C'est extrêmement rare que je commente une vidéo mais la je n'ai pas le choix, je me dois de te dire bravo pour le travail accompli ! Vraiment magnifique !!
From a former fitter /machinist excellent work but really outside the scope of the “average” person in both machinery needed to do the fabrications, electronics, ability and know how. Your rig is bordering on a professional platform worthy of mass production, not a one off. I can’t even buy some of the products you’ve used in my host country to build this. But again bravo for your efforts.
Hello, In a first time, I would like to apologize for my late response. I receive a lot of emails following my RUclips video. 😀 Thank YOU !!!!!! 🙏🙏 A lot of people request me: - The mechanical drawings - The electrical diagrams - The software So I thought about a solution which will allow me to continue the development of the simulator and to continue to propose you always better solutions. You will have as soon as possible for 🌟FREE ACCESS🌟 in downloading at: - To the list of Built Of Material of the mechanical parts - To the electrical diagram.
Thank you so much for sharing. I think this is every boys’ dream mention sim system. But I know I don’t have enough engineering knowledge to build one from beginning, so I am so excited for waiting you diagrams. Thank you so much
Hello I'm looking for help with a simulator idea i have but i don't have the knowledge to program it, i am able to build it but i just don't know were to start with how to program it, it will be primarily designed as an aircraft simulator chair with a very unique aspect that i believe will give it the added edge over even a 6 dof simulator using only 2 dof, id very much appreciate anything you can tell me about where to go or where look up how to wire up and how to program a sim seat to work directly off the *g force* data of each game your playing, thank you for your time. Regards Josh
I made AC motor 2DOF motion platform with total 1500W power. But I rarely play Dirt rally because it doesn't implement turn acceleration. I prefer AC, ACC and Project cars. AC however has very dirty acceleration outputs that need to be filtered and therefore I have some extra delay. Also, my setup is very compact and it can be desassembled and I only use VR. I am very impressed how solid and firm your design really is
Hello!!! One question! What is the material of the cranks, spacers and green arms? Alloy 6061? Alloy 7075? Steel?? Which material could be good for keep all that heavy weigth?? Thanks!! Amazing project🎉🎉
bonjour et bravo pour ce projet. je fait des recherches de renseigneents pour realiser 1 simulateur dynamique. donc, vous avez fait le programme de la carte arduino qui commande les servo driver. y a t'il un protocole des commandes emise par arduino vers les servo driver ? car j'ai cru comprendre que ces commandes ne sont pas normalisées ? est ce que vous avez de la documentation la dessus ??
Great job!! I feel the phrase “Do It Yourself” is insufficient and is limited to supplies/hardware you can buy at your local shop. This right here, what you made, should be called “Manufacture It Yourself” or like “Lathe It Yourself”... Something that captures the essence of amount of skill and resources you need to build this awesome DOF rig
Hi, fantastic build! I was trying to look at the link to the shop for parts list, wiring diagrans etc, but it seems to be broken... Any current links or ability to access further info? Thanks 🙏
Bravo pour ta superbe réalisation ! Je suis en train de concevoir un 3DOF heave avec bras de levier moi aussi et tu m'inspire beaucoup. Tu as pensé à commercialiser le tient ? Je me demande s'il y a un marché pour les 3DOF de ce type car j'ai l'impression (de ce que j'ai lu ou vu seulement) que les simracers préfèrent la TL à l'arrière ou carrément les 6DOF. En tout cas je te souhaite plein de réussite ! (Perso je pense que je préférais acheter un 3DOF comme le tient plutôt qu'un 6 trop compliqué et laborieux à programmer)
Bon jour monsieur! This rig is amazing. I would love to build it myself, but the website in the description doesn't work. Is there any chance you can share the build dimensions, materials, etc?
Meus parabéns , lindo projeto e o mais louvável é vc colocar os parâmetros de construção para que assim outros possam se basear . Muito bom , parabéns novamente.
Love how compact it's!! And feel to work so good. Great jobs! I think that add a fourth motor for rotation must be awesome. Website is not working. Are there somewhere the documentation to DYI? Thanks!
bonjour tout d'abord super travaille serais t'il possible d'avoir les ref des composent électronique que tu a utiliser ??? ou si tu a un fichier globale pour pouvoir le reproduire merci. encore bravo c'est un travaille de malade
I literally never built anything using any electronics. my engenieering skills are 0 so thats why Im worried even if I buy materials that it would be impossible to make it
Wow, amazing job! If it's not a secret, can you say how much is it in raw raw parts (without wheel stuff, service for CNC, your time etc)? I've love to pay you for your work, but whats other costs?
Very nice build man! Too bad I dont have a CNC :D Just wondering, specially with drifting, dont you miss the yaw? Or am I missing something? I just started to really into looking building one myself and Im seeing so many options of doing it... Somehow I also like that D-Box setup, but I think that is also missing yaw....But I could be wrong :)
Yeah that's what I was thinking. Wouldn't this only be 2 dof. 3 dof is usually pitch, roll and yaw. I suppose it is 3 dof since it seems to have pitch,roll and heave.
Bonjour, merci pour cette superbe vidéo! Elle nous à beaucoup servi pour réaliser notre simulateur, pourriez-vous nous conseiller pour les réglages des 3axes, on voudrait améliorer les sensations au niveau du lacet. Merci encore bravo.
PARFAIT !!! Ce qu'on attendait d'accessible enfin. Avec mon père on aimerait s'en fabriquer un aussi; tu n'aurais pas deux trois conseils pour le choix des moteurs et réducteurs stp ?? Si tu peux nous faire une petite nomenclature, j'ai vu que le site en lien est fermé. Très Beau boulot encore. Bonne Simu : )
say i wanted you to fabricate some of the trickier parts? I could do the frame but i don't have a lot of those routing tools, etc. Would you be interested in taking that on for fair compensation?
Wooow le travail effectué est au top, jusqu'à la finition chapeaux 😁 j'aimerais beaucoup quelques choses de similaire, niveau budget faut compter environ combien sans le volant pour un tel projet ?
Ca sent le gars qui travaille en mécanique ça, vu la qualité des pièces usinés ^^ Beau travail en tout cas. J'en suis à la conception moi, je me tâte entre le choix des moteurs, tu aurais un conseil sur ce sujet ?
@@playsimulator07 Effectivement, c'est un bon choix. J'ai passé l'étape maquette, et j'ai conçu la structure générale du simulateur. Par contre j'ai du mal à choisir quel servomoteur utiliser en terme de puissance. Pouvez-vous me dire les caractéristiques des votre si ça vous dérange pas ? Merci d'avance
@@playsimulator07 Hello, your work is really amazing. It's hard to imagine. Can you send me your wire diagram? cac93lun@gmail.com and what motor model do you use? I look forward to your reply
![[PS5] GRAN TURISMO 7 Nürburgring Mitsubishi Lancer Evolution V GSR '98 (v1.54)](http://i.ytimg.com/vi/IPZntdqbGyI/mqdefault.jpg)
C'est extrêmement rare que je commente une vidéo mais la je n'ai pas le choix, je me dois de te dire bravo pour le travail accompli ! Vraiment magnifique !!
merci
I LOVE how aesthetically looks. A very careful aspect. Bravo
Best diy motion rig on RUclips! Nice work!
Thank you !
From a former fitter /machinist excellent work but really outside the scope of the “average” person in both machinery needed to do the fabrications, electronics, ability and know how.
Your rig is bordering on a professional platform worthy of mass production, not a one off.
I can’t even buy some of the products you’ve used in my host country to build this.
But again bravo for your efforts.
thank you very much, it makes me extremely happy
Hello,
In a first time, I would like to apologize for my late response.
I receive a lot of emails following my RUclips video. 😀 Thank YOU !!!!!! 🙏🙏
A lot of people request me:
- The mechanical drawings
- The electrical diagrams
- The software
So I thought about a solution which will allow me to continue the development of the simulator and to continue to propose you always better solutions.
You will have as soon as possible for 🌟FREE ACCESS🌟 in downloading at:
- To the list of Built Of Material of the mechanical parts
- To the electrical diagram.
Do you know when this will be available?
Hello! Great Work! Any News about Access?
J’ai vraiment hâte que ce soit disponible !
Thank you so much for sharing. I think this is every boys’ dream mention sim system. But I know I don’t have enough engineering knowledge to build one from beginning, so I am so excited for waiting you diagrams. Thank you so much
Hello I'm looking for help with a simulator idea i have but i don't have the knowledge to program it, i am able to build it but i just don't know were to start with how to program it, it will be primarily designed as an aircraft simulator chair with a very unique aspect that i believe will give it the added edge over even a 6 dof simulator using only 2 dof, id very much appreciate anything you can tell me about where to go or where look up how to wire up and how to program a sim seat to work directly off the *g force* data of each game your playing, thank you for your time.
Regards Josh
I made AC motor 2DOF motion platform with total 1500W power. But I rarely play Dirt rally because it doesn't implement turn acceleration. I prefer AC, ACC and Project cars. AC however has very dirty acceleration outputs that need to be filtered and therefore I have some extra delay. Also, my setup is very compact and it can be desassembled and I only use VR. I am very impressed how solid and firm your design really is
I’m trying to make my own but not sure what parts I should be buying
Magnifique, très pro comme dit précédemment, digne de l Aéronautique.
Minute 03:15: Happy man 🙂 Your face speaks for your sim rig!
What a fantastic job you did on that! Thanks for sharing!
Super clean, beautiful and solid build ! Awesome
Quel travail de dingue !! Bravo a toi 👏👏👌
It is an open project?
Can you share the components, connections, electronics, mechanical diagrams?
Is there any kind of step-by step guide?
I want too.
@@MetaversoJuliXR notiguan.wixsite.com/playsimulator
@@playsimulator07 how much cost the ready project for delivery ?
Very good. Congratulations on the project. It was magnificent.
Great job ! Can you please explain or share electronics parts and the solidworks files for this? (schema, component, connection etc.)
Amazing job. Congratulations!!!
Excellent work! Very nice looking design. Just perfect. I would try also if I had tools, space, time and knowledge. So I just build it in my head 😅
Superbe hélas peu de réponses apportées à ceux qui s intéressent à votre realisation
Super boulot ! Et c'est très propre !! Bravo :)
amazing simulator keep uploading the videos!!!
so cool nice work.
Brilliant! just wishing if some of us could have all that time also to do this also
Thanks you
Great job, amazing nice, functional and still simply design. Thanks for inspiration.
Hello!!! One question!
What is the material of the cranks, spacers and green arms? Alloy 6061? Alloy 7075? Steel??
Which material could be good for keep all that heavy weigth?? Thanks!! Amazing project🎉🎉
bonjour et bravo pour ce projet.
je fait des recherches de renseigneents pour realiser 1 simulateur dynamique.
donc, vous avez fait le programme de la carte arduino qui commande les servo driver.
y a t'il un protocole des commandes emise par arduino vers les servo driver ?
car j'ai cru comprendre que ces commandes ne sont pas normalisées ?
est ce que vous avez de la documentation la dessus ??
trés chouette et de trés nombreuse d'heure de taf et de recherche félicitation
Great job!! I feel the phrase “Do It Yourself” is insufficient and is limited to supplies/hardware you can buy at your local shop.
This right here, what you made, should be called “Manufacture It Yourself” or like “Lathe It Yourself”... Something that captures the essence of amount of skill and resources you need to build this awesome DOF rig
Hi, fantastic build! I was trying to look at the link to the shop for parts list, wiring diagrans etc, but it seems to be broken... Any current links or ability to access further info? Thanks 🙏
Hello, You can contact me by mail, notiguan@gmail.com
Bonjour j’adore votre simulateur. J’ai comme projet d’en fabriquer un. Serais t’il possible d’avoir des renseignements sur sa conception ?
Bonjour, Je vous invite à lire le post juste en dessous. Si besoin de plus de renseignements vous pouvez m'envoyer un mail à notiguan@gmail.com
Hi, what software did you use?
Bravo pour ta superbe réalisation !
Je suis en train de concevoir un 3DOF heave avec bras de levier moi aussi et tu m'inspire beaucoup. Tu as pensé à commercialiser le tient ? Je me demande s'il y a un marché pour les 3DOF de ce type car j'ai l'impression (de ce que j'ai lu ou vu seulement) que les simracers préfèrent la TL à l'arrière ou carrément les 6DOF. En tout cas je te souhaite plein de réussite !
(Perso je pense que je préférais acheter un 3DOF comme le tient plutôt qu'un 6 trop compliqué et laborieux à programmer)
can RSRBR 2021 or any of the previous version works with Simtools or SimRacing Studio software for motion simulator?
That is so dope!
thanks 😁
Bon jour monsieur! This rig is amazing. I would love to build it myself, but the website in the description doesn't work. Is there any chance you can share the build dimensions, materials, etc?
Beautiful
Travail juste parfait. Bravo pour la qualité de cette réalisation. Pourrait-on avoir une idée du budget final ?
Merci par avance
Great job !
Meus parabéns , lindo projeto e o mais louvável é vc colocar os parâmetros de construção para que assim outros possam se basear . Muito bom , parabéns novamente.
InstaBlaster...
Love how compact it's!! And feel to work so good. Great jobs!
I think that add a fourth motor for rotation must be awesome.
Website is not working. Are there somewhere the documentation to DYI? Thanks!
no, sorry my website is down
thank you very much for your message it makes me extremely happy
sorry again about my website
Hey, your web page is out if service... Your sim looks amazing is there any way I can download the plans and diagrams???
What gearboxes did you used?
1:60
this is whats called a "pro gamer move"
Very nice...
Crazy! i wana make one too but i have no skills in mechanical engineering :( and its so expensive if you choose to go for buying one.
bonjour tout d'abord super travaille serais t'il possible d'avoir les ref des composent électronique que tu a utiliser ??? ou si tu a un fichier globale pour pouvoir le reproduire merci.
encore bravo c'est un travaille de malade
Amazing work, do I need experience to assemble it if I had the blueprint? Also what would be the price for the materials that you used also?
I literally never built anything using any electronics. my engenieering skills are 0 so thats why Im worried even if I buy materials that it would be impossible to make it
Super Cool
Salut franchement ton travail fait très pro. Où a tu acheter les blocs reducteurs et quelle ratio ils ont ?
Hi, the motor link you provided doesn’t work. Please share an updated link and the motor name.
Really good job. Can you explain or share electronics parts (schema, component, connection etc.)
Send me an email notiguan@gmail.com
@@playsimulator07 can I also have the schemes, components, connections the programs..
Hi do you maybe have a wiring diagram amd parts list?
available in the shop www.playsimulator.fr/
this is insane , i want one .....
notiguan.wixsite.com/playsimulator
it is really good. well done .How much did it cost?
Wow, amazing job! If it's not a secret, can you say how much is it in raw raw parts (without wheel stuff, service for CNC, your time etc)? I've love to pay you for your work, but whats other costs?
hello, does the arduino resist? do you have the complete design of this item? you sell?
the feel is realistic or like over reactive?
Hello, can i have the electrical plan please with the mark of motors ?
Masterpiece man!!! Shipping to Poland available and how much it costs?
Good job mate, what motors did you use, Nema 34 servo motor?
Brushless motor 1KW LEADSHINE
Bjr, TOP! qu'elle est la ref du moteur et du reducteur? Merci,,
Moteur 3.2Nm servo, reducteur 1:60
I really love it, please howmuch would cost me all this ?
If I follow exactly step by step your model?
Very nice build man! Too bad I dont have a CNC :D
Just wondering, specially with drifting, dont you miss the yaw? Or am I missing something? I just started to really into looking building one myself and Im seeing so many options of doing it... Somehow I also like that D-Box setup, but I think that is also missing yaw....But I could be wrong :)
Yeah that's what I was thinking. Wouldn't this only be 2 dof. 3 dof is usually pitch, roll and yaw. I suppose it is 3 dof since it seems to have pitch,roll and heave.
It's look aweeesome, How long did it take you to do it?
It took me about 1 year from modelling to construction.
Bonjour, merci pour cette superbe vidéo! Elle nous à beaucoup servi pour réaliser notre simulateur, pourriez-vous nous conseiller pour les réglages des 3axes, on voudrait améliorer les sensations au niveau du lacet. Merci encore bravo.
Is it possible to adapt this platform for aircraft simulators?
PARFAIT !!! Ce qu'on attendait d'accessible enfin.
Avec mon père on aimerait s'en fabriquer un aussi;
tu n'aurais pas deux trois conseils pour le choix des moteurs et réducteurs stp ??
Si tu peux nous faire une petite nomenclature, j'ai vu que le site en lien est fermé.
Très Beau boulot encore.
Bonne Simu : )
Bonjour. Auriez vous la ref des moteur svp?
say i wanted you to fabricate some of the trickier parts? I could do the frame but i don't have a lot of those routing tools, etc. Would you be interested in taking that on for fair compensation?
Hello, You can contact me by mail, notiguan@gmail.com
Hi there I would like to know how do you connecting the arduino up and use of code with the motors. how may I contact you? email or signal app?
Wooow le travail effectué est au top, jusqu'à la finition chapeaux 😁 j'aimerais beaucoup quelques choses de similaire, niveau budget faut compter environ combien sans le volant pour un tel projet ?
Amazing sim! I want to build a similar motion platform for my racing sim, how much did the motion platform cost?
Top o projeto parabéns
Hi nice project can you share arduino code and electronics compnant specs
I want too
The arduíno code
Hi share arduino code and all electronics I am ready to pay for the same
The Project is still available? I can't access the link.
Hello, You can contact me by mail, notiguan@gmail.com
amazing setup, but i did notice you are not running 3dof or am i mistaken
👍
voll coolen Simulator )
Your site is down…where can we purchase?
Hello, You can contact me by mail, notiguan@gmail.com
Legal!
How much did you spend?
hi, can i use arduino uno for this?
yes
Ca sent le gars qui travaille en mécanique ça, vu la qualité des pièces usinés ^^ Beau travail en tout cas. J'en suis à la conception moi, je me tâte entre le choix des moteurs, tu aurais un conseil sur ce sujet ?
JE PEUX QUE TE CONSEILLER DE PRENDRE DES SERVOS MOTEUR
@@playsimulator07 Effectivement, c'est un bon choix. J'ai passé l'étape maquette, et j'ai conçu la structure générale du simulateur. Par contre j'ai du mal à choisir quel servomoteur utiliser en terme de puissance. Pouvez-vous me dire les caractéristiques des votre si ça vous dérange pas ?
Merci d'avance
If you have Money for the tools to make this staff, i could buy 3 dynamics cockpit, nice project aniway
thank you for your comment, yes you can buy these dynamic engines, if you want to build your own simulator I wish you success.
Can you please share the solidworks files for this?
Send me an email notiguan@gmail.com
@@playsimulator07 Hello, your work is really amazing. It's hard to imagine. Can you send me your wire diagram? cac93lun@gmail.com and what motor model do you use? I look forward to your reply
Motor config please ?
wow.
😊
comment ous contacter ?
DIY?? I’d need to have an engineering degree to make one of them lol
watch this guys video ruclips.net/video/rfB93iPcQvk/видео.html he shows a real DIY project that an average person could build.
Hi. Very Good. You would be able to create it on commission. I would like to buy it for you.
Hello, You can contact me by mail, notiguan@gmail.com
Great job I sent an email but no response??
TODO muy bonito pero sacaran algo alguna vez que no cueste una burrada
that is a sexy BEAST..!
How Says DIY , but not sharing info.. I would buy one if the price wasn't stupid..
only thing i got left to build....
diy with an engineering fitted out workshop
DIY....for a mechanical engineer with access to giant milling machines.
Nice build though.
Aww links broke 😢
Hello, You can contact me by mail, notiguan@gmail.com
Website gone... Sad.
I know, I'm working on it right now
because we all have and can afford CNC equipment. cheaper to buy one, yet again
Lakoni lakoni sak matine nyowomu lakoni....