REBUILDING OUR WRECKED VW SCIROCCO | VW Scirocco Pt. 2
HTML-код
- Опубликовано: 22 ноя 2023
- Before buying any used car, it's important to check its history. Use the link below for a 10% discount or Discount Code TR : www.carvertical.com/gb/landin...
Welcome to Transformotion Vehicle Rebuilds! Follow us as we rebuild some absolutely destroyed cars!
In this week's video we tackle the structural issues on our wrecked Volkswagen Scirocco...
We would be grateful if you could give the video a thumbs up and don't forget to subscribe if you're new to the channel.
Follow Us:
Instagram - / transformotionvr
Thanks for watching.
#highpeakautos #Transformotion #TransformotionVehicleRebuilds #VW #Volkswagen #VolkswagenScirocco #Scirocco #ScirrocoR #CopartRebuild #Copart #VehicleRebuilds
I really enjoy watching these videos.
You are all very skilful, transforming these cars from what look like writes offs, to showroom condition.
Well done guys, keep the videos coming please ❤.
Nice one mate, we really appreciate these comments! Thanks for the support 🫶😉
Whoever the marketing people are at car vertical, we need to thank them because it feels like they’re funding half the car channels on RUclips!
Ha ha they are a massive sponsor to us youtube channel's! They're a massive help! 😁
All that bending, hammering and welding shows the enormous amount of energy that has gone into the car during the moment of impact.
Yeah its quite surprising how tuff this thin metal is!!
Beautiful piece of welding and fabrication. The shut lines look perfect.
Thank you mate, that means a lot! Thanks for the support 🙏
Great work lads and I am really loving the banter. Have you thought about a wheeler dealers type format starring Matt ? Cause with your chemistry, I really think you'd smash it out the park...
Thanks mate 👍 it'd be fun that like ha ha
Hi Guys. Just goes to show. What you can do with so few tools (not including a welder). See you both in the next one. Cheers. 👍👍
Thanks mate, yeah somtimes you don't need all the fandoogley tools ha ha we appreciate your support 👍
As an X Panelbeater from many moons ago i think it might be beneficial to pick up a few Panelbeating Dollies to straighten shape and knock out a few bumps and dents, enjoying the videos as it brings back memories for me, best of luck.😊
100% mate, we'll improve tools as we're going as most of my stuff is for more mechanical stuff, but we do need a good panel beating set and porter power
Fellas, tis a pleasure to watch artists at work. Keep up the great work. Hope he realises how good ye are😊
Thnak you mate we appreciate that, thanks for the support 👍
Another very entertaining vid. Well done lads!
Thank you very much, we appreciate your support 😉
You chaps lol are cool I love it when you know what you’re doing and get on with it 👍🇬🇧😅
Thanks mate! We really appreciate that! 🙏
You made a damn close guess with the inner wing. And the end product is impressive. You have an amazing amount of patience too. Looking forward to the next video. PS Still love the colour
We measured about 10 times ha ha it wasn't a guess 😅 thanks mate she is a lovely colour
@@TransformotionVR fair enough. You both have an eye for the detail, and that's why your transformotions are superb
Thanks mate that means a lot 👍
Partial to a nice Scirocco.. Can't wait to see this one gradually come together 👍🏻
Shes grown on me personally, I really like it now, shes gonna look good mate!
Looking good lads, top job
Nice one mate, we appreciate that 👍
Teamwork makes the dream work,nice work gents
Nice one mate, it definitely does! 👍
Great job guys! Can't wait to watch the next video! 👍
Nice one mate! Thanks for the support
Its like watching an episode of the "restoration man and shed and buried" great to see you lads enjoying what you do and making it great to watch, keep up the quality videos 😊😊😊
Thank you mate, that means a lot! Thanks for your support
Great job with a few basic tools. Good to see Andy cares more about his hair when welding than his arms and hands 😅. Keep em coming fellas 👌
Ha ha 😂 my gf actually said to me when she seen the vid, "shouldn't you have gloves on there?" ha ha I need to up my safety game 🤣
Cracking tunes this episode guys! Keep up the good work - looking forward to the next video 🖖
Nice one mate, thank the editors for that, ha ha I liked them too 👍
Im loving these videos lads!!! Keep em coming 👍🏻
Ha ha thank you mate, we really appreciate that 👍 catch you next week 😉
Like your style lads and it's interesting watching you working
Nice one, we appreciate that 👍
Great job you did there lads and the moral of this video is? If you have a massive adjustable spanner, a hammer , a grinder and a flat head screwdriver you can do anything. (well almost anything) 😁
Ha ha is right mate! Definitely! You don't need all the fancy tools somtimes 🤙👌
Nice one lads, keep them coming. Looking forward to the cosmetic work with the Range Rover.
Thanks mate! We appreciate that 👍 I'm not looking forward the underside of that rangey! 🤮 ha ha
@@TransformotionVR oh and don't blow the budget. Matt is always under with these things haha
Ha ha 😂
Nice job lads, spot on 👍
Thank you mate, we appreciate that 😉
Awesome work, guys... 👏
Thank you very much mate 👍
Much love from South Africa
Thank you! Lekker boet! 😉
Whats them work pants lads also tidy bit of metal work there by the way , looking forward to seeing the next one
Thank you mate, we appreciate that, the work pants are called revolution race, there not cheap but seem to be holing up to a good testing haha
Nice work,panel gap looks good too compared with the near side great progress it’s starting to come along well 👍
Nice one mate we appreciate that! These positive comments mean a lot
@@TransformotionVR 👍looking forward to the next one
Thanks mate, that should be out on Thursday 😉
@@TransformotionVR 👍nice one 😎
👍
Great video lads, little tip always cover the screen when welding,or grinding, looks straight now.
Thank you mate and thanks for the tip, that screen needs replacing tho 😉
@@TransformotionVR ah I see didn't know that,I've made the mistake in the past ,cost me dear,your doing well lads,keep it up
Thanks mate, if you ever seen anything like that that we could improve on just let us know, we did know about that one but we might have not known, thanks for good intention 😀
Hahaha I fall within the 1.4% audience of South Africans watching the show and I loved that…
Glad you liked it 🤣🤌
Quality repair 👌👌👌 good crack throughout
Thanks again mate! Are you still working down these ways on the wind turbines?? 🤙
@@TransformotionVR good memory you have, I’ve finished all inspections on burbo bank be back early next year
Ha ha its the name, from the toon, and you comment on most of our videos so you get familiar with a few of the names, thanks for the support mate we really appreciate it 👍
@@TransformotionVR thanks for the videos mate, I’m a car junkie and it’s like another fix 😂😂😂
Ha ha im glad we're supporting your habit 🤣 at least you can't OD on these ha ha
Guys y didn't u just take the other wing off & use it as a template. Loved that little bazz frestyling bit.
We did measure the bolt holes from the other side and used the new second hand wing as a guide, yeah theyre not bad these editors are they! 😉
All the way from South africa 🇿🇦 lol n boer maak n plan and so uce did😂❤
Ha ha 😂 thanks for watchin mate
Great Video Fella's. Can you tell me the Make & Model of the face mask/shield you use when grinding in this video Please ?
Hello mate, it doesn't say on ours but I've googled it and they're safety goggles with detachable face shield by sealey, they're on a website called zoro.co.uk order code ZT1231069P. Im sure you can get them cheaper than this tho 👍
Thanks For the information Fella’s I Really Appreciate Your Help…. Looking Forward To The Next Episode 👍👍
Yeah no worrys mate, thanks 👍
👍🏻👌🏻
😉
Dodgey these scouse accents! Is there a bit of Widnes in there?
We've never said we're from liverpool 😉
Good to watch guys but have you never heard of gloves or safety glasses 😮 makes it very exciting though😅
Thank you mate! Ha ha I had my squints on and camouflage gloves! 😆
13:26 Don’t you need gloves and long sleeves to protect yourselves against UV?
(I’m just curious, I’ve no experience welding whatsoever.)
Yeah! Funnily enough my girlfriend just said the same to me when she watched it ha ha my bad!! 😬
should re name this channel .. Chop Shop 😂
Ha ha 😂
A little bit of fettling and away we go? Still not sure about that Range Rover though.
Ha ha neither am I ha ha 😂 😆
5:14 Haha, As a Dutchman, I don’t need a translation for that either. 😁
Did he get it right?? Ha ha you should have heard the first few attempts ha ha 😂
@@TransformotionVR
It was spot on! 👌
Thanks mate 👍
As a South African, loved it! 😂
@@rowanherring1173
Goedemorgen!
Get a car shark to source another one, and just ring it
🤣🤣🤣 ha ha it wouldn't male the best youtube video th👍
Need to get yourselves a dozer for pulling
Yeah we've looked into them, the only issue is having a small unit and storing it, but they look like exactly what we need
Why are you talking lime that then? Haha
Our parents and family are all from liverpool
At this rate you should get twenty episodes out of this. 👍👍 i hope you got day jobs.
Yeah we still have to work to pay the bills mate
@@TransformotionVR well good luck man. Good instructional videos to show the people..maybe give people insperation.. I'm older than you. But years ago there was many crabs going down the road. Or two half's welded together. Tools advanced now from my Apprentership ..40 years ago.. the car market about to crash. Watch out.ill stick around. 👍🍺
Yeah the odd cut and shut was around when I was growing up, the car games already on its knees at the minute, all local trades are telling us, we'll see what happens
@@TransformotionVR well good luck. Keep going.. Winter here. Should get veiwers..the age of information. Have a good weekend..Adios. Lekka Boet Lekka.
Nice one, lekka boet lekka 🤙
Use welding gloves guys you’ll thank me in years to come
I know mate, Im just a bit lazy in this video, I do have some too
Please not so much background music and editing
A lot of people love it tbh, we leave that side of things to the editors
@TransformotionVR It's too much and unnatural in my opinion. It makes it seem more like highlight video than actually being in the workshop with the mechanics. So as a non-mechanic it is more difficult to follow what is going on.
Sorry guys! not knocking you for having a go at this, But seriously you have no idea how you have just altered the structural intergrety of that vehicle in the way you have welded the flitch and inner, overlaping joints, cutting and shunting. If that vehicle is involved in another o/side front corner impact it is going to fold like a tin can.
If you pay for the car I'll personally crash test it for you and we'll take a look 😉 ha ha
@@TransformotionVR Like I said not knocking you for trying, Don't need to see you crash test the car as 35 years in the uk crash repair industry already tells me how it will perform in a impact.
@@stevet4475why not provide some insight then? Anyone can call something shit
@@JayGee6996 Did I call it shit? No i don't think I did, in fact I said I am not knocking them for trying.RUclips wouldnt give me enough words in the comments to give insight how to do it correctly, plus do they have the budget in the vehicle to purchase a OEM flitch and inner, along with a 10k spot welder, no they probarly don't. So stop been a hero and sit back down.
@@stevet4475 more words and no substance.. and you said it would fold like a tin can; which is by anyone’s standards calling it shit/dangerous/not worthy
Looks like mash potato
Ha ha to be honest ive had straighter mash potatoes 🤣🤣
Oh guys your dialect…😖
Whats up with it?? Ha ha where are you from?
Tidy, was the end of the vid end of day 3 ?
Nice one, I think it was 2 and a bit days working on the car and the rest if the day picking up parts from oxford