Programming a rolling code garage door opener to 2021 MB GLE 350
HTML-код
- Опубликовано: 3 фев 2021
- I have a liftmaster MyQ 2.0 with a simple rolling code and spent about three days trying to program it without a sun visor remote. This video covers how I finally got it to work.
Хобби
YOU ROCK!! Your hack worked like a charm ;) Thank you for saving me 3 days (which likely would have been more like 30 days!) of frustrations 😂
It worked! Even though I have no green light on my mirror. Thank you sir. Better than dealing with the Mercedes Benz service asdsholes!
Man you were absolutely right, the manuals and all of these other videos wasted my time, I watched your video and in 2 minutes I got it to work, I appreciate your help.
This worked. I followed the instructions in the owner's manual over & over - nothing worked!!!!! I followed the instruction in this video and IT WORKED. Thank you for your help.
Awesome!!! I’ve been trying to program my E300 for a month!!!! You helped in 2 minutes!!!
Worked for my Liftmaster Garage Opener pairing with GLS 450. Thank you!
Thank you, thank you, thank you!!! I have been trying all kinds of things with my BMW. Followed your instructions and finally got it!!! :)
I just tried on my BMW and it still doesn’t work. Now when I press the buttons in my car the mirror light flashes green
Thank you. I’ve been trying to do by the manual for two days couldn’t get it but after your video it took me two seconds.
Thank you! I have a remote and as you said the trick is not to stop pressing the button until the light stops flashing. Took a few seconds..
THANK YOU!!! Worked like a charm for my 2020 Mercedes GLB 250
Thank you so much we were trying for over an hour
Amazing. Thank you so much. Very helpful.
This worked!! Thank you!! About to lose my mind over this
THANK YOU, THANK YOU, THANK YOU! I just got a 2021 GLE and have the same garage door opener and NO remote. I tried all morning without any luck using the Mercedes instructions. In the Mercedes instructions, it said to have your engine off and it didn’t work, even with your instructions. I turned on my engine and using your instructions was able to connect the first time. Mercedes, you need to do a better job!
I have the exact same car but no problem in the 2021 GLE 350. Worked just as it’s supposed. My demon is in the 2017 E400 convertible. I may have to give this a whirl.
I’m watching this wide after 3 hours trying with my mercedes 🥵
I will try this now
Just got a 2022 GLE350 and this video didn't work but the Owner's Manual worked perfect the first time. Not sure what is different from 2021 to 2022. According to manual, program with remote first then move on to rolling code section (ensure you are within range).
I’m trying to do the same with my car and I have a genie 2128. I tried what you told me and still no go. This is getting frustrating and I can’t seem to figure this out
You are the best
Thank you so much
Thank you so much for this! I wasted half as much time as you did and am so grateful for your video! It took me 2 minutes to set it up after viewing this. Why the proper instructions were not accessible to begin is beyond me! You’re the best! ☺️🙌🏼🙏🏼❤
Brother, I am the former owner of a computer company and consider myself reasonably intelligent and have spent a ton of time on this *#!&ing thing. Still no luck(.
This video could have been less than a minute if you didn't Bloviate for 4 minutes !
You r right?. I'm holding 1 and 3 forever nothing happens. I'm still trying probably I will pull visor off holding holding these hard buttons. IN 21st century somethings unfortunately never change or improve.
Well you should definitely fast-forward the video to 4min and skip all the unnecessary blah blah blah!
This would be good if it didn't take 3days
For gods sake …..just puke out the process. Took me a 16 days to figure out thy you need to have acc power on. Which would have been great at Minute 1 and would have resolved the problem. Useless.
Get to the fucking point !!!!!!