Hey again Bob! The suggestion of switching the motor wires corrected the problem of the reverse signal! Should have thought of that myself! Thank you again!😁
Press and hold the - negative button for 3 seconds to cycle through all the sounds it has in it. there is many engine sounds and there is one perfect for that truck. just press and hold the negative button for 3 seconds to change to the next sound until you find the one you like.
Thank you, thank you, thank you......I'm so glad I waited for your HEMETT video!!!!! Sorry to see that your roof light bar isn't operating as designed.......hope you get it fixed soon. Having watched your video I won't bother with the sound kit.......it's headed for the trash heap as I type. Thanx for the heads up regarding the tail light short caused by the metal bumper.....I'll be sure to remedy that headache. I haven't tackled anything like this in a long, long time.......I'll try not to screw it up........wish me luck......I always have a terrible time losing screws!!!! I'm going try something I did on a RTR truck years back involving using aquarium air stone tubing I split down the middle to hide some of that wiring. I use black air stone tubing that looks great on the truck. Your videos are so helpful and inspirational......thanks again!!!!
Look forward to seeing that, which we will then also get to see if the years are plastic or pot metal, which either is fine, as it is not a stadium truck... thank you. As per taking the axle appart
yes. he showed it worked in the video . but he didn't like that particular sound. he obviously didN't know that they come with other sounds models and absolutely did Not know how to change them. there is like 18 wheel big rig. race car. heavy equipment and so one.
I agree on the atrocious sound system. What was who thinking>>> Re. the roof lights...personally it would be amber (orange) or nothing. Great narration and video!
Thanks for the recent tip regarding low or flatbed trailer options, it helped. I'm an early entry to the world of RC modeling and much to learn. However, I consider myself quite apt with internet search options and for the life of me can't find the lighting and sound upgrades for the HG P801/2. I even tried reading the labels on the packaging you held up in your video but to no avail. Help?
Hey guy, you can find it on Ebay. That's where I purchased the sound and light kit from. HG RC DIY Parts LED Light Set for 1/12 2.4G P801 P802 8*8 Military Truck Car & HG Sounds System With Loudspeaker for RC P802 Truck Model DIY Car Electric Parts. Have fun...
Quick question, can the different lighting modes on the Light strip be made to be controlled by the remote? I mean without someone reaching inside the cab to switch them to different modes? I mean do you think it can be modified to do that?
Nice update on the truck. The lights don't look to bad, the top becon light would look better flashing. Have you tryed adding a trailer? I am thinking of getting this model but not sure how a tamiya trailer would look and fit.
Hello great video by the way it helps me out a lot. But I’m thinking is the sound system like real sense RC audio where you can download different sounds?
Do you think there is enough room to put the Beier SFR1 underneath the speaker? Where you put the sound and light module? With some modification for the wires and the USB cable?
after seeing your video I took the P802 from GeekBuying paying € 490.00 and then I bought on ebay the kit lights and sounds and I still have to mount them: go ahead you, so I will try not to make mistakes😁
I bought them both p801/p802 thanks too you lol..When ordering the p802 they showed in stock but day or so later no updates.. THey then said out of stock.. No biggy I'll wait already paid for it and the p801 should be here real soon 8-)
andicog , they are a bit 'long with the time of departure of the package since you paid (absolutely Paypal !!!). If after 7 days the package has not left, do as I do: a phone call to Paypal, and in 12 days total the Truck has arrived perfect.😉👍
andicog , it's beautiful: having said this, I have not tried it yet on the ground, and I think I will never do it because it's too much, too beautiful; ... and heavy💪👍😁🏁
Hi, I recently purchased the 1/12 HG 802 HEMTT and started to install the light kit and speaker. Well several things went wrong. 1. either the lights stay on or blinks constantly, 2. for some reason my transmitter is not working now with the truck, the transmitter lights are flashing red and green. I need help cause I'm starting to get really frustrated. I watched several of your videos and I must say they are really good. Thank you and I look forward to hearing from you. Joe
Sounds like the radio need to be re-bound to the receiver. Take a look at a few you tube videos on radio binding. Also make sure the transmitter has good batteries. The lights have several modes changed by the push button switch inside the cab.
Can you give advise to me what to do my hemmtt dont move forward and reverse but the sound and lights work ,sometime its work sometime doesnt work. Dont know whats the problem.
I just added the sound and light equipment on mine last night. Looks like everything works ok. I'm glad I came here because I forgot about the button to change the light sequence for the strobes. I have a 10 channel RC/reciever to use for this, I'd like to have the lights on a channel so I can turn them on and off. I also bought some extra off road light for it too. But the way this is set up I don't know how I'll be able to put those on there own channel. Plus just how to hook up the basic functions for turning, forward and reverse. Anybody have an idea?
Hello do you have a video with more detail on connecting sounds and lights for this truck I having issues with the instructions I can get the sound and just the dome and bar lights come on
i am dying to see your upgrades on this hemtt......i am an avid collector of lionel trains but this video has me going in a totally different direction .....i think i just caught another i got to have one sickness if you know what i mean lol lol im a 52 yr old kid lol lol
I installed a 1/10 SCX10 tow hook/chain and I snapped the head off one of the hook bracket bolts..........dang!!!!!! It's gonna stay that way for now because I can't just stop everything when I screw up, otherwise, I'll never finish what I need to get done!!!!! So, forward I march right into a desert sand paint job for the fifth wheel dolly!!!! The light install will come later.......much later!!!!!
How are you friend? I would, if possible, make available the link of the sound module (or item name) used in the video. I thank the attention. Greetings from Brazil. Ricardo Fernandes #ManikakaAirModels
Hi! I have the Heng Long 8x8 Hemett like yours. It has the factory installed lights & sound system. When I go forward the reverse alarm goes off & when I go backward the alarm doesn’t go off. Could it be something wired wrong from the factory or a radio adjustment. Thank you for your reply!
I highly suspect that HG packaged a police car light set as the HEMTT set. The cab brow lights should be amber and the dome light, which the truck doesn't actually have normally, should be on a switch. You would be better off kitbashing a Tamiya MFC into it.
@@HobbyconceptsLLC are you guys still in business?? I went to look at your product page and I got no response. Just wondering if I went on the right page. I went to hobbyconcepts-LLC. Just asking
There are other videos with this same sound module that sound much better (ruclips.net/video/x0gA-x7pM7U/видео.html) or (ruclips.net/video/GAETu8ALF_o/видео.html) I think you may have received a dud, I would contact the company to get a replacement or a re-flash of the software for the unit.
As mentioned by others this sound system includes several engine types and you can switch between them by pressing a button: Bob, you should give this system another chance and show us how to select a different mode, please! Besides, why don't you have it with the same color of the body? The green one can fit inside the green truck and on this tractor you should have the sand colored one... As always I truly enjoy seeing you operate on a new project and I also like your models' choices! Cheers
I'm not sure what you do with a model like this, as a static display with all details painted and trimmed, I get it, but driving it? a crawler can present skills challenge and outdoor exercise, but after you run this around the driveway once, then what?
Хобби
Hey again Bob! The suggestion of switching the motor wires corrected the problem of the reverse signal! Should have thought of that myself! Thank you again!😁
Press and hold the - negative button for 3 seconds to cycle through all the sounds it has in it. there is many engine sounds and there is one perfect for that truck. just press and hold the negative button for 3 seconds to change to the next sound until you find the one you like.
what is the negative button?
@@pedullabass this -
Thank you, thank you, thank you......I'm so glad I waited for your HEMETT video!!!!! Sorry to see that your roof light bar isn't operating as designed.......hope you get it fixed soon. Having watched your video I won't bother with the sound kit.......it's headed for the trash heap as I type. Thanx for the heads up regarding the tail light short caused by the metal bumper.....I'll be sure to remedy that headache. I haven't tackled anything like this in a long, long time.......I'll try not to screw it up........wish me luck......I always have a terrible time losing screws!!!! I'm going try something I did on a RTR truck years back involving using aquarium air stone tubing I split down the middle to hide some of that wiring. I use black air stone tubing that looks great on the truck. Your videos are so helpful and inspirational......thanks again!!!!
Look forward to seeing that, which we will then also get to see if the years are plastic or pot metal, which either is fine, as it is not a stadium truck... thank you. As per taking the axle appart
Gute Anleitung,da kann ja nix mehr schiefgehen.Danke.
pretty gooood! Heng Guan is well-designed.
Very fine! Greetings from Germany
Hi! to change the "engine" sound, you must press "-" for three seconds: you will alternate a different program every three seconds.
exact. yes you can change the sound.
So the HG sound system works then?
yes. he showed it worked in the video . but he didn't like that particular sound. he obviously didN't know that they come with other sounds models and absolutely did Not know how to change them. there is like 18 wheel big rig. race car. heavy equipment and so one.
@@1peanut So does it have an exact sound that fit this Cat engine Hemitt?
@@richarddaly9018 This truck had V8 Detroit Diesel Engine so it would need the sound of a V8 2 Stroke Diesel Engine
the manual is indeed hard to read. Thanks a lot for posting the video, it really helped!
I agree on the atrocious sound system. What was who thinking>>> Re. the roof lights...personally it would be amber (orange) or nothing. Great narration and video!
Thanks for the recent tip regarding low or flatbed trailer options, it helped. I'm an early entry to the world of RC modeling and much to learn. However, I consider myself quite apt with internet search options and for the life of me can't find the lighting and sound upgrades for the HG P801/2. I even tried reading the labels on the packaging you held up in your video but to no avail. Help?
Hey guy, you can find it on Ebay. That's where I purchased the sound and light kit from. HG RC DIY Parts LED Light Set for 1/12 2.4G P801 P802 8*8 Military Truck Car & HG Sounds System With Loudspeaker for RC P802 Truck Model DIY Car Electric Parts. Have fun...
Quick question, can the different lighting modes on the Light strip be made to be controlled by the remote? I mean without someone reaching inside the cab to switch them to different modes? I mean do you think it can be modified to do that?
nice my bri video good
Nice update on the truck. The lights don't look to bad, the top becon light would look better flashing. Have you tryed adding a trailer? I am thinking of getting this model but not sure how a tamiya trailer would look and fit.
Watch my next HEMTT video. I will talk about the trailer I want to build.
Awesome!! I just subbed
very cool
Love the Pimple Faced Teenager Line Bob
Did you get the beacon on cab roof to flash
Did you solve the sound module issue? If not what other type of sound module can you use on this? Servonaut?
I am going to use the speaker but will replace the module with a GT Power sound unit. Will show it in an upcoming painting/detailing video.
Hello great video by the way it helps me out a lot. But I’m thinking is the sound system like real sense RC audio where you can download different sounds?
No, I am going to be upgrading this with paint, new sound system and more soon.
Do you think there is enough room to put the Beier SFR1 underneath the speaker? Where you put the sound and light module? With some modification for the wires and the USB cable?
I don't think so the fit is very tight in there.
I have another question a good price this in truck version… But is there a kit to convert to the toe truck version so I can add the trailer?
after seeing your video I took the P802 from GeekBuying paying € 490.00 and then I bought on ebay the kit lights and sounds and I still have to mount them: go ahead you, so I will try not to make mistakes😁
I bought them both p801/p802 thanks too you lol..When ordering the p802 they showed in stock but day or so later no updates.. THey then said out of stock.. No biggy I'll wait already paid for it and the p801 should be here real soon 8-)
I've been tempted to buy from Geekbuying as their price is really good, did you have any problems with them?
andicog , they are a bit 'long with the time of departure of the package since you paid (absolutely Paypal !!!). If after 7 days the package has not left, do as I do: a phone call to Paypal, and in 12 days total the Truck has arrived perfect.😉👍
@@motoacquatico1967 Thanks, love this truck, take it your happy?
andicog , it's beautiful: having said this, I have not tried it yet on the ground, and I think I will never do it because it's too much, too beautiful; ... and heavy💪👍😁🏁
Hi, I recently purchased the 1/12 HG 802 HEMTT and started to install the light kit and speaker. Well several things went wrong. 1. either the lights stay on or blinks constantly, 2. for some reason my transmitter is not working now with the truck, the transmitter lights are flashing red and green. I need help cause I'm starting to get really frustrated. I watched several of your videos and I must say they are really good. Thank you and I look forward to hearing from you.
Joe
Sounds like the radio need to be re-bound to the receiver. Take a look at a few you tube videos on radio binding. Also make sure the transmitter has good batteries. The lights have several modes changed by the push button switch inside the cab.
Thanks for the tip, will do.
Can you give advise to me what to do my hemmtt dont move forward and reverse but the sound and lights work ,sometime its work sometime doesnt work. Dont know whats the problem.
Ive just ordered one of these, can i use my own transmitter and reciever as i dont like the pistol grip radio
Should be no problem. I am planning to change mine to a stick radio.
Kevin Mason.
Where have you ordered yours from, I'm considering one my self.
I just added the sound and light equipment on mine last night. Looks like everything works ok. I'm glad I came here because I forgot about the button to change the light sequence for the strobes. I have a 10 channel RC/reciever to use for this, I'd like to have the lights on a channel so I can turn them on and off. I also bought some extra off road light for it too. But the way this is set up I don't know how I'll be able to put those on there own channel. Plus just how to hook up the basic functions for turning, forward and reverse. Anybody have an idea?
I am going to re-do all the lights and sound on mine. Will make a video when I do.
Hi what Manufacturer was the light and sound system? I can find it
That was HG's light and sound. You should find them on eBay or Bangood.
Update… the sound system and rx/tx are totally different now(11/21) no more fighting and sounds are changeable
Hi. My light instructions manual show a 16 channel receiver. Do you need that to install the light.
Morten
You can add the sounds and lights with any radio.
Can you provide us a link to where you bought the lights set?
Links in video description
Can someone tell me whats the meaning of blinking light on the remote red and green blinking together.thanks
Hello do you have a video with more detail on connecting sounds and lights for this truck I having issues with the instructions I can get the sound and just the dome and bar lights come on
I have installed everything as you have been told. But the turn signal does not work How do I fix it?
18:52 defective light bar can you replace just that part separately?
yes,
Think you can select the different sound type, this is like the drift car sound..
Where can you buy the HG Models sound and light kit?
I got mine on eBay.
i am dying to see your upgrades on this hemtt......i am an avid collector of lionel trains but this video has me going in a totally different direction .....i think i just caught another i got to have one sickness if you know what i mean lol lol im a 52 yr old kid lol lol
Hello. I have the HG P408 but I am unable to install the Lighting and Sound Kit. Do you have the installation video tutorial?
do not have one of those...
I installed a 1/10 SCX10 tow hook/chain and I snapped the head off one of the hook bracket bolts..........dang!!!!!! It's gonna stay that way for now because I can't just stop everything when I screw up, otherwise, I'll never finish what I need to get done!!!!! So, forward I march right into a desert sand paint job for the fifth wheel dolly!!!! The light install will come later.......much later!!!!!
How are you friend? I would, if possible, make available the link of the sound module (or item name) used in the video. I thank the attention. Greetings from Brazil.
Ricardo Fernandes
#ManikakaAirModels
I need the discription of the Light modul
Hello any way how to lock the diffs front /rear Thanks in advanced
Where did you buy this stuff from?
eBay
Int there a button on the sound kit to change the sound for it
There is (discovered this later). Plan on an update video soon that will include repainting.
😀😉👍
Can someone post link for light kit and sound kit on ebay? I couldn´t find it.
Here is a link: www.ebay.com/itm/HG-RC-DIY-Parts-LED-Light-Set-for-1-12-2-4G-P801-P802-8-8-Military-Truck-Car/223290305015
@@HobbyconceptsLLC Thanks a lot ;)
Do you have a video for wiring the p408
1/12HGp803 8x8 cran??
Mack R600 RC newray y de revell y Volvo globetrotter
i canged my original receiver to a flysky receiver.. soundbox does not play the sunds anymore, only hiss sound.
I know this might seem like an odd question but would a 6-inch action figure fit inside the cab ?
Hi! I have the Heng Long 8x8 Hemett like yours. It has the factory installed lights & sound system. When I go forward the reverse alarm goes off & when I go backward the alarm doesn’t go off. Could it be something wired wrong from the factory or a radio adjustment. Thank you for your reply!
I have the Dump-truck...But i dont understand the control
I highly suspect that HG packaged a police car light set as the HEMTT set. The cab brow lights should be amber and the dome light, which the truck doesn't actually have normally, should be on a switch. You would be better off kitbashing a Tamiya MFC into it.
Actually one of these days will get a proper Beier sound and light system, new 18 channel radio, new paint and the crane.
The sound system must be programble, try to play with it..
I wish it was but sadly it is not.
@@HobbyconceptsLLC are you guys still in business?? I went to look at your product page and I got no response. Just wondering if I went on the right page. I went to hobbyconcepts-LLC. Just asking
@@HobbyconceptsLLC Did you try holding the "-" key for 3 sec like someone suggested?
There are other videos with this same sound module that sound much better (ruclips.net/video/x0gA-x7pM7U/видео.html) or (ruclips.net/video/GAETu8ALF_o/видео.html)
I think you may have received a dud, I would contact the company to get a replacement or a re-flash of the software for the unit.
I am with you on the sound, horrible, you either maybe got a wrong module or they really, really screwed up on this one.
This video is a perfect example y I rather buy it wit sounds and lights n not go thru this headache!!
pimple face teenager lol have you found anything else to a sound unit lol that was funny hearing that blow off of the turbo
You would think for the price of this thing the sound would be something close to a diesel engine . Maybe there is something wrong with the box!
Sadly that is the sound.
As mentioned by others this sound system includes several engine types and you can switch between them by pressing a button: Bob, you should give this system another chance and show us how to select a different mode, please! Besides, why don't you have it with the same color of the body? The green one can fit inside the green truck and on this tractor you should have the sand colored one...
As always I truly enjoy seeing you operate on a new project and I also like your models' choices!
Cheers
The discription of the Model iss e little bit to short. ..I dont understand
the speaker will eat some dirt lol lol
Sorry for my bad english 🤓
That sounds nothing like the sound system in my preinstalled HG P802.
I was a truck driver iij n the military an 88M and I was in a PLS unit and that truck is not a HEMTT that is a PLS
I'm not sure what you do with a model like this, as a static display with all details painted and trimmed, I get it, but driving it? a crawler can present skills challenge and outdoor exercise, but after you run this around the driveway once, then what?
I muted my sound when you tried the sound. That was do rotten I can't say anything but it is crap
하지도 못하면서 리뷰질은
I have installed everything as you have been told. But the turn signal does not work How do I fix it?