The entire selection of Milwaukee M18 Batteries EXPLAINED! Coptool Power Tool Showcase
HTML-код
- Опубликовано: 15 июл 2024
- In this week's Coptool Power Tool Showcase, we take a long look at the entire line of Milwaukee M18 Batteries, including their new High Output models.
We also look at the NEW Milwaukee Super Charger, and give you a chance to win our exclusive 1 of 12 Milwaukee Packout Battery Upgrade Kit!
Shop & Specs - www.ohiopowertool.com/m-2035-... 
Наука
![NoCap - Yacht Party [Official Music Video]](http://i.ytimg.com/vi/rm_lvDln8kE/mqdefault.jpg)
I would be able to use those three high output batteries at my job site to power all my milwaukee tools and then get home to tackle my yard work. To power my milwaukee trimmer and blower that I just got. I’m an apprentice plumber and all my power tools are milwaukee so these three batteries would be put to good use everyday. Thank you guys for the opportunity and keep up the hard work
Congratulations Eric! Please email us at Info@Coptool dot com so we can get you "Rob's" Packout!
Congratulations and kudos, the trades don’t get the respect they should. Good luck on your journey, sounds like you’re killing it.
Coptool THANK YOU ROB for the packout!!!
The blower consumes energy like crazy on the rabbit setting (vs the turtle setting) My 5.0 battery consumed 50% of power after only 5 minutes of use
lucky bastard 😢
Finally, I finally understand the myriad of batteries. Or the battery of batteries they offer. Thankyou for explaining the difference b/w HD and HO.
Awesome Video!!! I was just asking my Tool Truck Guy this week these same questions about these batteries but you explained it perfectly. As an Operator Engineer I would use these every day at work with all my M18 tools!!
I am a master carpenter with forty-five years experience in all phases of construction from concrete foundation footings to high end elite radial staircases,right now I have taken on a job that requires the installation of several red-headed bolts into monolithic poured concrete walls,and several more into several concrete tip-up wall construction,that prise would be just what the doctor ordered for what I have to do,thank you very much for considering me for this wonderful gift !
I'm a lineman, and i work on energized powerlines day in and day out. I typically work with everything from 120 volts up to 14,400 volts, and when handling energized wire up in the air, you can't exactly stop to change a dead battery or anything like that because you're essentially 1-handed, at best, until the wire is moved and secured in it's new location. I trust my Milwaukee tools every day and they have performed well thus far. I've got: 1/2" standard drill, 12/2" Hammer drill, 1/4" impact, 1/2" Medium impact (its actually a lineman-specialized version with a 7/16" quick connect for our pole augers drill bits), a flood light, a spot light, and the large bluetooth jobsite speaker. As you can imagine, only having 2 batteries and 1 original charger (due to my other batteries and a rapid charger being stolen from my truck on a jobsite) has been a big hassle and they are only the 3.0 MaH batteries, at that, so not much juice for my bigger tools. Always having to wait for batteries to charge again to finish a task. I would honestly appreciate it if I were chosen to win, and I would certainly welcome any new batteries and a charger more than you would ever believe!!! Ig would help me out tremendously! Probably just a pipe dream, but I'm keeping my fingers crossed!!🤞🤞👌 thanks guys!
Love that they now have 21700 cells in the HO batteries. Perfect for the larger FUEL grinder working on trailer repair.
Thank you for the information, I’ve had Milwaukee tools for about 4 years now and love them. I’m a superintendant for a commercial GC. We do a lot of TI build outs and pick up work where a recept is usually 200’ away and we need to pick up a generator to start/complete the job, the High Output batteries would definitely come in handy for for any item that needs to be tackled.
Hey Guys!
I'm the new owner of a Milwaukee Brushless Cordless Circular Saw ( 2631) tool only. Next month, I've a roofing job coming for my stepmom. Sadly, the previous guys did a poor job and some wood would need to get replaced.
The cordless option of my saw is perfect and I need power! The M18 Upgrade kit would be awesome to have.
Cheers,
Im a reborn again hubby woodworker now that my 3 little boys are older and I’m teaching them the fun of woodworking. Together, the boys are ecstatic to be old enough to work with dad together and we are building an outdoor deck this spring and summer in preparation for our pool. I’m a huge Milwaukee and this would be icing on the cake to share that excitement with my boys and get them jazzed about Milwaukee too.
Love the small, medium, large, equally compatible batteries. Each would get lots of use in my M18 OPE, impacts, saws, and lights. Great to be able to choose a battery based on weight and runtime needed for the task.
Wow...this is exactly the info I was looking for. Great video!! I'm looking to rebuild my shop that burned down last Thursday night; and replace all the tools I lost. Complete Loss. Been collecting tools since I was a teenager. Went from being the go to guy for tools to not even being able to change my own oil... But! It wasn't my house and nobody ( or dog) got hurt. They make new "stuff" everyday so now I have some shopping to do. I'm a Milwaukee guy and was doing a little research on what was available out there.. found your video! Big help. Thanks
First thing I would use those batteries for is rebuilding my shop! Bigger and better.
PS I think my dog is taking the loss harder than I am (he is my shop buddy)!!
Really great video. I just bought the 'lunchbox' for my M18 table saw. What a difference in output vs. the 6.0 batteries I had on hand already.
A bit about charging that wasn't mentioned: 1) Fast-charging ANY Lithium battery shortens its life, so if you have the time, slow charge them. 2) EVERY charging cycle counts towards the warranted 1000 charging cycles. If you charge from 0 bars, or 3 bars, they both count as a charging cycle. So, if you want to use your warranty for as long as possible, run those batteries down before charging them.
My young family has been doing a lot of work in the last year. We have been building a home and we are doing as much as we can as a family to learn and save money. When the house is done I plan to get back to my automotive hobby, and my wife and I are also talking seriously about starting a custom furniture and home decor business! Sanders, yard trimmers, chainsaws, planers, saws, lights and many more tools will be in our future! From home construction and DIY projects, upcoming landscaping projects, automotive work, and starting a new business for and WITH my young family, we need as many batteries as we can get too!
Amazing review, I actually learned a lot. I would love this kit for my 1/2" impact to work on the oil rigs so I don't have to run so many air hoses and a big compressor.
for all my yard work tools (trimmer, blower and chainsaw) and for my favorite tool for the last 4years my M18 1-1/8 SDS hammer drill....
Hey there, my names wade and this is my entry for the pack out. First of all, that looks so cool! Im a ticketed carpenter with a framing crew and have just started into the milwaukee fuel line. Currently the biggest battery i have are the 5.0 xc, I could use the bigger batteries in that pack to make our saws run longer. on the weekend i was sheeting a roof with an apprentice and the battery died, had to wait for him to run down all the floors out to the truck , swap batteries, get back up stairs, climb int o the trusses to throw me up a battery. I would love that pack out!!! thanks so much for the video anyways, i feel like i now know more about these batteries. subscribed : )
I am a new electrical apprentice in Louisiana and have recently purchased a few Milwaukee tools for the job and home. Sadly i only have 1 charger and at times having to use that 1 slot for multiple tools. This would be such a nice upgrade for what i am doing now and plan to do! Thank you for the opportunity.
Need this One Packout to Rule Them All to power through demolishing my old front walkway... and nice explanation and 2nd camera angle, folks! Good to see some past video of Scott in background too. (Oh, and now we know how you powered the Milwaukee to open the Bulldog earlier...!)
I’ve always wanted to build a large shed/workspace in the back garden, imagine how much easier it would be with batteries like that!
Y’all just made my life so much easier explaining these batteries to customers! My M18 miter and circular saws would love the extra juice for all the furniture I’m building for my new place!
This is unbelievably helpful
We're currently starting the task of building our stairs from the top of a rocky 30ft cliff down to a beach cove for access. The faster we can get off drilling into the rocky face and fastening down supports the better and safer!
Im an auto mechanic and I use Milwaukee 1/2 impact gun every day, along with the grinder and fan too. Have those batteries and charger would be amazing.
I will be rebuilding my 1996 Mystic Mustang Cobra with my 1yr and 3yr daughters. I had always wanted to do a project like this with my dad, but never got the chance. I've been saving money for 3 years doing odd jobs and finally have enough to start. These batteries would help with my 1/2" high torque impact and many of the other Milwaukee tools that I've been accumulating in preparation for this project. Love the channel, keep up the good work.
I build John Deere skid steers in Dubuque, Iowa and use nothing but Milwaukee power tools, radios and lights. This M18 HO/Super Charger would be a nice 'upgrade' to my tired and aging batteries!
Hey guys! The response has been so good that we've decided to wait until next Thursday, August 15th to choose our winner. So be sure to tell us in the comments about the job you'd tackle with this amazing limited edition packout!
I am a commercial electrician.
12.0 = Heavy Drill through Concrete using my Fuel M18 SDS Hammer Drill.
8.0 = Drilling, and cutting a lot of metal/steel using my 1/2" Fuel M18 Drill & Sawzall.
3.0 = Tightening a lot of bolt & screws with my Fuel M18 impact.
Can you let me know if I entered? Thank you guys so much for the video, and for the chance to win.
Did I mention that I have a rusty firebird? Did I also mention that I got allot of sanding??? Well let me tell you about this wonderful car. I picked it up off a trade, and it's done me wonders since. Buttttttttt! There is one glaring problem. The paint looks like a 5 year old was in charge of clear coat. Randly accross the car the paint/clearcoat is chipping and fading bad. Soooooo, if I get these wonderful Milwaukee power cells. I plan to spend the next few days, heck, maby even a week, sanding this bad boy down. Then it's off to the paint shop, or rattle can, depending on how my wallet is feeling that day. :) either way, yall have solid content! Keep up the good work!
Very informative video, I work on a farm and I’ve managed to switch all our power tools to Milwaukee, leaf blower for cleaning out grain trailers, cordless die grinder for reaming out bearing holes, 1/2” 3/4” and soon 1” impacts for maintenance small and large angle grinders for almost anything, vacuum for detailing equipment and chainsaw (just because I had to have it) as well as 4 different lights, super awesome brand and Great selection! Wouldn’t know what to do without them all! Oh and of course a cordless grease gun! Cuts time down tremendously during harvest!
As a framer I’m trying to move towards a cordless jobsite, and the Milwaukee HO batteries are exactly what I need to accomplish that. 12.0 works great for circular saws, table saws and can easily get us through a work day. This kit would be a great addition for our crew on our latest project! Thanks for the content!
I'm a diesel tech, run red tools all day!!! Would love the HO set might have to invest in the 3/4" impact
The kit would definitely help me at work! As we use a lot of our power tools in the electrical industry please consider 🤞
Thank you for going in depth about this. I am just starting my construction career and plan to go all cordless. It's good to know what products to get and how they work!.I've been watching you guys (and girls) from the start. Keep up the good work!
I really enjoy the M18 battery line up. I used every different battery everyday at work. My favorites right now are the HO 3.0 because they're small and powerful. I would love to win that supercharger and extra batteries, you can never have too many batteries!
Great review, those batteries would surely make my concrete carpentry be alot more mobile, compared to dragging a long cord around the job sites
Great information. I would use the highoutputs to Finnish making my house into a home for my girlfriend and I. Kinda slipped out I was going to propose as soon as I finished 😅 wish me luck!
Those new batteries will be used with love making my old deck safe for my 3 year old to play on plus bonus tree house with old deck material! Simple and easy to understand great vid!
Milwaukee tools may have been a little behind getting to the party. But man what an awesome cordless tool manufacturer! I now use them almost exclusively. If there was a cordless tool out there, it has been on my job trailer. Slowly I'm converting to all Milwaukee tools. The Packout, ridiculous! Used mine since Christmas everyday. Awesome
Finish cutting all the flooring and trim in my house that me and my wife built with the help from my m18 miter saw.
You guys are great. Great production quality and lots of information. I could use those batteries to back up the ones I have for my take saw and miter saw. I'm a remodeler who does the full range of carpentry tasks as well as plumbing and electric. Milwaukee is far and away my favorite brand of tools.
Use of the three battery set would be useful in testing the third iteration of a prototype tool this summer. It would also facilitate the purchase of two tools of which Milwaukee is my preference but the absence of Milwaukee batteries being an obstacle.
Wow, great video. I never really understood what battery cells were or how they worked on the different range of batteries until i watched this video. Thank you very much.
I just recently purchased Milwaukee power tools. I’m a convert coming from yellow & black because of the simplicity of M18 line overall. But you guys’ show keeps on educating me and a lot of your subscribers for sure! Since I already have XPs that came with the tools that I have, now I have to complement them with high output/high demand batteries for some applications. More power to your show and hopefully I get lucky to be pick as one of the recipients of your wonderful giveaways!
I like how instead of explain to us, the viewer, you explained to an unnecessary extra person who just said OK, uh huh, OK, throughout the entire video. Awesome!
I Would use the 3.0 for electrical rough in the 8.0 for my drill chugger and the 12.0 for my chainsaw!
I have only Milwaukee 18 volt tools that I use everyday around n my home I am a retired plumber/ pipe fitter and used a lot if different cordless tools in my life and I keep coming back to Milwaukee tools for my own cordless tools. I recently built a deck and used nothing but my cordless tools from Milwaukee tool. I would buy nothing else and I also have a drill and a 3/8 impact that i bought in 2005 and they are 14.4 volt and still use them very often. Excellent tool line and would recommend them to anyone who asked me about them.
I'm a commercial electrician, we're currently doing a project on a skyscraper in Atlanta 700 feet in the air. We need to minimize our returns for batteries as much as possible. I could certainly see this being a great asset.
You guys dropped a lot of knowledge on this video, thank you for that. This would be an awesome addition to my collection and would definently help out with my home renovation project.
First off thank you so much Ohio power tools for being one of the great sponsors the show🤣😂😃😄😅😁 thank you Sarah for being a great hostess for the show bus your sidekick😃🤣😄😆 and you too mr. Smith patch can you make a joke for you😃🤣😀😅 what you guys do keep up the great work my project is a big trellis are my wife's vegetables grow over that's my project you guys have a wonderful day can't wait to see you tomorrow on Friday keep up the great show and cheers will a beer
Would be a great addition for my Milwaukee hedge trimmer, blower, and string trimmer. Thanks for the opportunity.
Milwaukee has always been my go to tools, i can sure use this packout for my M18 Fuel Hacksaw to cut conduit all day long!
WOW. I’ve been looking to upgrade to the new Milwaukee high output units to complete my toolbox and extend my power and run time working at the shop. Awesome tools Excellent video
This would be a great addition to helping me move people, one elevator at a time. Great content guys.
Still like know price ranges on these great Batteries.Be great for fence repairs Irrigation sprinklers Water Controller clocks mounted outdoors or Garage inside walls mounting.
This guy can talk me into approving him nailing my wife
Thanks Guys, for the clear explanation, I finally fully understand the different types of Milwaukee batteries and chargers. I use many of the M18 tools in my Network installation business and my home projects, but my favorite is the new 1/2 in impact for removing lug nuts.
Just made the switch to Milwaukee and couldn't be happier! This packout would be the dream addition to work shop where all the heavy equipment and farm implements come in to be fixed. That supercharger would turn batteries around faster when we have to pull apart the rear differential on the kubota this year!
What wouldn't i do with mo' powa'!? Thanks Sarah! What's up Rob.
Sup GT!
Cheers with a beer
It would help me as a diesel tech constantly changing semi truck wheels eith my milwaukr 2767 20
Currently just bought a baretool milwaukee trimmer as my first m18 product, waiting to be able to get the battery hopefully in a few weeks. This would be an amazing addition to the start of my m18 collection.
you manage to explain complex concepts really simply. props
Hey sara I do trim Carpentry and I would really use this please I would love to get this giveaway
Come on Sarah @coptool hook my brother Miguel up wit dem batteries and dat supercharger!
I need to build a new garage. Lightning struck our old one and we lost it.
Awesome awesome video. Great explanation on the wide variety of batteries. I use the M18 Fuel 1" SDS Rotary Hammer to drill the walls to use 3/16 or 1/4 tapcons. I also drill thru 8 inch concrete blocks to run a conduit stub thru the wall to connect 2 4x4 utility boxes. I use it for a wide range of tasks, even drilling holes for a drop in anchor and so far the XC 5.0 does the job...luckily with 2 of em I dont really experience too much down time. This kit though would make my job so much easier and faster with the High output batts and supercharger
Those batteries are so sweet, 12 a.H for the yard, 8 ah for my construction , and the beautiful 3.o for all house to do list, nice..
For only having 18v Milwaukee sure has a litany of batteries to choose from. Commence your talking point fan boys!!!!!
Guess you never used Milwaukee, 12V range has been out quite a while ya big peter.
It's hilarious how she is just cast as a mansplaining target
You should ask someone to explain “mansplaining” to you.
Sarah knows a ton about tools. She’s also a great writer and producer. Batteries (and electronics) are a weak point for her, so it was a natural setup for this specific video, to have Rob teach her, and allow our fans to learn along with her.
Great try! Side note: People who unsuccessfully point out “wrong doings”, are usually trying to distract from their own poor behavior. Maybe spend the weekend looking at how YOU treat women in your life. And then ask one of them to explain “mansplaining” to ya!
Great job breaking down the whole Milwaukee battery lineup. I could really use that kit for building my vacation cabin in the North Carolina mountains.
Hi Rob and Sarah, thank you for the informative review! That really helped clarify a few questions we had.
We are in the midst of a major home renovation, e.g. kitchen-100%, bathrooms-100%, flooring-100% and all new interior/exterior doors. Before the project (late last year) we decided to move forward with the Milwaukee M12/M18 platforms. With multiple tools running all day long it really eats up the batteries! We’re running the M18 Hackzall, Gen 3 hammer drill/impact, Circe saw, 71/4” miter saw, orbital sander, etc...
Look forward to the next video!
I could really use this kit to help with my garage project. I've been using Milwaukee tools for my entire 23 years as an industrial electrician. No other cordless compares.
You guys are a great show to watch on RUclips and the kit would help me with all the engine swap projects to keep my impact running longer and stronger as well as keeping the light on longer and no more having to wait for battery to charge losing money with tdd that down time
With that kit every project can get done !!!!
Man, this helps a ton. I was trying to wrap my head around their battery categories to see which is which. My tools came with the XC batteries and now I know the differences.
I could use them everyday in shop working on lawn mowers to dump trucks. These are awesome and so are you guys!! Keep it up
I'm renovating our house right now with all Milwaukee power tool. I only have a 2ah and 5 ah. I could really use the HO batteries especially for my fuel circular saw, weed Wacker, blower, impact, and hammer drills. Thanks guys for the great videos!
I used up the big daddy 12.0, roto hammering holes in concrete for rebar inserts on concrete patches ....Got me through the project but barely - I was impressed and glad I went with the big battery, turns out I needed it.
I’d love this kit to keep on renovating our house. Great add to my red collection!
I just got my m12 fuel driver combo to start changing my roof at home, having this custom pack with bigger/lighter/ more power cell pack batteries will make things easier.
I run a Hot Shot Transportation Business. With this kit that you are given away will come in handy for my drivers. When they are at the yard working on their truck or trailer, this High Impact battery kit would be grateful to have on hand. With no outlet for electricity a the yard. The long amp hours would be a sweet piece of cake when trying to get thing done. Nuts and bolts and drilling holes. We would need all the amp we can get to keep moving forward without stopping and waiting for the battery to be charge up again.
I use to watch a lot of VCG videos but you guys are taking all of my views . Love your content guys !
This pack out set would be perfect for all my everyday battery output needs, weather I’m framing, doing demo, drywall hanging, installing crown or base molding. awesome video, very well explained. Keep the excellent vids coming.
I work for a non-profit Facility Manager. These kind of jobs can demand long hour days and lots of juice. I also use Milwaukee for home projects like currently framing out garage door with large 4x6s. I also would like to build a deck that needs some love and there’s nothing better than a HO Battery running lag bolts in a band! Thanks Coptool for your content and keeping us updated!
@Coptool this kit could definitely help with the kitchen/ bathroom remodel in my new(first) home!! Awesome break down!
Multiple house projects! Changing out wooden fence, cutting down some trees, and best of all, building my 3 kids an awesome fort!
Rebuilding engines, removing truck cabs, back to back tire rotations etc. these batteries and charger will extremely come in handy when working full time at a auto mechanic shop :)))
Being a plumber it is my responsibility to protect the health of this great nation. As I am sure that everyone knows this responsibility can daunting and overwhelming but fortunately I have been given the training and Milwaukee tools to protect the health of this great nation. But I can't do alone. I need your help. I could tell by this informative video that your knowledge and Packout was just what is needed for this mission. I have the training and tools but I need you to grant me the power you possess in that Packout. REMEMBER THIS IS A MATTER OF NATIONAL SECURITY! I know that you will make the right decision and we along with Milwaukee will continue to protect the helth of this great nation! GOD BLESS AMERICA!!!!
Just incase anyone was wondering yes I am joking. LOL But great video!!
Man the list of projects I could use this for is just building up ! Let’s see, I could finish building my farmhouse table, or I know I could patch the metal siding on my barn , there’s always the cows , they need a new lean to. Then again I have a really cool new Milwaukee Backpack sprayer and 5 acres of weeds to spray! Lol thanks again @coptool ! We love the show!
Sawing sawing and more sawing. I have huge exposed oak tree roots in my back yard plus a 40 foot dead pine tree that fell into my yard from the wooded lot next door. I could really use this kit to make short work of these issues and make a safer place for my children and grandchildren. Thank you!
That kit would be great to have. I just started building Adirondack chairs and cornhole boards. It would go great with my Sanders, miter saw, table saw, impacts and future router when that comes in. This has to be the first video I have seen that explains all of the batteries so well and simple. Thanks Cop Tool
I’m slowly switching over from the “yellow” brand lol and am loving the m18 so far on my farm here in Indiana. From shop work to building fence to blowing out stalls with my m18 blower that kit would come in handy. Good video thanks.
I'm about to start remodeling my house. I would love to have that set. Thanks for the videos. You guys have helped me over the year in education me.
Brand new subscriber! Great explanation, much appreciated. I am a Marine Engineer, and I am currently working on a refit of a Super Yacht. I run Milwaukee tools and use them for everything from pumping to drilling to driving to cutting, having the ability to charge fast and use long would up my productivity BIG TIME! Thanks again for the info , and thanks for considering my application. :)
I am an electrician Working in the Dallas Fort Worth area At a lot of Baylor hospitals and this battery upgrade would be a wonderful help To get the job done without having to worry about battery life
Me and my son are building his first home. Because of some theft on the job site I recently invested in some Milwaukee M18 tools and absolutely love them. This new kit would really go a long way in helping us be able to afford a number of bare tools and expand our line of M18 tools as we move into the different phases of building a home. BTW. Your explanation of the battery line up was great. I only knew about half of the story and really didn’t have a clear idea understanding of the full battery line. Thank You!
This would be perfect for the deck and shed projects I have lined up for next year along with my ongoing home remodeling projects.
Awesome battery choices from Milwaukee. Those batteries will be an awesome choice for me and the job field I’m in. I am a Mechanic/technician for Volkswagen The extra battery power from this kit will be able to supply me with the battery power to remove rusty on especially older vehicles I have to work on. I hope I win this kit this be an awesome blessing 🤞🏾
Great video as always. This Packout of power would be great for getting the kitchen renovation done this year and will enjoy the extra power for getting the yard work done with my new Quik-Lok system.
Love the tools as I'm a auto mechanic and it does make my work going way faster than before, I mostly struggling taking big crank bolts off of the car and these tools did it with no sweat at all...Love it and still buying more ...
Wowzah, what a pack. Would definitely be useful getting projects done around the house. With that power, a pergola might have to be next. Great video.
Having just got my first set of Milwaukee tools I found this very useful thanks
Milwaukee tools have been my tool of choice over the past 10 years. I'm a farmer and a mechanic and those batteries would work awesome on my 1/2 impacts. Great job on the reviews 👍.
Awesome video as always!! Love all the Milwaukee M18 stuff, its been a HUGE game changer in my D.Y.I life lol
absolute overkill for anything i do, but having the capability to run batteries all day, all week long, even multiple weeks at a time to charge batteries is great!!
These guys would be awesome to do just about anything, whatever i have planed to do around the house, or any of my neighbors needing some help, or helping out to build my local airsoft field, not having to stop and lose time because i have all the runtime i want would be amazing!!!
My husband works in the trades and has all Milwaukee tools this would be an amazing surprise to give him. Thanks for doing this!
That looks awesome. I have a poultry farm and we’re up dating the way Equip hangs from the rafters. I have 10 bldgs that are 50’ x 500’ long. We have around 30,000 screws and lags to change out and install new ones. We could sure use these batteries on this project. Thank you,
Don
Thanks for the great videos. These batteries would come in handy for my new line of tools. I recently just changed over to all m18 cordless from corded. I build houses for a living and the more batteries the better. Thanks again!