I have battled for 2 days trying to figure out my tx6i. No matter what I do the elevators won't move on any of my planes. I will go through it now with the help of this video, and I'm confident this will work! Great video
Good vid, I might get one of these as a backup. Bind failure (if like spektrum) is probably due to short distance between tx/rx - a couple of metres minimum works best - the receivers seem to get swamped by the signal.
Hi there ! Thanks for the video - very informative. Can you tell me how to bind storm 603 and 703 receivers to the tx10i please ? I can't get any light on the receivers when plugged in to an esc power lead. This esc is bound and works perfectly to my orange receiver.
I've not used those here and a quick search shows them to be DSM2 protocol. I'd make sure that the radio is set to that before you bind (if there is an option). Best of luck
Because we can save so much money and time with having a receiver for each plane I messed around with a Redcon from BG. I do believe the nosedive was a cutout. Have you ever tested Redcon?
Cool!!!! Thank You so much!!!! How do i set up dual servo ailerons?? there is only one aileron connection but i have 2 servos! Orange Orx Tx10i with Orx R615X
Lol... Just figured it out. Now i just feel so dumb... hahahahahahahaha. The servo is on oposite position, so naturally as one goes up, the other goes down, you just have to shunt them. Thanks again, great videos.
Thanks for the help, any though on doing something to show how to get flaperons set up with this radio? I’ve been playing with it for awhile now but no luck getting both ailerons to function as flaps.
@@Painless360 yes please for flaperons and differential thrust (I have recently got the HK Lancaster Bomber V3 which needs differential thrust so I will need to upgrade to the TX10i, so a tutorial on those 2 would be very handy, thanks
Failsafe is set when the receiver is bound. It worst just make sure the throttle is shut but it is better to hold a little up elevator and a little left or right rudder as well as a closed throttle as you bind.
Greetings ...is it possible to set up a switch for Aileron breaking ( both ailerons up ) on this radio , as i have come from a Taranis this seems quite a task ...Thanks.
Great video, helped me a lot. I have this tx as well and it's really good. But there's one thing I'm struggling with- flaperons. Can you make a tutorial how to set them properly?
@@Painless360 I would also like to set up flapperons with this transmitter. I did not see a Painless360 video (or anyone else for that matter) with the Orange TX6i and flapperons. Am I missing something?
@@Painless360 Thanks for advice but, it's too late I've got one. I can't get it to work with the Orange TX6i but it will with the Spektrum Dx6i . Any ideas? Cheers Dave
Bom dia. Alquem me ajude sou brasileiro brasil. Meu radio esta em uma linguagem língua diferente. Quero colocar o idiona em português. Alquem me ajude. Help help jelp
Excellent , just bought one ,,, first ever and never used one , no one to show me etc , so all a new learn curve . Now to learn how to not crash it .
I have battled for 2 days trying to figure out my tx6i. No matter what I do the elevators won't move on any of my planes. I will go through it now with the help of this video, and I'm confident this will work! Great video
I've had guys tell me they would never trust the orange radio, but I've used one for years with no problem at all. I have the original model.
I've had the original Orange T6 for several years. It's "stone axe" reliable, has never failed or glitched.
Good vid, I might get one of these as a backup. Bind failure (if like spektrum) is probably due to short distance between tx/rx - a couple of metres minimum works best - the receivers seem to get swamped by the signal.
Thanks for sharing this tutorial, really helpful and also reassuring that this set will see me for a good while yet.
Looks cool!-! I like the orange tx!!!
Great vid, can you show us how to set the ORX TX6I to use head tracking, I tried and failed.
Hi there ! Thanks for the video - very informative. Can you tell me how to bind storm 603 and 703 receivers to the tx10i please ? I can't get any light on the receivers when plugged in to an esc power lead. This esc is bound and works perfectly to my orange receiver.
I've not used those here and a quick search shows them to be DSM2 protocol. I'd make sure that the radio is set to that before you bind (if there is an option). Best of luck
Id like to see High Med and Low setting on this. On mine, the 10ch one, it shows Normal Sport 1 and Sport 2. I'm sure thats not right :)
Great content, dude. Awesome. :)
The sport Cub S2 has three settings for beg/inter/advanced flight modes. Has anyone had luck binding these functions on this transmitter? Thanks.
I'm working on yhe same issue with the tx10i version. Flaps work but not modes.
Because we can save so much money and time with having a receiver for each plane I messed around with a Redcon from BG.
I do believe the nosedive was a cutout.
Have you ever tested Redcon?
Can you tell why it says OFF on the screen. Just got one and still finding my way around the diff screens thank you in advance
Its doing the same thing with my tx10i
The timer is disabled.
Cool!!!! Thank You so much!!!! How do i set up dual servo ailerons?? there is only one aileron connection but i have 2 servos! Orange Orx Tx10i with Orx R615X
Lol... Just figured it out. Now i just feel so dumb... hahahahahahahaha. The servo is on oposite position, so naturally as one goes up, the other goes down, you just have to shunt them. Thanks again, great videos.
Thanks for the help, any though on doing something to show how to get flaperons set up with this radio? I’ve been playing with it for awhile now but no luck getting both ailerons to function as flaps.
Nice idea, I'll add this to the list! :D
@@Painless360 yes please for flaperons and differential thrust (I have recently got the HK Lancaster Bomber V3 which needs differential thrust so I will need to upgrade to the TX10i, so a tutorial on those 2 would be very handy, thanks
What should you low and high throttle value be set at on betaflght? Thanks. Keep up the good videos
Please see my BNF Betaflight video, I cover it all in there. Best of luck!
Nice
Can you reverse switches? If you can, just reverse the throttle cut switch.
How about using the e flight safe
I notice the channel layout on the receiver is TAER. You said the transmitter layout is AETR, I’m curious how does that work?
It’s all handled by the RX. Just plug it in as described.. :)
Awesome video mate, any chance of showing us noobs failsafe set up?
Good idea!
Any news? AS3x?
Failsafe is set when the receiver is bound. It worst just make sure the throttle is shut but it is better to hold a little up elevator and a little left or right rudder as well as a closed throttle as you bind.
Greetings ...is it possible to set up a switch for Aileron breaking ( both ailerons up ) on this radio , as i have come from a Taranis this seems quite a task ...Thanks.
Possibly. I don't have the radio to try. Best of luck
@@Painless360.. success
How's the range in that radio?
Very much depends on the area that you're in but you should expect a maximum range of around one the half kilometres..
@@Painless360 Can you show how to range check on a Orange T-Six?
Great video, helped me a lot. I have this tx as well and it's really good. But there's one thing I'm struggling with- flaperons. Can you make a tutorial how to set them properly?
If you Google ‘flapperons painless360’ you’ll find my video on it. Hope it helps..
@@Painless360 I would also like to set up flapperons with this transmitter. I did not see a Painless360 video (or anyone else for that matter) with the Orange TX6i and flapperons. Am I missing something?
Will this radio work with the Orange RX RX3 S flight stabilizer receiver?
It should do, but I would check with Hobbyking support before ordering.
@@Painless360 Thanks for advice but, it's too late I've got one. I can't get it to work with the Orange TX6i but it will with the Spektrum Dx6i . Any ideas? Cheers Dave
Is it possible to change the firmware of the EU/UK version to the international version?
From what I've discovered, it appears that the older radios are fine but newer radios appear to be locked to the EU region and firmware..
Gostei
Im having some problem withe my quadcopter
ruclips.net/video/DXGVMAhG0VQ/видео.html
Without detail it's impossible to help..
Bom dia. Alquem me ajude sou brasileiro brasil. Meu radio esta em uma linguagem língua diferente. Quero colocar o idiona em português. Alquem me ajude. Help help jelp
No idea how to do that. Best of luck!