Get the 3000. I made the mistake of getting stylo and very disappointed. Thanks for the video wish it was done 3 months ago. I guess better late then never and hope someone does not make a mistake like I did.
Just wanted to stop by and thank you. I followed you about 8 months ago when I started making flags after watching your how to videos. Happy to say I sold enough and purchased a CNC machine. (So much better instead of hand carving lol). Now I made my money back from my CNC 10x over. Keep posting great content!
That is so awesome to hear man and that makes me so happy to hear that my videos are of some help! Thank you so much for taking the time to share that with me i really appreciate it. Keep grindin it out man! 👊🏼 haha the cnc would definitely be a nice tool to have around! My hand gets so cramped up so easily i could definitely see the benefits of that! Again, thank you and God Bless🙏🏼🇺🇸
Nice review! I've seen this method and the chisel method for carving the stars. I opted for using a chip carving knife and carving the stars by hand. I'll be finishing my first flag this week. Thanks for the great videos!
After starting some carving, I started thinking of ways to make a foot petal controlled air plowing attachment for my compressor to keep the dust away from my carving. Then I saw your dust blower attachment which I didn't know existed. Best $4 spent, thanks! Ordered pistons for my own flag cabinet as well. Keep up the good work. Subscribed.
Heck yea no problem that little dust blower makes a huge difference in keeping the carving space clear 👍🏼 thats awesome man i hope the concealment build goes well! Im gonna do my best, thank you so much for the support I really appreciate it 🙏🏼
@@MaxF01 Ok, lesson learned: don't listen to a Lowes employee. I should have known better but was advised against MDF. Used plywood instead and the different textures in the wood caused the paint to bleed under the tape. Overall for a first try, I'm happy about it. I'll do the next in MDF. Its not something I would hang in my living room but for my garage or barn it will fit right in. Question: How do you finish your edges? Wrap the design around the sides or do a solid color on all 4 sides? Thanks again for the inspiration.
Just becareful I went and bought that as well and I had to take it back to lowes because the motor blew in my hand I only use it for the sanding tips to clean out my stars
Cool little light weight easy to use tool, I really like the Dremel line. I bought my 1st Dremel tool when I started making your flags, now I may have to buy this one. Lol 😂 Thanks Max’s
I have the 3000 and was considering getting the attachment. I just bought the stylo+ thinking it was the adapter because it’s been a while since the last time I’ve viewed it. I was looking for a review video and a comparison with the adapter. Your video is the second review I clicked on and it was what I was seeking. I don’t plan on using often so the light weight, reduced price and small cable seems like it will work for my needs so I plan on keeping it. Thanks for the information and review.
Kinda off topic but figured I'd ask on a newer video. I've tried with a flex shaft, stylo and cutting attachment so like a router but for the life of me cannot make clean stars with straight lines. Any advice or tips?
I think the best advice i can give about how i do mine is i am always moving the position of my hand so that all i have to do is sorta pivot it back and forth, you can kinda see it in the video, and then i also make sure i do it kinda fast. If i tried to do it slow i think it would be a lot harder to control it when its going through the harder spots and softer spots but going over it lightly and fast back and forth i think that helps to keep it straight. And then most of the time I’ll continue the lines all the way across each star and that will help a little to get it straight. Im sorry i dont have anything better and i really hope this helps at least a little! Let me know if you have any further questions and good luck!
New sub. Great video and nice flag. I make em too. What color white stain did u go with? I usually leave my white stripes unstained and just burnt. But I like yours
Thank you! Its just varathane water based tinted in white 👍🏼 i think i like the white just a touch more than the unstained but the unstained definitely have their own awesome look
Get the 3000. I made the mistake of getting stylo and very disappointed. Thanks for the video wish it was done 3 months ago. I guess better late then never and hope someone does not make a mistake like I did.
Thank you for the heads up man I appreciate it!
I know I am kinda randomly asking but does anyone know of a good site to watch newly released movies online?
@Kaison Dante Thanks, signed up and it seems to work :) I appreciate it!!
@Alejandro Oliver happy to help :D
Can you explain why you were disappointed? Would you recommend for casual use?
Just wanted to stop by and thank you. I followed you about 8 months ago when I started making flags after watching your how to videos. Happy to say I sold enough and purchased a CNC machine. (So much better instead of hand carving lol). Now I made my money back from my CNC 10x over. Keep posting great content!
That is so awesome to hear man and that makes me so happy to hear that my videos are of some help! Thank you so much for taking the time to share that with me i really appreciate it. Keep grindin it out man! 👊🏼 haha the cnc would definitely be a nice tool to have around! My hand gets so cramped up so easily i could definitely see the benefits of that! Again, thank you and God Bless🙏🏼🇺🇸
CNC is good from a business perspective but hand carving is where the skill and enjoyment/fulfillment is at.
I have recently
bought this model for glass engraving ... I like it and love the fact there is has a chuck that goes with it.
Nice review! I've seen this method and the chisel method for carving the stars. I opted for using a chip carving knife and carving the stars by hand. I'll be finishing my first flag this week. Thanks for the great videos!
After starting some carving, I started thinking of ways to make a foot petal controlled air plowing attachment for my compressor to keep the dust away from my carving. Then I saw your dust blower attachment which I didn't know existed. Best $4 spent, thanks! Ordered pistons for my own flag cabinet as well. Keep up the good work. Subscribed.
Heck yea no problem that little dust blower makes a huge difference in keeping the carving space clear 👍🏼 thats awesome man i hope the concealment build goes well! Im gonna do my best, thank you so much for the support I really appreciate it 🙏🏼
@@MaxF01 Ok, lesson learned: don't listen to a Lowes employee. I should have known better but was advised against MDF. Used plywood instead and the different textures in the wood caused the paint to bleed under the tape. Overall for a first try, I'm happy about it. I'll do the next in MDF. Its not something I would hang in my living room but for my garage or barn it will fit right in. Question: How do you finish your edges? Wrap the design around the sides or do a solid color on all 4 sides? Thanks again for the inspiration.
@@zanebanks1530 MDF is harmful to breath so make sure to wear a dust mask or respirator.
@@MaxF01 what air blower attachment do you use? Is there a video you have for it?
Thanks for the review I just bought the stylo plus I'm building my flag very soon
No problem! Thats awesome to hear i hope it goes well 👍🏼
Great test. Thank you very much helped with the choice.
Just becareful I went and bought that as well and I had to take it back to lowes because the motor blew in my hand I only use it for the sanding tips to clean out my stars
Thank you for sharing man you will probably save many other people the trouble! 🙏🏼
Cool little light weight easy to use tool, I really like the Dremel line. I bought my 1st Dremel tool when I started making your flags, now I may have to buy this one. Lol 😂 Thanks Max’s
Heck yea so far i havent had any issues with any of my dremel tools! No problem! 👍🏼😎
All this knowledge for free. You should be getting more views. Keep posting brother
Thanks for the review!
Happy to share!
I have the 3000 and was considering getting the attachment. I just bought the stylo+ thinking it was the adapter because it’s been a while since the last time I’ve viewed it.
I was looking for a review video and a comparison with the adapter. Your video is the second review I clicked on and it was what I was seeking.
I don’t plan on using often so the light weight, reduced price and small cable seems like it will work for my needs so I plan on keeping it.
Thanks for the information and review.
Kinda off topic but figured I'd ask on a newer video. I've tried with a flex shaft, stylo and cutting attachment so like a router but for the life of me cannot make clean stars with straight lines. Any advice or tips?
I think the best advice i can give about how i do mine is i am always moving the position of my hand so that all i have to do is sorta pivot it back and forth, you can kinda see it in the video, and then i also make sure i do it kinda fast. If i tried to do it slow i think it would be a lot harder to control it when its going through the harder spots and softer spots but going over it lightly and fast back and forth i think that helps to keep it straight. And then most of the time I’ll continue the lines all the way across each star and that will help a little to get it straight. Im sorry i dont have anything better and i really hope this helps at least a little! Let me know if you have any further questions and good luck!
Cool review and project.
Can the flexshaft be used with the dremel 100?
New sub. Great video and nice flag. I make em too. What color white stain did u go with? I usually leave my white stripes unstained and just burnt. But I like yours
Thank you! Its just varathane water based tinted in white 👍🏼 i think i like the white just a touch more than the unstained but the unstained definitely have their own awesome look
can this be used on metals like stainless steel, aluminum blanks?
GREAT REVIEW 💥 💥 💥 💥 💥
Thank you!! 🙏🏼
Do u think this would work for engraving jewelry?
Great video
The Dremel 3000 batters doesn’t last more than 1 hr, electric cord is a win...
Thats good to know, thank you!
Would this be able to engrave my name on all of my hand tools?
I think it would, they also have metal engraving bits
Awesome
Thank you!
Will the dust blower fit the stylo+?
Yes. It works great!
Yes. It works great!
Mans doesn’t understand that he’s developing carpal tunnel syndrome 😂😂😂