Это видео недоступно.
Сожалеем об этом.

Woodturning a bowl made of partially decayed wood and epoxy resin

Поделиться
HTML-код
  • Опубликовано: 12 май 2024
  • I made a bowl from partially decayed wood and epoxy resin.
    3 years ago I attached a partially rotten piece of wood to a piece of plywood and roughly made a bowl blank out of it and set it aside to dry.
    I had actually forgotten that I still had this, but when I came across it again, I mounted it on the lathe and made a bowl out of it with some epoxy resin.
    After pouring the epoxy, I removed the air from the wood in a vacuum chamber. The decayed wood has absorbed more epoxy resin than I expected, so the bowl became lower than I expected.
    It was a challenging project to turn, the unaffected wood was very hard, and the pieces of decayed wood very soft because the epoxy resin had not completely saturated everything.
    I finished the bowl with friction polish.
    The bowl has a diameter of 25 centimeters and is 10 centimeters high.

Комментарии • 14

  • @mpart_woodlathe-stuff
    @mpart_woodlathe-stuff 3 месяца назад +2

    Great colors for that wood Hans. No, I take that back ... the colors are perfect !! Take care. -Mike

    • @hbwoodturning17
      @hbwoodturning17  2 месяца назад +1

      Thank you Mike, I am also surprised by the colors, especially that the decayed wood has still remained black despite the red epoxy that I used. Thank you Mike, I am also surprised by the colors, especially that the decayed wood has still remained black despite the red epoxy that I used.👍

  • @marjabeverwijk5630
    @marjabeverwijk5630 3 месяца назад +1

    Mooie kleur acryl en mooie werking van het hout.

    • @hbwoodturning17
      @hbwoodturning17  3 месяца назад

      Dank je wel Marja, het is een mooi kleur combinatie geworden, het vergane hout is ondanks alle rode kleur toch zwart gebleven.

  • @oneturnatatime6309
    @oneturnatatime6309 3 месяца назад +1

    Looks really beautiful Hans. I like the red swirling resin and the dark color of the wood. Well done 👌

    • @hbwoodturning17
      @hbwoodturning17  3 месяца назад

      Thank you Jojo, I was surprised that there were swirls in the epoxy.
      I had it in the vacuum chamber for a long time.
      It had already started to solidify when I removed the vacuum.

  • @WoodenItBeNice
    @WoodenItBeNice 3 месяца назад +1

    Beautiful work as ever Hans.
    Take care my friend.
    Cheers, Huw

  • @ramwoods
    @ramwoods 2 месяца назад +1

    Gorgeous piece. Great job.

  • @WoodenItBeNice
    @WoodenItBeNice 3 месяца назад +2

    1st. I'll watch later Hans

  • @TazioCostantini
    @TazioCostantini 3 месяца назад +1

    Very nice!👋👋👋