Air powered floor jack, from Vevor!!

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 53

  • @lights80088
    @lights80088 6 дней назад +1

    Great video, thank you. Going to go buy one.

  • @Bert-e9p
    @Bert-e9p Месяц назад +1

    Spring is for bottom of handle for hose so that hose does not kink around long bolt.

  • @thepubliceye
    @thepubliceye Год назад +2

    I love mine, I put it together the way it was supposed to be with the control valves protected by the handle. Also I used the protective steel spring over the tubing that came with it, mine even came with the smallest roll of teflon tape I've ever seen.

  • @tyjosan2068
    @tyjosan2068 Год назад +4

    Could always weld some supports and hinges to expand the base to give it more stability

  • @louiecampbell8227
    @louiecampbell8227 Год назад +4

    “Vevor”… definitely a man’s church.

  • @HiTechMom
    @HiTechMom Год назад +1

    Thank you

  • @GreaseMonkey-dq2dk
    @GreaseMonkey-dq2dk Год назад +2

    Literally a jack of all trades! 😂

  • @1crussell
    @1crussell Год назад +2

    I have one without the handle, made a fitting with the Schrader valve to put in my enclosed trailer and use a portable air compressor. I had a friend get a flat tire on his enclosed trailer and worked awesome.

    • @bobbyz7736
      @bobbyz7736 9 дней назад

      That is a great idea.

  • @phillipmoody710
    @phillipmoody710 Год назад +2

    Nice chucks

    • @dansproshop
      @dansproshop  Год назад +1

      Lol. Thanks!! I refuse to grow up all the way

    • @phillipmoody710
      @phillipmoody710 Год назад

      @@dansproshop I think my age tricks people into thinking I'm an adult.

  • @jordanmcshannon8458
    @jordanmcshannon8458 2 месяца назад +1

    The spring was probably for the bent section of tubing to help prevent it from kinking

  • @CAROLDDISCOVER-2025
    @CAROLDDISCOVER-2025 Год назад +1

    Jack stands. Hey I remember blister bags back in the '80s. Also we had blistered bags that we're used to recover vehicles at left the roadways. Read during that time of life I work for Uncle Sam and he had a big-budget can buy these things.

  • @Xillshot
    @Xillshot Год назад +2

    i know this is a bit of an old video but ive been watching your shorts for a while and am a industrial tech myself. love your videos and congrats on the newborn my man :)

    • @dansproshop
      @dansproshop  Год назад

      Thank you so much! Not so new born anymore. He’s 1 now. Time sure moves

  • @VanKeurenpyrotechnics
    @VanKeurenpyrotechnics Год назад +5

    Nice video man

  • @donavonbaker5172
    @donavonbaker5172 Год назад +1

    Dan man i live in rocks too. I built skid plates for our floor jacks and plates for jack stands

  • @rocketrambo20
    @rocketrambo20 Год назад +2

    i wouldnt even trust a regular jack. i think this pair with nice jack stands is gonna be perfect

  • @charlesspidell1447
    @charlesspidell1447 Год назад +1

    Spring on tube

  • @danjohnson8170
    @danjohnson8170 Год назад +2

    Vevor: The Outlet Store for Chinese Prison Camps!

  • @mattmcfadden5847
    @mattmcfadden5847 Год назад +3

    I wonder if that spring was to prevent the hose from kinking on the bolt at the bottom?

    • @dansproshop
      @dansproshop  Год назад

      I have no idea, but honestly I like this way better anyway...thanks for the comment!

    • @Megalixer84
      @Megalixer84 11 месяцев назад

      I think the spring is for the release valve. So it can't be accidentally knocked open

    • @RogerMorin-qq8py
      @RogerMorin-qq8py 2 месяца назад

      The spring is used at bottom of handle, the hose is snaked through spring thus preventing hose from kinking and chaffing the hose.​@Megalixer84

  • @resurrectedhuman9800
    @resurrectedhuman9800 8 месяцев назад +1

    Great video Brother! Mine didn’t come with a spring and the lower handle assembly has the same cutout as the top handle. Assuming they improved the design to reduce hose pinching issues. I don’t know why they included instructions; They don’t even meet IKEA’s standards 😂

  • @ItsMeGiga
    @ItsMeGiga Год назад +1

    I wonder how well it does to lift half way under one of your tires on the trailer with the bike loaded? To get a jack underneath so you can swap a tire. I'd love to see how well it works on a power tank for offroad applications

  • @jacobyspurnger8488
    @jacobyspurnger8488 Год назад +1

    10:50 why not flip the bracket around so the cutout notch is where the bracket is pinching the hose?

  • @DavidWeinberg-cm9xd
    @DavidWeinberg-cm9xd Год назад +1

    Just before you said you were not liking something, I already noticed it a second prior? The pinch point of the hose, from moving the indexing handle? Surgical rubber hose, was partially engineered, so it won't get crushed, if it was a hard plastic hose?

  • @glenherbert7606
    @glenherbert7606 Год назад

    Remember that kids are little germ farms.
    But, we all love them anyways

  • @tampadad
    @tampadad Год назад +2

    Could this theory be adapted to use a car’s or truck’s exhaust instead of compressed air?

  • @bigredjohnson6921
    @bigredjohnson6921 3 месяца назад +1

    Spring goes over the air line that goes around that bolt you replaced. Just saying.

  • @HiTechMom
    @HiTechMom Год назад +1

    Are you able to do an updated review of this product? I am wondering if you still use it.

    • @dansproshop
      @dansproshop  Год назад +1

      I sure do! Not every day, but I do use it. No problems to report yet!

  • @DavidWeinberg-cm9xd
    @DavidWeinberg-cm9xd Год назад

    They, if your worried about the hose wearing on the hex bolt edges, just replace those 2 bolt assemblies, with 2 carriage bolt assemblies?

  • @DavidWeinberg-cm9xd
    @DavidWeinberg-cm9xd Год назад +1

    Is the dump valve a sintered bronze unit, or just a plastic cap covering the top? Sad, when you have to make on the fly engineering upgrades to something, that can potentially lift that kind of weight? LOL.

    • @dansproshop
      @dansproshop  Год назад

      its has a brass pneumatic muffler

  • @DavidWeinberg-cm9xd
    @DavidWeinberg-cm9xd Год назад +1

    My 4 Ton Craftsman jack weighs like 132lbs.? Almost as much as me? Not a fan of the 1 1/4 Ton aluminum floor jacks, had one fail before? Only issue with the air jack, is how tall it is retracted?

    • @dansproshop
      @dansproshop  Год назад

      its about 5'' all the way retracted. Probably wouldn't be practical for most passenger cars. This is definitely a truck jack.

  • @brianpiper3188
    @brianpiper3188 Год назад

    19:56 You're a Proctologist, I'm a Gynecologist! 😆

  • @chrisallen2005
    @chrisallen2005 Год назад

    Speed and simplicity. What are you talking about?

  • @dcmcdougall63
    @dcmcdougall63 10 месяцев назад

    I guess, you have never looked at the assembly instructions !! LOL
    Operation instructions are different !

  • @robertthrem3382
    @robertthrem3382 3 дня назад

    CO2 next to a baby😂 give me a heater with an exhaust vent

  • @donavonbaker5172
    @donavonbaker5172 Год назад +2

    The spring went over bolt you replaced