I totally love this configuration. Doesn't look like I'm gonna be able to buy a Raptor going for $80k anytime soon. This set up might be the best fit for me. Thanks.
I have a 2017 stx which came with the 20 inch wheels. I’m afraid of rubbing but love the way 35s look with a level. 33 isn’t enough tire, on 20in wheels especially.
Do you have the FX4 as well? I have a 15 XLT and keep getting different feedback on if it will work without cutting or rubbing and trying to figure out if maybe the FX4 makes a difference at all.
@@travismayer6536 Yes I have the FX4, mine is a 2018 FX4 Lariat 502a with the mammoth 2.5" leveling kit. I didn't have to trim anything and there is no rubbing at all. I'm very happy with this set up. If you keep your eye out, you can pick up new raptor wheels and tires for around $1,200.
Did you have to do any trimming for adding the 35" Tires on the 2017 F150? Are you planning to correct/toon your computer for the new tire size/auto shifting?
Wil Spaulding When you change bigger tires you need to calibrator speed tool. It will automatically change gears. It will cost a little bit more fuel for urban and less fuel for hight way. You will feel your car lighter and quieter when you attach raptor wheel on f150. so raptor wheel they have two option index 315/70 / 17r 113T with maximun 45psi and 315 / 7017r 121S with 65psi. There will be no need to cut anything. no rub
Like father, like son. He going after that job in a few years. Great update to your POV. The idea behind the scenes relating to aerial footage sounds great.
Great review. And thank you for acknowledging the headlight-blinding-other-drivers issue that so many owners ignore. If you are putting on a leveling kit, adjust your headlights. And, if you are going to haul payload or tow a lot, don't do a leveling kit. It just makes no sense to take away the unloaded stance and make a loaded stance when empty only to load it down and make the backend squat a couple more inches and have your truck dragging it's butt like a wormy dog across the lawn. Ha.
I don’t adjust my headlights so that I’m just as much of a douche as everyone with their super bright halogen low beams. I will even blast them with my light bar if they high beam me.
Did you have to trim your inside plastic? The raptor rims and tires 35s fit fine with a 2 inch level kit? Just asking because I have a 2010 f150 4X4 lariat supercrew and I’m planning on putting a leveling kit with the same raptor rims just don’t know what tire size would fit
Any rubbing after the leveling kit and raptor 35s?... I always wanted a raptor (which is out of my reach)..now I am really considering a similar setup like yours!
I purchased a 2018 STX supercrew 4x4 used this past January. I love my truck. With that said, I am very interested in your wheel and tire combo. Now that its been a while, what do you have to say about the leveling kit and wheel and tire combo. Have you been off road with the leveling kit yet? If so how was it?
Do you think the 2.5 is necessary or a 2.1” with the billsteins instead of pucks for the level will be enough for the wheels and tires to clear everything?
Do you know what the offset was on those raptor rims? Did you have any trouble with the tires rubbing your shocks or arm bar for the shocks or otherwise?
Just now seeing your comment. We cover the wheels and tires in the video, but here are the answers to your questions. ZERO modifications to the crash bars. The wheels are ACTUAL pull-offs from a raptor. So they are 17” wheels. And the tires are 35X12.5R17.
yeah, just remove like 10-ish bolts and the piece basically falls off. there is a large plastic piece that kinda supports the air damn in the middle, but i just bent it backwards so it doesn't stick down. i picked up a few nuts from Lowes and then put the bolts back into the holes they came out of so it looks like something is missing. literally a 10 minute job (not counting the trip to lowes of course)
I have the same truck except I went for the XL version instead of the XLT. No chrome, black mirror housing, blacked out grill, and vinyl interior. To each their own but in my opinion XL offers the most flexibility for modifications later on.
I don't understand what is so surprising. They have fit 35' for the last 3 generations, but I think you should have gone with Bilstein 5100 shocks instead of the block.
@@TCcustoms_ that makes sense. I had a block on my 2004 and I've done Bilstein on my 2011 and my 2016. So much better.. if you get the urge to switch it up, it's worth the $400
@@AndrewMcSpaddendid the raptor wheels/tires fit just fine with no trimming/rubbing anywhere on your trucks with the billsteins? I have billsteins on my 17 and really want to go with those wheels n tires but afraid they won’t fit! 😱
Looks good! What if anything did you do to recalibrate the truck (engine, transmission, speedometer) for the larger tires? Do you expect the larger tires to prematurely ware the transmission? Asking because I haven’t had good luck with any Ford automatic transmissions. In fact, of the last 4 Ford trucks I’ve owned (‘99 Ranger, ‘97 F-250 PSD, ‘02 F-350, & ‘67 F-100 w/C-6) only the C-6 was reliable. Now I drive a manual ‘15 Tacoma, but it’s too small and the MPG sucks. Considering a Ford 150/250 again but still am concerned about the automatic transmissions.
@@jcmcadams08able You take apart the rear diff and change out the gears for a new ratio. Also get a tune to account for bigger tires and new diff ratio
Did you regear the truck to 4.10 or 4.56 gears? What did your truck come with from the factory? Did you get the speed calibrated or transmission to even out the shifts to accommodate for the larger tires?
Any follow up on the Mammoth kit? I am trying to decide whether to go with the leveling blocks or the Bilstein 5100 adjustable shocks. Hope all is well with the family.
So please tell me are you having any trouble at all with putting the Raptor tires on the your truck ? Cause that is what I want to do cause I like more rubber on the road rather those 20'" rims that are on newer trucks today. So again, those tires do ride very well and the truck handle well with those tires ??
Hey bud, love your content. Was wondering if you could suggest a wheel with the same offset as a Raptor wheel? I have a 2017 2.7 v6, love it, don’t ever want to get rid of it. I love the way your truck stands and would really like to replicate it.
I wish I could get a new set of wheels on my truck. I have a 2012 xlt. It is my first truck and the guy before me spray painted. It is a grey extended cab with the same wheels as the STX. But spray painted and I am trying to get the paint off while keeping them stock so I do not have to damage the finish on the wheels.
hello Mitch, I have the very same truck (and I LOVE it). After about a month of using the leveling kit do you recommend it or do you have another opinion? and what are the disadvantages of installing it?
I’m getting a great deal on a set of those raptor wheels and the tires tomorrow and they read 315/70/17R is that exactly what yours are? Thank you in advance!
Did you regear your axles? no power loss? aren't revs to high in highway (65 mph)? I'm changing my 32's stock tires to a 34's with a 2.5" leveling kit on a '17 F150 Supercrew 4X4 3.5 ecoboost, so it will be very helpful your experience.
Very nice. I had that exact same truck. Traded for a 2017 Tacoma (yes, yes...I know... :/ ) but I'm picking up a 2014 Fx4 (with the luxury package woohoo) in ingot silver next week. Just wanted to say that is a gorgeous truck and very well done with the Raptor take-offs. Are those from the current model year Raptor? Apologies in advance as I don't follow the Raptor wheel changes by model year too closely. Well done, Sir!
Oh wow, didn't realize this is the Town and Country in Alabama that I bought my truck from haha. Doesn't the FX4 come with a higher ride height than standard trims? If so then I'm assuming these 35" wouldn't fit my STX with a 2" leveling kit
Hey Mr. Wattz. Forgive me if im spelling your name wrong.i have a question. I have a 2015 Ford XLT and I just got the 2014 Raptor SVT wheels with tires.my truck does not have a lift kit yet on do you think it will be an issue for installing those without the lift kit? Also, how much did your gas consumption change? Thank you.
Hello town and country tv Quick question so those are 315/70/17? And also does it rub like the ubber control arm or anything because they are 315’s Thanks By the way happy thanksgiving!
Nice truck. I have the same truck but in black. I think I'm going to do the same wheel setup. If your considering on doing an excuast I have the flowmaster 40 series. Sounds amazing
Did you have to put the tire sensors in the raptor wheels from your originals? I’m wanting to put a set on my 07 f150 with the 2.5 level kit, but didn’t know about the wheel sensors.
I paid $45,000 for a 2016 Ram SLT 4x4 crew with zero options. A year later I paid $47,000 for 2017 F150 XLT 4x4 crew with navigation, heated seats and mirrors, back up camera and power everything. Yes it did come with cloth seats but for the extra $2,000 it felt like I got 10x the truck.
Probably the weirdest question you'll get on this... but brand of child seats? Have 2 in boosters and 1 about to move out of baby seat. Thanks in advance. Rest of the truck looks great.
Do you think this same setup would fit with a 4x2 f150 as opposed to a 4x4? I am looking to get the same leveling kit, but I have heard that wheel and tire setup will not fit.
I need real snow chains (no cables, full square or twisted link chains) for off road use. How much offset do I need to remove to fit them? Stock offset is 44mm and there is only about 1/2" of suspension clearance. I'm thinking that 24mm offset wheels would give just over an inch of room, that's plenty for decent chains.
Do you have a part # on the Ford accessories tonneau cover? Im trying to locate one but cant find it. Wondering if it was discontinued? Also part # for the bed mat?
Do you have any issues with the tonneau cover holding water? I bought a used factory cover for a 6.5' bed that came off a 2015 and it is completely waterlogged and very heavy.
What happens when you have a load in the bed with that leveling kit? Does it negatively effect handling? Would those tires rub without the leveling kit 🤔
i want to install this wheels in my xl truck 2015 but id read some forums saying that if i put this wheels im gonna need to change the gear ratios.. any opinion about it?
I have a 2013 Ford F150 FX4 Super Cab 5.0L Coyote and running (2020) Raptor Wheels with the LT315/70R17 BF Goodrich All-Terrain T/A KO2's and looking for a 4" lift I can use with this setup. Are there any lifts that will allow you to run the "OEM" 17" wheels? Theses are the +34 offsets. Thanks for any info you can offer!
![Seungmin "그렇게, 천천히, 우리(As we are)" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/kAzmhLHePqU/mqdefault.jpg)
I totally love this configuration. Doesn't look like I'm gonna be able to buy a Raptor going for $80k anytime soon. This set up might be the best fit for me. Thanks.
That’s a sharp truck
I have a 2017 stx which came with the 20 inch wheels. I’m afraid of rubbing but love the way 35s look with a level. 33 isn’t enough tire, on 20in wheels especially.
This is my exact set up and I love it. no rubbing at all.
Do you have the FX4 as well? I have a 15 XLT and keep getting different feedback on if it will work without cutting or rubbing and trying to figure out if maybe the FX4 makes a difference at all.
@@travismayer6536 Yes I have the FX4, mine is a 2018 FX4 Lariat 502a with the mammoth 2.5" leveling kit. I didn't have to trim anything and there is no rubbing at all. I'm very happy with this set up. If you keep your eye out, you can pick up new raptor wheels and tires for around $1,200.
@@brandonkoon3441do you know if a 2” level using billsteins (no pucks) would suffice to allow the raptor wheels/tires to fit too?
I thought it was a video on 35i ch tires and how they fit, not overall truck review.
Just convinced me to go with the Raptor wheel/tire setup on XLT. Cool video Mich
Jerry same here man
Time to add that FORD Raptor like grill now :P
Nice Truck!!
Did you have to do any trimming for adding the 35" Tires on the 2017 F150? Are you planning to correct/toon your computer for the new tire size/auto shifting?
Wil Spaulding When you change bigger tires you need to calibrator speed tool. It will automatically change gears. It will cost a little bit more fuel for urban and less fuel for hight way. You will feel your car lighter and quieter when you attach raptor wheel on f150. so raptor wheel they have two option index 315/70 / 17r 113T with maximun 45psi and 315 / 7017r 121S with 65psi. There will be no need to cut anything. no rub
Bought a F150 because of your videos, I am loving mine! Thank you from Massachusetts!
Like father, like son. He going after that job in a few years. Great update to your POV. The idea behind the scenes relating to aerial footage sounds great.
No, I think he'll grow up to own a -Ford- Lincoln dealership :)
Love the leveled out look on these! Now if it had tow mirrors and the 6.5 foot bed itd be the exact spec I would get for myself
Great review. And thank you for acknowledging the headlight-blinding-other-drivers issue that so many owners ignore. If you are putting on a leveling kit, adjust your headlights. And, if you are going to haul payload or tow a lot, don't do a leveling kit. It just makes no sense to take away the unloaded stance and make a loaded stance when empty only to load it down and make the backend squat a couple more inches and have your truck dragging it's butt like a wormy dog across the lawn. Ha.
I don’t adjust my headlights so that I’m just as much of a douche as everyone with their super bright halogen low beams. I will even blast them with my light bar if they high beam me.
any trimming or other mods required to fit those tires? I've been told they simply wont fit with just a 2.5 inch level.
What gear ratio do you have in rear end and what impacts have you noticed to the fuel mileage? Thanks.
hopefully the same gear ratio as the front end
Do your tires rub?
Looking good! What have you done about the front crash bars with the 35’s?
Any update on your leveling kit?
Do you recommend it?
Did you have to trim your inside plastic? The raptor rims and tires 35s fit fine with a 2 inch level kit? Just asking because I have a 2010 f150 4X4 lariat supercrew and I’m planning on putting a leveling kit with the same raptor rims just don’t know what tire size would fit
Any rubbing after the leveling kit and raptor 35s?... I always wanted a raptor (which is out of my reach)..now I am really considering a similar setup like yours!
Very nice stance! Did the raptor wheels bolt on directly with no spacers? Do you know the offset of those wheels?
Any answer to this?
I purchased a 2018 STX supercrew 4x4 used this past January. I love my truck. With that said, I am very interested in your wheel and tire combo. Now that its been a while, what do you have to say about the leveling kit and wheel and tire combo. Have you been off road with the leveling kit yet? If so how was it?
Looks great. Did you use any wheel spacers? Offset looks pretty dang good. Sorry if I missed it mentioned earlier.
No worries! No spacers! Just a 2.5” leveling kit, and raptor wheels and tires! It’s really that simple!
Good deal. Thanks!
Do you think the 2.5 is necessary or a 2.1” with the billsteins instead of pucks for the level will be enough for the wheels and tires to clear everything?
Great looking pickup.
Thanks for sharing!
Do you know what the offset was on those raptor rims? Did you have any trouble with the tires rubbing your shocks or arm bar for the shocks or otherwise?
Raptor is +34 or +35mm offset, stock is +44mm
Looks good!! Did you have to remove or cut the crash bars? Any rub on full crank? Would you happen to know BS and offset of raptor rims? Thanks
Any answer to this?
What size are the rims and tires????
Also did u cut the crash bars out????
Just now seeing your comment. We cover the wheels and tires in the video, but here are the answers to your questions. ZERO modifications to the crash bars. The wheels are ACTUAL pull-offs from a raptor. So they are 17” wheels. And the tires are 35X12.5R17.
Thanks.
😁
35x12.5 r17 will fit in f150 platinum 2015 with a leveling kit?
Great looking truck! Will the truck fit into a standard height garage with the larger tires and leveling kit?
Great looks
Oh nice! Was it easy to take that front wind thing off the bumper?
yeah, just remove like 10-ish bolts and the piece basically falls off. there is a large plastic piece that kinda supports the air damn in the middle, but i just bent it backwards so it doesn't stick down. i picked up a few nuts from Lowes and then put the bolts back into the holes they came out of so it looks like something is missing. literally a 10 minute job (not counting the trip to lowes of course)
Nice truck..I plan to do the same lift and tires..whats the size of those KO2's
I have the same truck except I went for the XL version instead of the XLT. No chrome, black mirror housing, blacked out grill, and vinyl interior. To each their own but in my opinion XL offers the most flexibility for modifications later on.
Sweet truck man, keep up the good work.
Did you have to recalibrate the speedometer for the tires
I don't understand what is so surprising. They have fit 35' for the last 3 generations, but I think you should have gone with Bilstein 5100 shocks instead of the block.
You’re right, it would’ve been nice to go with the better suspension... but I truly wanted it leveled for as cheap as possible. It’s a lease.
@@TCcustoms_ that makes sense. I had a block on my 2004 and I've done Bilstein on my 2011 and my 2016. So much better.. if you get the urge to switch it up, it's worth the $400
@@AndrewMcSpaddendid the raptor wheels/tires fit just fine with no trimming/rubbing anywhere on your trucks with the billsteins? I have billsteins on my 17 and really want to go with those wheels n tires but afraid they won’t fit! 😱
how much did your mpg change from the lift and tires/wheel?
Looks like a lariat didn't know you could get a xlt with console shift and paint matched bumper or sunroof
You used the mammoth leveling kit. Was it only the front spacers or was there anything added to the back?
Been missing your videos. Post more soon. Truck looks awesome. Roll Tide
hello, epic truck ! what did you do with the crash bars infant and behind the front tires???
Nothing! Zero modifications other than the level kit!
Will that setup work with a 2 in level kit ?
Same question
Nice! Where does the edge of tread sit from the body? Interested in the stance with these rims.
i was wondering that too, but looks like they are pretty much flush with the body
Looks good! What if anything did you do to recalibrate the truck (engine, transmission, speedometer) for the larger tires? Do you expect the larger tires to prematurely ware the transmission? Asking because I haven’t had good luck with any Ford automatic transmissions. In fact, of the last 4 Ford trucks I’ve owned (‘99 Ranger, ‘97 F-250 PSD, ‘02 F-350, & ‘67 F-100 w/C-6) only the C-6 was reliable. Now I drive a manual ‘15 Tacoma, but it’s too small and the MPG sucks. Considering a Ford 150/250 again but still am concerned about the automatic transmissions.
Mpg calculation can be recalibrated in the dash. Takes 2 minutes.
@Collin McKinney stock tires on a F150 are 33's i have a 2017 and they are stock off the lot with 33's
Collin McKinney.... How do you accomplish that?
@@jcmcadams08able You take apart the rear diff and change out the gears for a new ratio. Also get a tune to account for bigger tires and new diff ratio
Collin McKinney. Thanks for the reply! I assume you have to do the front too if it’s 4x4 drive ?
Did you do any trimming or bar cutting?
Thanks in advance.
I had to cut the front crash bars to fit. There will be rub on the plastic at full tilt. You can trim this if you wish as well.
@@matteovivianowhy did you have to cut the front crash bar? OP said he had no cutting/trimming and no run anywhere…what year/model is yours?
@@cwal_21OP is not correct. You will have to trim the crash bars.
@@cwal_212016 F150 4x4 5.0L
@@matteoviviano that’s odd, what year model is yours? Maybe different than the OP’s?
Awesome truck man, did you have to get new TPMS sensors or anything?
Thanks bro! The pull-offs had the TPMS’ already in the tires! 🙌🏻
Great truck !
Do you have any rubbing issues? Any failures as of yet? I’m thinking about adding this to my wife’s truck as a gift ;-)
I believe you have to cut the front crash bars. It barely touches the rear so I did not cut those.
Did you regear the truck to 4.10 or 4.56 gears? What did your truck come with from the factory? Did you get the speed calibrated or transmission to even out the shifts to accommodate for the larger tires?
I have 3.55’s from the factory. I did not re-gear, and I really don’t need to. The Speedo is off by 5mph when doing 70mph.
@@TCcustoms_ Just out of curiosity, how much did your MPG drop and how much higher rpm's do you run with the 35's compared to stock?
Any follow up on the Mammoth kit? I am trying to decide whether to go with the leveling blocks or the Bilstein 5100 adjustable shocks. Hope all is well with the family.
What size is the rim? What is the tire size? Raptors appear to have different options.
Raptor has only one option. 35x12.5 BFG wrapped around a 17” wheel.
@@TCcustoms_actually 315/70/17 if I’ve read that correctly in places
Is it possible that we could see the expedition with the diesel or possibly the excursion coming back with that diesel on a very limited bases ?
Do you have any rubbing
So please tell me are you having any trouble at all with putting the Raptor tires on the your truck ?
Cause that is what I want to do cause I like more rubber on the road rather those 20'" rims that are on newer trucks today.
So again, those tires do ride very well and the truck handle well with those tires ??
Is there any noise when braking, like when the ABS is activated?
Hey bud, love your content. Was wondering if you could suggest a wheel with the same offset as a Raptor wheel? I have a 2017 2.7 v6, love it, don’t ever want to get rid of it. I love the way your truck stands and would really like to replicate it.
Dude! Perfect DD truck! Love the wheels and tires makes it look mean 👌🏼 keep up the great work! Love all the videos y’all make👍🏼👍🏼👍🏼
Awesome I have my 2005 f150 set up kinda like that I gave it to my mom when I got my Silverado
Hello from San Diego nice video & sweet ride😎👍
did you have to trim anything>?
NOTHING had to be trimmed! 🙌🏻
Sweet truck. The baby bed doesn't work for what I need but damn that looks good
What did you do about the crash bars rubbing
Is the level kit only for the front?
you didn’t need to lift the rear at all for that tire size?
The back of the truck is completely stock!
I wish I could get a new set of wheels on my truck. I have a 2012 xlt. It is my first truck and the guy before me spray painted. It is a grey extended cab with the same wheels as the STX. But spray painted and I am trying to get the paint off while keeping them stock so I do not have to damage the finish on the wheels.
hello Mitch, I have the very same truck (and I LOVE it).
After about a month of using the leveling kit do you recommend it or do you have another opinion? and what are the disadvantages of installing it?
I’m getting a great deal on a set of those raptor wheels and the tires tomorrow and they read 315/70/17R is that exactly what yours are?
Thank you in advance!
Did you regear your axles? no power loss? aren't revs to high in highway (65 mph)? I'm changing my 32's stock tires to a 34's with a 2.5" leveling kit on a '17 F150 Supercrew 4X4 3.5 ecoboost, so it will be very helpful your experience.
JC Heras your rpms will be lower with bigger tires on stock gears
Very nice. I had that exact same truck. Traded for a 2017 Tacoma (yes, yes...I know... :/ ) but I'm picking up a 2014 Fx4 (with the luxury package woohoo) in ingot silver next week. Just wanted to say that is a gorgeous truck and very well done with the Raptor take-offs. Are those from the current model year Raptor? Apologies in advance as I don't follow the Raptor wheel changes by model year too closely. Well done, Sir!
Thank you! And yes, those are from a new model Raptor. I'm thinking it was a 2018.
Oh wow, didn't realize this is the Town and Country in Alabama that I bought my truck from haha. Doesn't the FX4 come with a higher ride height than standard trims? If so then I'm assuming these 35" wouldn't fit my STX with a 2" leveling kit
No it doesn't and yes they will.
Hey Mr. Wattz. Forgive me if im spelling your name wrong.i have a question. I have a 2015 Ford XLT and I just got the 2014 Raptor SVT wheels with tires.my truck does not have a lift kit yet on do you think it will be an issue for installing those without the lift kit? Also, how much did your gas consumption change? Thank you.
Yes. You will HAVE to get at least a 2.5” leveling kit, or those tires will not fit.
@@TCcustoms_will a 2” using billsteins work?
Hello town and country tv
Quick question so those are 315/70/17? And also does it rub like the ubber control arm or anything because they are 315’s
Thanks
By the way happy thanksgiving!
Nice truck. I have the same truck but in black. I think I'm going to do the same wheel setup. If your considering on doing an excuast I have the flowmaster 40 series. Sounds amazing
Did you have to put the tire sensors in the raptor wheels from your originals? I’m wanting to put a set on my 07 f150 with the 2.5 level kit, but didn’t know about the wheel sensors.
I thought u were getting white?! Ruby red is nice...almost as nice as lightning blue 😛
After two months would you recommend this lift? Love your vids!
Yeah I would. It’s a little stuffed than stock, but I’d do it all over again given the opportunity.
@@TCcustoms_ did you have to trim your crash bars?
@@matthewparker9463did you have to trim anything
The fact that Ford gives you cloth seats for $50,000 still sickens me (owner of a paid-off Ford).
Zaine Ridling 97 ranger? Just joking.
why? I wouldn't take leather if you gave it to me.
I like leather and the fabric ford offers. Obviously the leather is easier to clean, but the fabric is very comfortable!
Zaine Ridling seriously. Last week I bought a 2018 F-150 XLT. All the bells and whistles but damn cloth seats
I paid $45,000 for a 2016 Ram SLT 4x4 crew with zero options. A year later I paid $47,000 for 2017 F150 XLT 4x4 crew with navigation, heated seats and mirrors, back up camera and power everything. Yes it did come with cloth seats but for the extra $2,000 it felt like I got 10x the truck.
Do you have to put a 2 inch level kit in the front before installing the raptor rims or could you put them without the kit?
no, you have to do at least 2" level or they wont fit
Probably the weirdest question you'll get on this... but brand of child seats? Have 2 in boosters and 1 about to move out of baby seat. Thanks in advance. Rest of the truck looks great.
I have this setup on my 2010 Ford expedition el with ready lift kit
Will the level kit void the warranty for stuff like ball joints cv axles front differentials etc.?
Have you had any problems with the clips for the tonneau sticks breaking?
Do you think this same setup would fit with a 4x2 f150 as opposed to a 4x4? I am looking to get the same leveling kit, but I have heard that wheel and tire setup will not fit.
Do you think Katzins leather seat are good?
Yes! That’s primarily the company we use
Roush has those rebaged to their own name....Good stuff!
I'm going to do same thing only 2" left tho do u think it will rub
Sonny Dbaby... Did you do the 2 inch level? How did it work?
I need real snow chains (no cables, full square or twisted link chains) for off road use. How much offset do I need to remove to fit them? Stock offset is 44mm and there is only about 1/2" of suspension clearance. I'm thinking that 24mm offset wheels would give just over an inch of room, that's plenty for decent chains.
2wd or 4wd ?
Do you have a part # on the Ford accessories tonneau cover? Im trying to locate one but cant find it. Wondering if it was discontinued? Also part # for the bed mat?
www.tccustoms.com/collections/bed-cover-1/products/ford-accessories-hard-tri-fold-bed-cover-2015-2020-f-150-5-5-bed
www.tccustoms.com/products/ford-accessories-bed-mat
@@TCcustoms_ Thank you. I was searching a couple nights on ford accessories website but couldnt find them. Thanks alot.
Do you have any issues with the tonneau cover holding water? I bought a used factory cover for a 6.5' bed that came off a 2015 and it is completely waterlogged and very heavy.
Man that's a good lookin truck, love the 17 models..not so much with the 18's
Looks good
What happens when you have a load in the bed with that leveling kit? Does it negatively effect handling? Would those tires rub without the leveling kit 🤔
Awesome vid
Thanks man!
Where did you find the Raptor wheel/tires for sale?
We have some for sale at the dealership. We get them as pull offs from the MegaRaptors
love the mods! nice truck not to over the top 👍
Too
Would the bigger tires fit without the lift kit?
35x? Any trimming?
i want to install this wheels in my xl truck 2015 but id read some forums saying that if i put this wheels im gonna need to change the gear ratios.. any opinion about it?
Do you have any rubbing?
Hey just wondering I have a 2015 F150 with a 2 inch leveling kit do you think the Raptor wheels and tires would still fit ?
Which tonneau cover is that? I haven’t seen one with such a low profile!
That is the "Ford Accessories Tri-Fold Bed Cover" - Love it!
I have a 2013 Ford F150 FX4 Super Cab 5.0L Coyote and running (2020) Raptor Wheels with the LT315/70R17
BF Goodrich All-Terrain T/A KO2's and looking for a 4" lift I can use with this setup. Are there any lifts that will allow you to run the "OEM" 17" wheels? Theses are the +34 offsets. Thanks for any info you can offer!