Dodge RAM 1500 Noisy Rear Differential Diagnose and Repair part Three

This is part 3 and final video for the repair titled: " How to diagnose and repair Rear Differential Noise on Dodge RAM 1500 Pick-up Trucks".
This video shows how to Install the Pinion back on the Differential and How to Set the correct Pinion Bearing Pre-load.
It also explains how to install a new Pinion Seal.
This video also shows how to set the correct Backlash on the Ring and Pinion using a Dial Indicator and how to Pre-load the Differential Carrier Bearings.
It also shows how to install new wheel seals.
We also have a video where our Pretty Tech Jo explains how to Press the Pinion Bearing on and off, this is the link to the video:
• Beautiful Brunette sho...
Pinion Bearing failure is a common problem on Dodge 1500 Pick-up Trucks, specially if the Gear Oil is not changed at the recommended intervals set by the Manufacturer. You have to realize that there is no filter in the differential, and any metal particles will circulate in the gear oil affecting all the moving parts.
Another way to extend the life of the Differential components on these trucks is to Change the Differential oil after the initial break-in period for new trucks, which is between 3,000 and 5,000 miles.
About Us : www.howstuffinmycarworks.com
www.jlsporttrucks.com
Our Ebay listings : www.ebay.com/usr/jlst_fast
Cool Merchandise : howstuffinmycarworks-2.creato...
jlstfast.etsy.com
#Differentialnoise #RingandPinion #differentialgears #howstuffinmycarworks

[@ashleyhenson239]

Best video on RUclips about auto repairs hands down finally someone who knows what they are doing. Will be subscribing to this. Channel

[@SrColon309]

We already have the tool 🔧 for sale to adjust your Dodge differential, it's yours for only $100 dollars, shipping included. Just kidding, thank you very much, mega excellent video, the best on RUclips.

[@steveclujhawkins8063]

This 3 part series allowed me to rebuild my ruined carrier assembly. The adjusting tool..genius. $6 for fittings & i found a 40" length of threaded 1/2" pipe at work. My 1st rebuild. This Dodge differential lasted from Dealer to June 2016. 183K miles.

[@caguirre160488]

you saved me a lot of research, this is the first time Im doing it on my Dakota which uses same specs... I skipped 2 steps you did and went wrong, went back and did it as on the video and it was a complete success! Thanks for sharing your knowledge

[@daddybean]

Thanks so much for your excellent tutorial videos on rebuilding the 9.25" rear axle. this helped me tremendously! especially showing how to make the homemade tool for adjusting the preloads .

[@marrag1]

I’ve watch this video at least 20 times and took notes. Thank you for making this.

[@robr498]

Very well done series on how to repair the problem. I was impressed with the step by step process and found it easy to follow. Did mine the same way following the steps, even made the special tool to set the bearing load. Nice job. Only thing missing was how to manage the pinion while setting the 20inch-pound. I used a 3ft piece of angle and drilled a hole in it to wedge the knuckle while cranking on the lock nut.

[@stuarttooms2107]

Another impressed viewer. Excellent how to video.

[@johnbronson1275]

Excellent Job !! I wish every mechanic could be so careful about all this details you did so well. I would go to your shop any time. Thank you.

[@tii2015]

Absolutely a great series of videos!

[@spelunkerd]

Best video I've found so far here on youtube for a rear diff overhaul. Thanks.

[@arthooo]

Hi thanks for video just about to take diff out my liberty jeep and I was thinking that it had shims this is the only video I have seen that shows you the adjusters this has saves me time and hassle cheers

[@andrewstrong2134]

excellent video series guys helping me out by teaching me alot about how my vehicle works and helping me save on costly repairs

[@billhyslop117]

Best video ever. My inter prov was issued in 74 indicating I have seen a few vidios.

[@timpedraza2085]

Fantastic job, very precise and detailed oriented. Thank you!!

[@MikeRemvidas]

Great set of step by step vids ‼️ subscribed

[@DarrinKoone]

Thanks. I learned a lot. Loved the added info on checking backlash in at least two places to verify wear on the ring gear. Also on the Backlash wrench. Great Idea....

[@jessefrith690]

this is a very thorough and well made video. two thumbs up!

[@ManicPandaMedia]

Excellent tutorial!! Same common comment, Love that your kids are learning also!! Great helpers!

[@gedungisphoopnuchle9121]

Great series, and easy to understand. Keep it up!