woodturning a square platter made of padouk, linden and oak
HTML-код
- Опубликовано: 2 июн 2024
- I made a square platter on my lathe from padouk, linden and oak.
I first sawed the padouk block in half and sawn both halves diagonally, then I glued the linden slats onto the padauk triangles.
When the glue had hardened, I sawed the triangles off at right angles and then glued them to the oak centerpiece.
When the glue has hardened, I mount a faceplate to the wood and attach it to the lathe and start turning the bottom of the platter.
Once I have turned the bottom and provided a recess, I sand it and apply a few coats of sealer.
I then reverse mount the platter with the recess on the chuck and hollow it out.
When I turned and sanded the bowl and gave it a layer of sealer, I noticed that the linden and oak had turned a reddish color due to the padouk sanding dust.
So the next time I sanded, I only sanded the linden and oak and gave it a layer of sealer. After the sealer had hardened, I sanded the padauk and applied it with sealer, and I applied three layers of sealer in this way.
And for the finishing touches, I sanded to 600 grit and finished the platter with friction polish.
The platter has a size of 34 centimeters square and 6 centimeters high. 
Кино
Fantastic and stunningly beautiful
Hello Kobie, thank you for watching my video and your reply, yes it was quite a challenge to make this, but it was totally worth it
Are you Dutch or of Dutch descent?
Beautiful Piece and interesting process. Full View and Like 👍
Hello Allen, thank you for watching my video and your reply
Good job my friend 👍🇵🇹
Hello, thank you my friend, and thank you for watching my video and your reply
Beautiful work!
Hello, thank you for watching my video and your reply
Outstanding piece Hans. Thank you for sharing
Hello Clint, thank you for watching my video and your reply, yes it has become a special platter, gluing and clamping those slanted pieces was a challenge
Very beautiful piece. I really like the shape. Thank you for sharing, I hope you have a wonderful day.
That’s a very nice finish product Hun. Might have to steal it for one of my own. Thanks for heaps for sharing a great video.
Thank you Brett, I'm glad you like it, you are free to make this if you mention that it was my idea😉
@@hbwoodturning17 would always give credit. 🙂
You were right, this one is spectacular ! Well done Hans ! Take care my friend. -Mike
Thank you, Mike, I'm glad you like it, it was still quite a job to saw and glue everything, but I'm happy with the result
Another excellent work Hans 👌 Can't to wait what will You figure out next 💪😃
Cheers.
Thank you Rav, well I still have some projects in progress, but I'm already thinking about future projects (if I can find the time to make them)
@@hbwoodturning17 I have the same issue - lack of time...or I'm getting older, slower, powerless, eh🤷 but still producing new items 💪
Very nice, i wish my lathe was as quiet as yours.
Thank you, yes my lathe doesn't make much noise, in my videos you hear my JSP powercap louder than the lathe
I hate square platters and bowls, EXCEPT this one. It’s simple and beautifully designed. Very nice!
Hello, I'm glad you like it, I make square platters because I waste less wood to make something round from a square piece
@@hbwoodturning17 understandable. It’s just my crooked eyes aesthetic.
Wow,beautiful piece❤, thanks for sharing!
Hello and thank you for watching my video and your reply.
@@hbwoodturning17 Hello,Cheers !
Mooi geworden (ook al is het niet helemaal zoals je vooraf bedacht had)
Dank je wel Marja nee, het gaat niet altijd als gepland, maar dan probeer ik er toch wat van te maken en ik ben blij dat je het leuk vindt.