woodturning coring spalted birch bowls

Last winter, I cored a piece of spalted birch trunk and then set the bowls aside to dry.
In fact, this is the first time I have used my oneway coring system other than a test piece
I recently mounted the bowls back on the lathe and turned them for the second time.
First I turned tenons on the bowls and then I attached the bowls to the chuck with the tenon and turned and finished the bowls.
After I have finished the bowls, I remove them from the chuck and remove the tenons on the lathe.
When I have removed the tenons, I laser engrave my logo in the bottom, and then I finish the bottoms
I finished the bowls with sealer and then sanded them to 600 grit and finally applied a layer of friction polish and buffed them.
The large bowl has a diameter of 39 centimeters and is 16 centimeters high, the second largest has a diameter of 31 centimeters and is 11 centimeters high, the next one has a diameter of 26 centimeters and is 9 centimeters high and the smallest has a diameter of 19 centimeters and is 6 centimeters high.

[@joeehrlich2898]

Beautiful spaltting! Nice work!

[@hbwoodturning17]

Hello Joe, thank you for watching my video and your reply

[@ramwoods]

Beautiful bowls.

[@hbwoodturning17]

Hello Ram, thank you for watching my video and your reply

[@frankvanderwal4571]

Another great project, Hans. You keep impressing me! Not only by the craftsmanship but also by your equipment and tools. The other day I saw your metal lathe and now the Oneway core tool! Cool stuff!

[@hbwoodturning17]

Thank you Frank, yes this coring system is a really nice piece of tool, I now have the opportunity to make multiple bowls from one piece of wood, which saves wood and a lot of time. That metal lathe belongs to my father, so that is why we made that project together.

[@16bitWoodCrafting]

Nice work

[@hbwoodturning17]

Hello, thank you for watching my video and your reply

[@spindlesworkshop9744]

Nice work man

[@hbwoodturning17]

Hello Luie, thank you for watching my video and your reply

[@emgiwoodworks]

Great to see you also have the OneWay coring tools. Works fine on the MAXI-1.

[@hbwoodturning17]

Thank you Leo, yes it works fine on this lathe, I recently cored a load of cherry wood so I have plenty to do this winter too

[@theangrywoodturner9972]

Beautiful spalting! I too have the oneway and the corepro cutter (expensive but a game changer) good job