Watching you guys drill the oil pan was more tense/suspenseful than any thriller movie haha! Great install guys, will definitely be rewatching this as I work on my Kraken install.
Glad I was able to help. I will post a follow up video soon on what I have learned since the install. For example, the stock fuel pump gave out and had to put in a better one. I will also post more tutorials soon. Let me know if there’s anything you have a question on.
Thank you. We made a straight pipe section of exhaust to swap out the muffler as needed. It’s a little loud without the muffler but good for the track.
Probably wouldn't be a bad idea to get an aluminum radiator next on the list... the original plastic ones suck and if you don't have a reroute, that turbo will probably get your engine warm pretty quick. Great video!
Already done. Since the video I added heat shielding around the down pipe and air filter, plus added an aluminum radiator. I will be posting a follow up video soon with the updates. Thanks for watching!
Is there anyway for the intercooler piping on the turbo to be out of the way? on the bottom side, can u just flip the turbo so it points down instead of up?
There are kits that clock the turbo down to have the pipe lower but I don’t think there’s any gain except the look. I chose Kraken because the manifold flows better, they have a 3” down pipe, an amazing 3” exhaust option, and better quality on the fab work. I have added heat shields and an aluminum radiator since this video was made. I’ll post a follow up video with what I have learned and the tweaks I have made since the install. Thanks for watching.
@@paezracingtexas8301 I think your build looks good, the only thing that i would want different is that one hose, just for the looks, so I was curious about that.
Yea, I thought about that too, but have been very happy with this kit. I did have to trim some inner hood support as that hose did rub a little. I may be adding some hood vents.
Megasquirt 2. In the beginning of the video I review all the prep work done prior to turbo. Please feel free to message me on Instagram for any detailed questions. nb.clay
What fuel pump do you recommend for this? I'm still planning out what parts im gonna use. Also for all the turbos that you can choose, do they all come with an 8 psi waste gate?
I really like the detchwerks pumps, I have a dw300 on my car which is a little over kill but they have smaller options. I believe most of them come with roughly an 8psi gate. Turbo smart sells one you can interchange the springs easily
Already done, plus heat shields around down pipe and air filter. I made a follow up video which is now posted on my new channel “The Miata Garage” thanks for watching!
Konig Countergrams 15 x8, Falken RT660 tires 205 50 15. Soon will be putting in some fender flares and bumping up to a 15x10 with same wheels and tires but a 255 40 15.
![CENTRAL CEE - GEN Z LUV [VERTICAL VIDEO]](http://i.ytimg.com/vi/VIbidJm9q34/mqdefault.jpg)
Killer install video man!
Thank you, it’s such a great kit!
Oh Papa came to say hi
Watching you guys drill the oil pan was more tense/suspenseful than any thriller movie haha!
Great install guys, will definitely be rewatching this as I work on my Kraken install.
I know right. And to top it the drill wasn’t working good.
Just got my top mount 2554r kit for my godly 1.6, pretty excited after watching this!
You’ll love it!
So good! Great install video, you showed all the tricky parts. And that exhaust is 🔥
Glad you liked it!
wasnt confident with an install till seeing this video, good work man
Glad I was able to help. I will post a follow up video soon on what I have learned since the install. For example, the stock fuel pump gave out and had to put in a better one. I will also post more tutorials soon. Let me know if there’s anything you have a question on.
Awesome install dude! The car sound dope!
Thank you. We made a straight pipe section of exhaust to swap out the muffler as needed. It’s a little loud without the muffler but good for the track.
Let’s run it!
good stuff. Kraken kit on sale right now... might have to pull the trigger!
Definitely worth it!
Probably wouldn't be a bad idea to get an aluminum radiator next on the list... the original plastic ones suck and if you don't have a reroute, that turbo will probably get your engine warm pretty quick. Great video!
Already done. Since the video I added heat shielding around the down pipe and air filter, plus added an aluminum radiator. I will be posting a follow up video soon with the updates. Thanks for watching!
@@paezracingtexas8301 Awesome - looking forward to it! Also one question - were the turbo drain plug, tap, and bits included in the kit?
Yes, the bit and tap came with the kit. For the money, the best kit out there! Make sure to get the 3” exhaust, it is awesome!!!!!
Great video. Did you have issues fitting the silicone coupler on the Skunk2 TB or just issues fitting the clamp that came with the kit?
Yes I had to heat it up and use wd40. That’s why the cut is a little wonky
Great Video bro, I just bought my own kit. Is there a way you can share your tuning maps? I would like to see/install your final tune!
Follow this channel for more videos on this Miata, coming back with a forged motor setup and will be showing more tunning!
Is there anyway for the intercooler piping on the turbo to be out of the way? on the bottom side, can u just flip the turbo so it points down instead of up?
There are kits that clock the turbo down to have the pipe lower but I don’t think there’s any gain except the look. I chose Kraken because the manifold flows better, they have a 3” down pipe, an amazing 3” exhaust option, and better quality on the fab work. I have added heat shields and an aluminum radiator since this video was made. I’ll post a follow up video with what I have learned and the tweaks I have made since the install. Thanks for watching.
@@paezracingtexas8301 I think your build looks good, the only thing that i would want different is that one hose, just for the looks, so I was curious about that.
Yea, I thought about that too, but have been very happy with this kit. I did have to trim some inner hood support as that hose did rub a little. I may be adding some hood vents.
Did you buy your kit with ac hot side piping? And what size intercooler did you get, 5 or 7? Thanks!
Yes, came with the pipes. 7” intercooler.
@@paezracingtexas8301awesome thanks! And did your car run fine on the stock ms3 map? Did you have to get it professionally dynoed?
👏👏👏👏
Thank you
Did the kit come with an ECU? If not, what are you running?
Megasquirt 2. In the beginning of the video I review all the prep work done prior to turbo. Please feel free to message me on Instagram for any detailed questions. nb.clay
Check out the follow up video on “The Miata Garage”
What fuel pump do you recommend for this? I'm still planning out what parts im gonna use.
Also for all the turbos that you can choose, do they all come with an 8 psi waste gate?
I really like the detchwerks pumps, I have a dw300 on my car which is a little over kill but they have smaller options. I believe most of them come with roughly an 8psi gate. Turbo smart sells one you can interchange the springs easily
@@TheMiataGarage appreciate!
youre gonna need to upgrade that radiator if you havent already to make sure the car stays cool with the turbo
Already done, plus heat shields around down pipe and air filter. I made a follow up video which is now posted on my new channel “The Miata Garage” thanks for watching!
@@paezracingtexas8301 was the heat shield on the down pipe for the brake res? if not you need one
what are the settings of that ignition cut at redline ?
Just spark cut, 7250, 200rpm timing pull
@@TheMiataGarage i am from romania and we use here ME221 and it has ignition cut and ignition mod but not sure how much ignition mod to add -5,-10
Hi, Do you have a link to the turbo kit? Thanks
kraken-mx5.eu/shop/gt25-builder-top-mount-builder/
whats the RAM filter brand?
ProRam
Time To Upgrade the Drill Homie
Yea, it’s due.
how long was shipping?
It took about 2 months from the time we ordered, but I think he was waiting on parts before shipping. The time in transit was probably about 2 weeks.
hey man what are the wheel and tire specs?
Konig Countergrams 15 x8, Falken RT660 tires 205 50 15. Soon will be putting in some fender flares and bumping up to a 15x10 with same wheels and tires but a 255 40 15.
@@paezracingtexas8301 Im thinking about getting these wheels as well in 15x8 or 9. did you roll fenders at all? cant wait to see the 15x10 setup gl!
Did have to roll fenders a bit because I run the car pretty low.
What kit is this exactly?
Top mount 2560r
@@TheMiataGarage thank you
wow wow buddy dont flex with your 7 inches i just got 3 over here
Haha