love it!!! 🤣🤣🤣❤️❤️❤️
When I got my Cricut Joy this week and used the sample piece of vinyl that came with it I was really annoyed by how much dead space was left at the top before cutting. I would much rather use a mat and not waste so much material. I also want to give a thumbs up for Oracal vinyl. Way, way cheaper than Cricut brand and it's made in the USA, not China. Also look for Siser HTV for iron on. Again, cheaper than Cricut and made in the USA. Even when Cricut has 50% off sales their stuff is still twice as expensive as other brands. Love my Cricut Joy & Maker, don't love the Cricut materials as much although I have bought my fair share.
I completely agree about the dead space. I personally don’t mind using a mat, but I get that some people do. I LOVE, LOVE Siser as well! 😊❤️
You are such a Cutie Pie and Helpful. Thanks Honey...can I join your FB page
Wanting to purchase my first Craft machine -the joy😊