You can switch to a linear rate spring if you mess with preload since the spring rate will not change with the compression of the spring while preloaded
This was awesome! having friends that can stay with you doing this kind of stuff having a beer test-driving in the morning uhh! pandemic is a shit! New subscriber here!
@@3uzDion when people say bone stock they refer to the engine. Actual performance mods. Therefore it’s still stock. If you want to say it’s not stock cause of some wheels that’s okay buddy but wheels and some cheap ass coilovers aren’t real mods buddy.
@@wilsonrosales6410 if you used your eyes and actually read my previous comment I was implying that I was talking about performance. You can do anything you want to the outside and make it look good but if you don’t do anything with performance it just makes you look like a ricer. Shit boxes with ebay coilovers aren’t builds.
Should have put that $ time and effort into the power plant . Now you have a half a low rider slammed JDM style bone . A Honda fit will drag you and your 18” rims . Thanks for posting
Watched this video on a whim and holy crap your quality is insane. I'm about to start modding my 2000 Civic EX and this video got me readyyyyyyy asf for it lmao
Omfg I was looking for a video to see if preload changes height and I gave up last night and I randomly was watching this video and found my answer you guys are awesome🙌🏼love the car community
The last time I saw one this clean was in the parking lot of a Best Buy it was white lowered on some BBSs with a small chrome peashooter with a slant cut tip. You know side note for those people that think the modern stance build is not innovative enough compared to the old days of totally riced, fully fabbed, sponsored show cars just throwing some wheels coilovers and a wrap on a stock car that probably still has the warranty is called "a build"... This is actually closer to the grassroots Spirit of low riding. Friends and family taking the old family car putting nice wheels on it and dropping it as low as they could get it on a mechanical suspension for as cheap as they could.
@@doublee4930 yes I had to fender roll and 5 degrees of camber because of the 0 offset. I didn't want to at the beginning but once your there might as well go for it.
I love how you staged you're absolutely unique comment. I've never once seen a "Nobody: Not a single soul:" setup ever before on RUclips in the comment section... 😒
Não falo e não entendo english! Mais estes hondas são a perfeição dos carros STANCE e o estilo do momento Atualmente estou montando um Corsa b me inspirando na gringa por montar carros em casa 100% feito por mim Parabéns pelo carro muito top
I've noticed every time I've lowered a car, the front is always a couple inches taller than the back. It's pretty annoying and I've dealt with it with just about every car.
What spring rate are those springs on the coilovers? I’m running 32k in the front and 40k in the rear with bc racing br series extreme low coilovers in my 2010 civic and it’s waaaayyyy too stiff. Any recommendations on spring rates?
Ok I have a question I have a 09 maxima I just got fully ajustable suspension for it and I am about to slam it on it nuts with that said I ain’t big into camber but I want wide wheels so what should I be looking for size wise like 17-18 or what and how wide and what offset to get that fat wheels lip thanks in advance
I had yo use the old shock bolt that holds it in place to put in new shock because new shocks didn't have the build in nut holder luckily the new shocks came with new bolts to hold shock up
I bought a set of candy purple xxrs for my 325ci that cost more than the rims and suspension combined. For someone that’s not on the track they are just fine
And that fender rolling tool I use it all the time on my circle track asphalt outlaw latemodel to roll the wheel openings on the thin aluminum pre colored sheets we get from roofing supply store that we bend cut bead roll and rivet but this roll tool is a game changer in the look to make my cut ots look more smooth I usually just cut sections and bend the tabs around to smooth the openi gs and round them until this the way I was doing it looked great everyone does it that way now they all use the tool for any oval track car body that is aluminum
crazy how you only have 3.7k but the quality in terms of production on this video is really solid
Thanks dude 🤙🏻 3.7k is a lot for me considering I only hit 1k 3 weeks ago lol
@@AlexMelnik only going up from here my guy, keep doing your thing!
6 days later at 6k
Honestly
That's the car I drove in need for speed underground 2
Probably the best stance video I have seen in a very long time. Short and sweet. 👏🏻
Thank you 🙌🏻
This is the kind of camber that I personally like. It's not crazy, and it wont completely destroy the car, and looks dope 🔥🔥
I agree
crazy how wheels and a drop make a car, so many people do cheap ass mods that are so tacky. but this is all you need! clean and simple. looks great
“Cheap ass kids” they put rep wheels. I think that qualifies for cheap shit lol
Lmao. Stance people talking about how some people are tacky.
@demonhydra stance is rice.
@@youtubecomments5951 we do not care old man
@@ceedot2578 ok riceboy
Just woke up at 1 and was wondering, hey how do I stance a car? You the first to pop up. I enjoyed this!
😂😂 thanks!
5 am for me 😄
cap
vv
1.13 am for me
I wish I had friends that could do this for me in 4 hours 😭
DIY
friends?
I would say come to me ill do it for you i work on cars and my own 2 cars
Where u located I have a team does this for fun
You want someone to ruin your car and the way it handles and rides? I'll be right over with a sledgehammer. It'll take me about 60 seconds 👍😑
I'm more impressed with it being 8 pm and still having another hour of daylight 👏
But nice civic. I miss my EF 😔
I would do a little less camber on the rears or get some spacers so it pokes like the front ones but it looks amazing bro
You can switch to a linear rate spring if you mess with preload since the spring rate will not change with the compression of the spring while preloaded
this was fun to watch cause it's only two dudes at the house. the editing for this wrapped it up nicely.
Yo... that little floor jack trick you did was pretty cool, thanks for that!!!
It comes in clutch! Haha
Wow, the older civics don't disappoint!
On the front shocks if you want more low take off 2 of the 3 locking collars, you’ll get another half inch of drop
Miss the being in the Honda game ! 😢, car is looking beautiful! Great job boys 🙌🔥
Она будет крассивой даже спустя 50лет! С сегодняшнего дня! Респект Американцам за любовь к ХОНДЕ!!!
You guys seem hella chill. My kinda peeps I like right here!!! I subbed!!! Great content man.
Thanks a lot bro! 🤝
Dude I could stance a car in 1 minute, "shoots suspension to lower car" see
#GTA5
Lmaoo ong bro
Yea so i just tried that 😒
goat there's different ways to stance just search it
Gta-4
“ let’s jus do this the right way” not a second later “ just send it” 😂😂😂😂😂
Glad you’re back Ik the feeling of starting over done it plenty of times good luck on the build mate!!
This was awesome! having friends that can stay with you doing this kind of stuff having a beer test-driving in the morning uhh! pandemic is a shit! New subscriber here!
This video helped me stance my 2000 honda civic four door hardtop, This video helped a lot!
Damn, car looks fire and the shots are fire!
Damn I wish I had some relatable friends like yours, none of my friends are that interested in cars 😂
“Bone stock to this” *still stock*
yeah
*doesn’t know the definition of stock *
@@3uzDion when people say bone stock they refer to the engine. Actual performance mods. Therefore it’s still stock. If you want to say it’s not stock cause of some wheels that’s okay buddy but wheels and some cheap ass coilovers aren’t real mods buddy.
@@justaturtle6790 did it come with coilovers ? I dont think so, so its not bone stock. Come on man use ur hear for a bit 😂
@@wilsonrosales6410 if you used your eyes and actually read my previous comment I was implying that I was talking about performance. You can do anything you want to the outside and make it look good but if you don’t do anything with performance it just makes you look like a ricer. Shit boxes with ebay coilovers aren’t builds.
bro wtf i thought u were a big youtuber nd i jus checked nd u only have 8k like what u deserve sm more
Drop and wheels make a huge difference
Should have put that $ time and effort into the power plant . Now you have a half a low rider slammed JDM style bone . A Honda fit will drag you and your 18” rims . Thanks for posting
Glad to see some Slavs in the game , good quality videos, keep it up ! Subbed
That civic is clean af, zero rust damn
Nice build! I’ve learned that coilovers will sag over a few days after installing.
Watched this video on a whim and holy crap your quality is insane. I'm about to start modding my 2000 Civic EX and this video got me readyyyyyyy asf for it lmao
Love the build clean and simple🥰
Love this! The guy is super humble!
You just made your life a whole lot more complicated but you gon look cool living it 😎
Now this.. is both entertaining and informative. Sweet!
"Send it!"
*sends oil pan into speed bump*
Ah the car life💀
@@trendyuchiha2093 *stance life
Omfg I was looking for a video to see if preload changes height and I gave up last night and I randomly was watching this video and found my answer you guys are awesome🙌🏼love the car community
The last time I saw one this clean was in the parking lot of a Best Buy it was white lowered on some BBSs with a small chrome peashooter with a slant cut tip.
You know side note for those people that think the modern stance build is not innovative enough compared to the old days of totally riced, fully fabbed, sponsored show cars just throwing some wheels coilovers and a wrap on a stock car that probably still has the warranty is called "a build"... This is actually closer to the grassroots Spirit of low riding.
Friends and family taking the old family car putting nice wheels on it and dropping it as low as they could get it on a mechanical suspension for as cheap as they could.
Remember when you were at 1k subscribers now your at 23.8k good times brother, Love from Far north kaitaia New Zealand brother 🤝💯
Yessir! Thanks bro 🙌🏻
I'm 37 years old and just stanced my 2000 accord se after years lol. 15x8 jnc 003s
With godspeed coilovers. They look soo nice when they sit low.
Nice!
Did u just use coilovers or did u have camber kits and stuff
@@doublee4930 yes I had to fender roll and 5 degrees of camber because of the 0 offset. I didn't want to at the beginning but once your there might as well go for it.
@@cledesma135 fuck....I gotta find someone who can actually roll fenders never did it on a car before
Hearing Lupe Fiasco in the beginning of the video made me feel like it was Goanna be a good video 😊
Are we going to get and update on this ride?!
i’ve never seen any of your videos but this was definitely a banger
🙌🏻🙌🏻
🔥🔥 son. Thanks for posting fam.
My 2 Favorite versions of civic is the 6th gen with 5th gen tail lights and the EK Hatchback
God I wish I had friends that could do this to my Bimmer in 4 hours dam 😂
Do it yourself bro it’s not hard
Here I am, a minor, without a car, watching a video tutorial for how to stance your car
i just found your channel, subbed and notifications on! cant wait to see this channel grow! you’ll get there my man!
Wow, thanks man! 🤝
Big love from Pakistan
This guy nice with a good heart and thinking about Neighbours
This videos was tuff ash🔥🔥
It looks so clean
oh!! cool!! sports compact
最高に格好いいシビックになりましたね
Subscribed for the clean ek clip with Lupe.
Nobody:
Not even a Single soul:
Alex: we not about that bacon life Lmao haha😂
😂😂
I love how you staged you're absolutely unique comment. I've never once seen a
"Nobody:
Not a single soul:"
setup ever before on RUclips in the comment section... 😒
Still my favorite video!!! You need to do more like this!!!
Big man 🙌🙌🙌 you earned a new subscroiyber, like you content really chill and nice, on the other hand i learn ✨the more we learn✨
Thank you bro 🙏🏻
I just recently got a 94 civic ex and I’m probably gonna go the stance route this summer when I start working more, I can’t wait for it tho
Não falo e não entendo english!
Mais estes hondas são a perfeição dos carros
STANCE e o estilo do momento
Atualmente estou montando um Corsa b me inspirando na gringa por montar carros em casa
100% feito por mim
Parabéns pelo carro muito top
Força aí irmão, espero que tenhas conseguido rsrs
I'm rebuilding my everything currently. I've had the same coilovers since before the rebuild. Accord 96
You "can" take out two of the three collars left on those front struts for another inch or so drop.
I can relate to this neighbor thing, I love to work late at night, I don't know why, I can't sleep without finishing what I started.
I've noticed every time I've lowered a car, the front is always a couple inches taller than the back. It's pretty annoying and I've dealt with it with just about every car.
Opposite for mine lol
Even with air lift suspension?
You're doing something wrong then
Im on coils with a civic si fg4
find a kit for it, usually 1500 or 2500 maybe? just PnP and u can enjoy scratching ur lower body lol
in swedn we have getto coilovers. We take the whole spring out of the shock
I wish I could find an Ek coupe that clean 😢
Hi friends saludos desde Ecuador una consulta que medidas de rines y llantas le pusiste al civic gracias
wish i had a friend like this guy haha
It went from a perfectly fine civic to a POS.
Good job
Nice video... Say hello from Indonesia 🤙🏻 keep Honda and Stance 🥂
Hello! Thank you 🙌🏻
Get top hats to save the struts! Reset preload
Definitely coming back for more content keep up the good work bro 💯
Swap more wider lips or minus offset BBS RS and more camber in the rear that gonna be more badass bruh🔥
This video taught me a lot yo thanks
I didn’t remember that good song, nice work 😎
My Projekt Starts from now!
Projekt: *slamming my moms hybrid Prius in 12 minute...*
just subbed cant wait to see this channel in the future
Appreciate that!
I’m not really a Honda guy this bittttt clean
What spring rate are those springs on the coilovers? I’m running 32k in the front and 40k in the rear with bc racing br series extreme low coilovers in my 2010 civic and it’s waaaayyyy too stiff. Any recommendations on spring rates?
Try some 16k - 14k
holy shit man 40k that’s pretty stiff 😂
Ok I have a question I have a 09 maxima I just got fully ajustable suspension for it and I am about to slam it on it nuts with that said I ain’t big into camber but I want wide wheels so what should I be looking for size wise like 17-18 or what and how wide and what offset to get that fat wheels lip thanks in advance
How to make daily driving more inconvenient..
What size are the wheels and the offset
Whats the wheel specs and tire?
16x9 +0 195/40
What wheels are these???
I had yo use the old shock bolt that holds it in place to put in new shock because new shocks didn't have the build in nut holder luckily the new shocks came with new bolts to hold shock up
you should've taken a photoshoot with only one side stanced lmao
This is really dope!! I have a Hyundai Veloster I want to drop it n throw rims n some bass not sure about the rims might just plastic dip them 🤷🏽♂️🤔🤔
I dont even think about the friends to help me do this i wish i had the money 😂 my hatchback would look so freaking good with an uograde 🚗
Just subscribed, very underrated channel man keep it up. 🤙🏽
Thanks bro, appreciate the comment 🤙🏻
@@AlexMelnik all love bro 🙏🏽
$2k?! Sheeshhh I never bought anything brand new before 😅 I woulda FB Marketplaced everything for less then half that price lol
Stg
where do you guys buy your wheels from, im looking to get theese
Can’t believe this only took 12 mins
It took like 5+ hours lol he says that in the video
I bought a set of candy purple xxrs for my 325ci that cost more than the rims and suspension combined. For someone that’s not on the track they are just fine
“Stance”=just slam it to the ground💀
Ur definition of low and mine are totally different 😂
bibleeee
S.I.R front lip is the cleanest look for civics
How to ruin your ride in a jiffy 👌🤣
Very nice super clean Honda Civic bro you ever think about doing any upgrades on your vehicle rims tinted windows black lenses black headlights
imagine ruining a stock civic
Great job fellas 🤟🏾
Wow jim for the office changed alot lolzz
I love people that put the specs in the description
🙌🏻💙
And that fender rolling tool I use it all the time on my circle track asphalt outlaw latemodel to roll the wheel openings on the thin aluminum pre colored sheets we get from roofing supply store that we bend cut bead roll and rivet but this roll tool is a game changer in the look to make my cut ots look more smooth I usually just cut sections and bend the tabs around to smooth the openi gs and round them until this the way I was doing it looked great everyone does it that way now they all use the tool for any oval track car body that is aluminum
nice modification nice conten nice editing..soo perfect👍