This is the number one problem of Cummins 2007/2024 6.7L diesel engines. I have to replace these actuators all the time and sometimes just do a complete vgt turbo delete ‼️🔥🔥
Yup make sure the actuator arm moves freely when the actuator is removed….if the shaft can’t be moved by finger pressure then the turbo need to be replaced or rebuilt
@@DIYKAI it don't on the end that connects to the vehicle. It has those 2 prongs that don't fit it. I have a 18 so I don't even need the adapter,just swap the actuator and pug in. Still not doing anything
Mine is coming in later this evening. About to run and grab 3 gallons if coolant and get to draining it. Hopefully this one works out the box so I can get back on the road making money tomorrow
@@fuentedevida1866 my gallons are not stock I have a Mishimoto radi......you dont need to drain the whole system to change the actuator. we use : amzn.to/4cx7LXy
@@DIYKAI i took it off and checked everything and even left it off but plugged in,still nothing moving at all. So I figured it was dead out thr box. But it wasn't the one from what you ordered it was one by misakomo. Im returning that one and getting the one you got
@@DIYKAI all lights came on for a few seconds then just bottom red one was on. Pressed thr button and green light blinked and nothing was moving or programming in thr actuator or turbo.
This is the number one problem of Cummins 2007/2024 6.7L diesel engines. I have to replace these actuators all the time and sometimes just do a complete vgt turbo delete ‼️🔥🔥
I rebuilt mine LOL
@@DIYKAI awesome brother 🔥🔥‼️🎯
Just wondering if that is still working and about how many miles you got out of it so far.
Thanks , good video !
Hello yup still working fine just drove it this morning probably over 5 k miles on it
Any thoughts on City Diesel actuators
Im thibking about doing this myself to my 18 megacab. Code u010c is on and i cant see paying 2900 for a oem one and a coolant flush
Thank you so much body for all information ...
Your welcome
Do you have a link to the one you bought. I ordered one this morning and want to know if it will come with the harness for the 2012.
Sorry, just saw the description
No worries yes it’s in the description
Does a bad turbo actuator cause problems with the DPF or is it the other way around?
What’s problems or codes do you have
@@DIYKAI 641
Yup make sure the actuator arm moves freely when the actuator is removed….if the shaft can’t be moved by finger pressure then the turbo need to be replaced or rebuilt
@@DIYKAI thanks
@taxfree4603 your welcome
I bought the same actuator but I can’t get it to calibrate with the tool it came with.
@@BEOjab sometimes it takes a few tries
Having issues with my turbo wanted to know if yours is still going strong ?
@@Wowtryit yup went cross country and up and down the east coast twice
@@DIYKAI hell yeah man I appreciate your videos and you messaging back so fast. You have a blessed day man and a amazing week
@@Wowtryit thanks! You as well! Any other questions just comment back and I will try to answer them for you
@@DIYKAI thank you man enjoy the rest of your day
@Wowtryit 🙏 you as well!
Still working? Just ordered this one for my 2015 gonna install it when the rain stops.
Still doing great a few thousand miles now
What codes did you actually get? P#### ??????
I have a 2014 i ordered 5494878RX actuator on Amazon without the harnesses will it work
yes it should that's for a 13 & up
I do have 1 question. How did you install the adapter wire? I just got the new one in and just screwed it down and plugged it up,still nothing
It should just plug in
@@DIYKAI it don't on the end that connects to the vehicle. It has those 2 prongs that don't fit it. I have a 18 so I don't even need the adapter,just swap the actuator and pug in. Still not doing anything
@howardpaxtonjr5071 oh got ya not sure why your having a problem?
Btw. Is yours holding up with you towing? I do thr same with mine and need to get back on the road.
Still holding strong ZERO issues
Mine is coming in later this evening. About to run and grab 3 gallons if coolant and get to draining it. Hopefully this one works out the box so I can get back on the road making money tomorrow
Does the selector on the turbo has to be against the fire wall on that one as well? Or not because mine is ñot programming
All the way to the left towards fire wall
Check out our other videos on the turbo
Where did u plug the extra cable into HELP PLEASE LOL
it goes in between the harness and actuator.
I have a 2016 3500
Do I need the harness or not?
No 13 and up direct swap
OK, thank you, your video helped me a lot
@@fuentedevida1866 your welcome!
How many gallons of anti-freeze did you use and what brand to refill it?
@@fuentedevida1866 my gallons are not stock I have a Mishimoto radi......you dont need to drain the whole system to change the actuator. we use :
amzn.to/4cx7LXy
Mine is just flashing green and i dint hear anything moving in tgr turbo
Try and do it again....did your turbo shaft move freely when you had everything off
@@DIYKAI yes the turbo vein moves freely. I installed in the left position and installed the bolts. Plugged up 5he programmer and I heard nothing
@@howardpaxtonjr5071 at first we did not either have you tried to program it again? If the green light is lit then you should be good
@@DIYKAI i took it off and checked everything and even left it off but plugged in,still nothing moving at all. So I figured it was dead out thr box. But it wasn't the one from what you ordered it was one by misakomo. Im returning that one and getting the one you got
@@DIYKAI all lights came on for a few seconds then just bottom red one was on. Pressed thr button and green light blinked and nothing was moving or programming in thr actuator or turbo.
Do you know of any that will work on a 2019? Or could these work on a 2019?
Probably not 2019 was a 5th gen these are for 4th
What year is your truck thanks in advance
2012
@@DIYKAI I have a 2014 do I need the harness?
@@daddynowski no 13 and up had this style it's an update to the 10-12 truck, 13 and newer have it just make sure your harness is still in good shape
@@DIYKAI awesome thanks for the reply appreciate aloha from Hawaii 🤙🏽🤙🏽
Your welcome! Good luck from the East Coast 🍻