You are as good as any computer expert I have seen on here. Excellent presentation and well thought out. Do you intend to do a video on how to incorporate all of this into FSX? How about the software for the monitor you have added?
Thank you. This was very good for me. I am thinking about building one for my home use to practice and just have some fun. You had the prices and call numbers and was very helpful overall. I think you said there was a second video which I must now find. I would like to know a bit more about the toggle switches you mentioned towards the end of the video. I also would like to know a bit more about the GPS and its connection to the system. Again, thank you. This was excellent! Tony
I watched this video about 4 times. Seems I learn something new each time I watch it. How do you assign functions to the toggle switches? Do you need additional software such as FSUIPC? In any event, do you use this software? If so, could you please give a little explanation/How TO? Thanks, Tony
Tj ohara Saitek products have their own software, or you can Download software called Spad, wich needs a free version of fsuipc. Great Thing about saitek, is that you don't have to go through programming, It is basically plug and Play.
I'm starting to build something similar. I already have my instrument rating but I've never really used it to much. Has this simulator helped you keep current as far as procedures . And your scan. I know you can't log time. I just want to improve my skills so when I fly in airplane it won't be so tough. Thanks Bobby
Marek, The switch panel is in place of Saitek Throttle System. Did you have any problem holding the panel in place without the clamps? Also it looks like you had a metal plate bent at the GPS. Is that so and lastly what is the depth of the shelves for both the monitors and also the flight panel. Great job, you should be proud. Thanks, Buzz
Buzz Foster Thank you Buzz..I drilled 2 more holes at the bottom of the Advance Pane and connected the panel with the shelf for better stability. The plate near GPS is just a wooden plate painted black that connects the center console (made of old cabinet) with the panel. Its resting behind the GPS and its not attached to anything. The depth and height of the shelvesupper shelf: 40 inches -height., 16 in deeppane shelf: 26 -height, 20 deep.If you need more detail pictures send me mail at : marekmarciniak11@gmail.comTake care !
Awesome! very optimal setup. Can you tell me how you removed instruments from view and able to use only the saitek displa y and the GPS, what softwares did you use for gps
Hi Marek, thank you very much for the videos and instructions. I already bought all the instruments and the advanced panel. My question is what is the height of both desks in your setup. The desk for the panel and the one for the monitors to have a comfortable seating position like yours. Thank you again for your time and dedication. You were my inspiration to build this project. Regards Alex
Alexandre Salloum the height of the monitors shelf is 40 inches and the shelf for panel is 26 inches. I am 6.1, I have a office chair with adjustable height. For me this work perfect. Thanks for watching and if you have more questions go ahead ! I am here to help.
Hello, sir, big fan of yours. Just want to ask if you have a tutorial on how to connect the Hannspree as a virtual instrument? Step by step? I would choose that as the Pro Instrument Panel is so expensive. Thank you.
Hi Marek, Thanks again. I am putting together a system similar to yours, so I watch your stuff a lot. The guys at Pilot Mall are great when it comes to shipping and customer support. What type of table do you use? And what chart software would you recommend? Thank you so much, Tony
hello Yes, The CAP comes with the space for Monitor. The manufacturer recommend a Hannspree HL HL161ABB 16-Inch Screen LED-Lit Monitor.. Glad you like my setup. Thanks for watching !!!
Oh, one other question Marek. The monitors I find are 15.6 inches. Even the one that saud 16", the actual dimension is really 15.6" This should work with the Saitek flight panel, right? Some monitors do not require a separate power supply. The USB supplies the power. Do you see any issues with the USB supplied power? Would you recommend a separate power source? Thanks, Tony
I know you have probably gotten this question alot, but do you know the exact desks you used for the panel and monitor. I love your setup. Thanks and Happy New Year!
Mark this set up is awesome, I was trying to build something very similar myself, but I lack the gadget and technical knowledge to do it, so a friend just forwarded this video. I'm impressed by how you managed to put this amazing set up together and I bet this helps a lot to master your pilot skills. Would you be able to provide additional guidance and share some purchase links (Amazon, eBay, etc) as I tried with your info above but not sure I'm getting the exact items (I'm seriously newbie on this), and don't want to mess up with such an expensive purchase, I don't want to end up with compatibility issues and stuff... we can chat over skype/email. Cheers from Costa Rica! Leo
SrothSaraiel hey buddy. sorry for such a late response. i wasnt really checking the messages on my channel until now. if you still need help i can provide some info. thanks for watching !
I just received the pro flight panel radio only..Do you know how to turn the led displays off when not in use but still plugged in to your computer via the USB cable when the computer is turned on for other applications? ( My pro fight radio panel display appears to be lit permanently so long as it's plugged in and the computer is on, whether in the simulator (xplane) or not and would prefer the displays to not light up/display info when not in the simulator..(SPAD driver installed..the original Saitek driver did not work for me at all- the Saitek driver just made the display display random, constantly changing numbers)..Thanks for any feedback
justinspirational At W8.x power saving mode will turn off panels when not used. In older Wins you have to unplug panel or use USB hub with switches (on/off)
Jiří Kocman thank you- I want to have my windows 8.1 computer to run in high performance mode (to get best frame rates in my sims) so not sure if that would still work unless you are referring to something else..I may get a USB hub with switches but am waiting to see if the saitek pro flight switch panel (which I've also ordered but yet to receive) will turn off the panel displays by switching the alternator and master battery switches off on that panel (as someone else has suggestedthat may do it)..also how do you set up the fourth monitor in the cockpit to display the instruments only? (I have a 3 monitor wide nvidia surround set up too- two gtx 980s in SLI, but utilizing one of my spare monitors similarly as a 4th instrument display would be helpful- just not sure how to set up in FSX or XPlane 10)- thanks
GREAT just what I'm looking for ..and so strait forward ..do you have a video on how to hook every thing up to pc or does saitek have instucs for all the gages?
Saitek is game locked though isn't it? I wouldn't be able to use these systems on like War Thunder, IL2, DCS, Falcon 4.0, Elite Dangerous, or Star Citizen huh?
I use my Saitek x52 Pro in X-Plane, Elite Dangerous and FSX =) You could even play Call Of Duty with Saitek's controllers, though it probably would be difficult
I have everything you use in the video except the Hannspree monitor which I can purchase. Doe it run on a seperate computer or how do you display the instruments? If you have a video on this I would gladly check it out!
is the hannspree ('virtual instruments') monitor set up as an ACCESSORY display or optional SURROUND display and what input are you using- HDMI, DVI etc to work with the 3 main nvidia surorund monitors? did the Desktop Aviators GPS unit come with the screen for that price? thank you
Marek Marciniak thank you- do you know the exact desktop aviator model to look out for including teh screen so I can research it please and do you know if it's compatible with XPlane 10 at all please? Thanks once more
justinspirational www.desktopaviator.com/Products/Model_2450/index.htm currently out of stock. As far as i am concern it is only foe MFS 2004 and X. Thanks for watching !
Hello Marek - Your Video is very helpful. Could you please let me know which Windows OS you are using ? I recently tried these on Win 8 and its not compatible and planning to downgrade to Win 7. Please advise the best OS for SAITEK Instruments.
Marek, I will be building a sim much like your setup. My question is how do setup the outside monitors to not show the virtual panel. I am a former pilot lost my medical and plan on using the sim to do aviation seminars at schools in my area to promote aviation
hello, I am a fax user and saitek one too.I have recently bought a saitek switch panel (one with switch's for operating lights ).I have properly installed the CD software provided with the panel and then when I open fsx a warning pops up saying unable to connect to FSUIPC. THIS ERROR IS FREAKING ME OUT PLEASE PLEASE HELP ........
I Marek, Thank you for your help I was wondering if you can give the info concerning your monitor for the GPS. What model is it and how big is it. Do you simply drag the GPS to install it on the monitor like you do for the bigger monitor? Thank you for your time. Alex
the GPS comes with monitor. I purchased it from Desktop Aviator. Simply DISPLAY your GPS on the main screen and then drag it to the GPS . I explained it in one of my other videos. Thanks for watching.
Hi Marek, thank you for your instructions. What FSX to buy. There seems to be several types. I have noo idea which will work the way you have it setup. Also what flight chart software do you use or would recommend? Thanks Tony
MrNIEUWJAAR I use 2 shelves. One for monitors (longer but thinner) and another shorter but thicker for the instrument and avionics panels. Thanks for watching !
Thanks. I can't seem to find a HL161ABB monitor which could be shipped to belgium. Did you buy yours on Amazon or somewhere else? Also do you think any other 16inch monitor would fit? That would be easier/cheaper for me.
yes I bough my monitor from Amazon. I IT IS Hannspree HL161ABB . I just checked and Amazon has it for 199.59. The price went up. I bought ir for less then 100
Witam, mam pytanie dotyczące monitora wyświetlającego panel, w jaki sposób udało się wyświetlić panel 737 na całym ekranie (bez czarnego pola nad MCP) gdyż mam z tym problem...
Maciej Sobieraj Ja mam tez problem z czarnym polem, z tym, ze jest on po prawej stronie. W sumie tez mi przeszkadza, ale sie przyzwyczailem. Grubosc czarnego paska to okolo 2 cm.Prosze dac znac jak znajdzie Pan rozwiazanie tego problem.
***** u need 2 graphic cards gor it. Then just go to 2d panel , resize it and move it to other monitor. In one of my other videos the whol thinh is explained in details.
Hello I'm a Fsx user, I am playing free flight and know I am starting playing multiplayer but without radio because I don't know how to know the frequency.Can you teach me how to know the frequency?? Is a 3 19inch monitor for tge main view is large enough?? Thanks!!
hello I have the same material at home but ihave a big problem; i d'ont know the path for put the profil game. If somebody know, help me please . I have a Windows 10 with 8 Giga Of RAM Sorry for my english I'm French
bonjour j'était absent. Oui je cherche l'emplacement pour mettre le profileur des instruments Saitek pour les brancher. PC : windows 10 DD : 1 de 1 terra- octet + 1 de 500 gigas RAM : 8 gigas merci
Hey marek I would like to build a setup like this I am currently doing an ppl and want a setup like this can you name all the equipment used and how you did it so I can do the same? I would appreciate it a lot
Im looking to making something like this but 2 monitors for windshield and 1 15 inch screen for instruments for x plane 10 so can someone send me like some tut for setting it up?
![Megan Thee Stallion - Mamushi (Remix) [feat. TWICE] [Official Audio]](http://i.ytimg.com/vi/5c0_u9PsrsQ/mqdefault.jpg)
I was going to buy 6 of those gauges but using a monitor is so much cheaper and it looks great. Thanks, you saved me $400.
Brian T much much better. glad i could help
You are as good as any computer expert I have seen on here. Excellent presentation and well thought out. Do you intend to do a video on how to incorporate all of this into FSX? How about the software for the monitor you have added?
love it. also it's great to see someone spent more money than I did ;)
very nice set up Marek....
Thank you. This was very good for me. I am thinking about building one for my home use to practice and just have some fun. You had the prices and call numbers and was very helpful overall. I think you said there was a second video which I must now find.
I would like to know a bit more about the toggle switches you mentioned towards the end of the video. I also would like to know a bit more about the GPS and its connection to the system.
Again, thank you. This was excellent!
Tony
Really Amazing Home made =) triple screen with 3D cockpit on screen i prefer ^^
Nice set up Marek!
New Aviators thanks
Thanks for sharing, how much is the budget to build one like that? And what are the list of items that I needed to buy please?
I watched this video about 4 times. Seems I learn something new each time I watch it. How do you assign functions to the toggle switches? Do you need additional software such as FSUIPC? In any event, do you use this software? If so, could you please give a little explanation/How TO?
Thanks,
Tony
Tj ohara Saitek products have their own software, or you can Download software called Spad, wich needs a free version of fsuipc. Great Thing about saitek, is that you don't have to go through programming, It is basically plug and Play.
I'm starting to build something similar. I already have my instrument rating but I've never really used it to much. Has this simulator helped you keep current as far as procedures . And your scan. I know you can't log time. I just want to improve my skills so when I fly in airplane it won't be so tough. Thanks Bobby
Great job man!!
***** glad you like it
You are the King of Umm's.
Umm Thank you :-)
Very good clip...here is a question...what drivers are using for the saitek peripherals?
Marek, The switch panel is in place of Saitek Throttle System. Did you have any problem holding the panel in place without the clamps? Also it looks like you had a metal plate bent at the GPS. Is that so and lastly what is the depth of the shelves for both the monitors and also the flight panel. Great job, you should be proud. Thanks, Buzz
Buzz Foster Thank you Buzz..I drilled 2 more holes at the bottom of the Advance Pane and connected the panel with the shelf for better stability. The plate near GPS is just a wooden plate painted black that connects the center console (made of old cabinet) with the panel. Its resting behind the GPS and its not attached to anything. The depth and height of the shelvesupper shelf: 40 inches -height., 16 in deeppane shelf: 26 -height, 20 deep.If you need more detail pictures send me mail at : marekmarciniak11@gmail.comTake care !
Hi Marek ! Once again nice set-up. Is it difficult to wire up ? Total cost was how much ? Where do I get all these instruments you have ?
Awesome! very optimal setup. Can you tell me how you removed instruments from view and able to use only the saitek displa y and the GPS, what softwares did you use for gps
Hi Marek, thank you very much for the videos and instructions. I already bought all the instruments and the advanced panel.
My question is what is the height of both desks in your setup. The desk for the panel and the one for the monitors to have a comfortable seating position like yours.
Thank you again for your time and dedication. You were my inspiration to build this project.
Regards
Alex
Alexandre Salloum the height of the monitors shelf is 40 inches and the shelf for panel is 26 inches. I am 6.1, I have a office chair with adjustable height. For me this work perfect. Thanks for watching and if you have more questions go ahead ! I am here to help.
Hello, sir, big fan of yours. Just want to ask if you have a tutorial on how to connect the Hannspree as a virtual instrument? Step by step? I would choose that as the Pro Instrument Panel is so expensive. Thank you.
Enjoyed the walk through of your MIP. Do you have a web page about your flight sim?
What you use the zoom on 3 monitors, because I see that there is no stretches on both sides?
Hi Marek,
Thanks again. I am putting together a system similar to yours, so I watch your stuff a lot. The guys at Pilot Mall are great when it comes to shipping and customer support.
What type of table do you use? And what chart software would you recommend?
Thank you so much,
Tony
Are you anytime planning to upgrade to Boeing 737 cockpit or any larger airlines???
Marek, first, great setup, love it :)....did the Cockpit Advanced Panel come with the monitor space pre made or did you have to cut it?
hello
Yes, The CAP comes with the space for Monitor. The manufacturer recommend a Hannspree HL HL161ABB 16-Inch Screen LED-Lit Monitor.. Glad you like my setup. Thanks for watching !!!
Oh, one other question Marek.
The monitors I find are 15.6 inches. Even the one that saud 16", the actual dimension is really 15.6" This should work with the Saitek flight panel, right?
Some monitors do not require a separate power supply. The USB supplies the power. Do you see any issues with the USB supplied power? Would you recommend a separate power source?
Thanks,
Tony
Could you do a video on how to setup saitek instruments, yoke, and rudders. I am really confused.
I know you have probably gotten this question alot, but do you know the exact desks you used for the panel and monitor. I love your setup. Thanks and Happy New Year!
Hi. I usetwo shelfs. One for monitors is longer but thinner, the one for cocpit is shoter but litle wider so the panel can fit.
Next Year I'll Built my Fight Sim Like THis.. =) Thumps Up!!
Thank you . Good luck!
Marek Marciniak i added you on facebook.. for you to see the home cockpit i made inspired by you sir
Mark this set up is awesome, I was trying to build something very similar myself, but I lack the gadget and technical knowledge to do it, so a friend just forwarded this video. I'm impressed by how you managed to put this amazing set up together and I bet this helps a lot to master your pilot skills. Would you be able to provide additional guidance and share some purchase links (Amazon, eBay, etc) as I tried with your info above but not sure I'm getting the exact items (I'm seriously newbie on this), and don't want to mess up with such an expensive purchase, I don't want to end up with compatibility issues and stuff... we can chat over skype/email. Cheers from Costa Rica! Leo
SrothSaraiel hey buddy. sorry for such a late response. i wasnt really checking the messages on my channel until now. if you still need help i can provide some info. thanks for watching !
You got deeep into your flightsim hobby.
TooTroo 😎. i sure did.
very nice man !
This set works for 737, A320? Or only for single engines. I say that through the system. Ignition, lever
I just received the pro flight panel radio only..Do you know how to turn the led displays off when not in use but still plugged in to your computer via the USB cable when the computer is turned on for other applications? ( My pro fight radio panel display appears to be lit permanently so long as it's plugged in and the computer is on, whether in the simulator (xplane) or not and would prefer the displays to not light up/display info when not in the simulator..(SPAD driver installed..the original Saitek driver did not work for me at all- the Saitek driver just made the display display random, constantly changing numbers)..Thanks for any feedback
justinspirational At W8.x power saving mode will turn off panels when not used. In older Wins you have to unplug panel or use USB hub with switches (on/off)
Jiří Kocman thank you- I want to have my windows 8.1 computer to run in high performance mode (to get best frame rates in my sims) so not sure if that would still work unless you are referring to something else..I may get a USB hub with switches but am waiting to see if the saitek pro flight switch panel (which I've also ordered but yet to receive) will turn off the panel displays by switching the alternator and master battery switches off on that panel (as someone else has suggestedthat may do it)..also how do you set up the fourth monitor in the cockpit to display the instruments only? (I have a 3 monitor wide nvidia surround set up too- two gtx 980s in SLI, but utilizing one of my spare monitors similarly as a 4th instrument display would be helpful- just not sure how to set up in FSX or XPlane 10)- thanks
GREAT just what I'm looking for ..and so strait forward ..do you have a video on how to hook every thing up to pc or does saitek have instucs for all the gages?
ralph garrett not yet but i think i will do it. thanks for checking my channel up
GOALS
Saitek is game locked though isn't it? I wouldn't be able to use these systems on like War Thunder, IL2, DCS, Falcon 4.0, Elite Dangerous, or Star Citizen huh?
Heck No Bro. Its a regular USB Interface. Assignment software as well as macros 3 seperate modes....itll work for anything pc or mac.
I use my Saitek x52 Pro in X-Plane, Elite Dangerous and FSX =) You could even play Call Of Duty with Saitek's controllers, though it probably would be difficult
That's what I want to hear!
graet job man. very nice.
but cessna cockpit for b737?
I have everything you use in the video except the Hannspree monitor which I can purchase. Doe it run on a seperate computer or how do you display the instruments? If you have a video on this I would gladly check it out!
is the hannspree ('virtual instruments') monitor set up as an ACCESSORY display or optional SURROUND display and what input are you using- HDMI, DVI etc to work with the 3 main nvidia surorund monitors? did the Desktop Aviators GPS unit come with the screen for that price? thank you
justinspirational yes it is hannspree. yes, desktop aviator comes with the screen, they have another model without it, but i wouldnt recommend it.
Marek Marciniak thank you- do you know the exact desktop aviator model to look out for including teh screen so I can research it please and do you know if it's compatible with XPlane 10 at all please? Thanks once more
justinspirational www.desktopaviator.com/Products/Model_2450/index.htm
currently out of stock. As far as i am concern it is only foe MFS 2004 and X.
Thanks for watching !
Marek Marciniak thanks for your swift reply
Hello Marek - Your Video is very helpful. Could you please let me know which Windows OS you are using ? I recently tried these on Win 8 and its not compatible and planning to downgrade to Win 7. Please advise the best OS for SAITEK Instruments.
Windows 7 is the recommended syste. Thanks for watching.
Thank you very much
Alexandre Salloum you got it
Marek, I will be building a sim much like your setup. My question is how do setup the outside monitors to not show the virtual panel. I am a former pilot lost my medical and plan on using the sim to do aviation seminars at schools in my area to promote aviation
+H. Chinski You simply just create a view without instrument panel and spread it across the 3 screens I think.
hello,
I am a fax user and saitek one too.I have recently bought a saitek switch panel (one with switch's for operating lights ).I have properly installed the CD software provided with the panel and then when I open fsx a warning pops up saying unable to connect to FSUIPC. THIS ERROR IS FREAKING ME OUT PLEASE PLEASE HELP ........
Hi,
Nice Sim
One question, what app are you using on your android tablet for chart info?
Thanks
Can you let me know what type of computer you have running the simulator, and the specific components to run the sim. Thanks
I Marek,
Thank you for your help
I was wondering if you can give the info concerning your monitor for the GPS.
What model is it and how big is it.
Do you simply drag the GPS to install it on the monitor like you do for the bigger monitor?
Thank you for your time.
Alex
the GPS comes with monitor. I purchased it from Desktop Aviator. Simply DISPLAY your GPS on the main screen and then drag it to the GPS . I explained it in one of my other videos. Thanks for watching.
Hi Marek, thank you for your instructions.
What FSX to buy. There seems to be several types. I have noo idea which will work the way you have it setup.
Also what flight chart software do you use or would recommend?
Thanks
Tony
Tj ohara i have FSX running on windows 7. thanks for watching !
Hi Marek.
I have the cockpit advance panel and all the Saitek Hardware
I would like to know how do you build the center console?
Nicolás Osorio Larrosa Just a old cabinet painted black. Works great
Ciao come fai a fare funzionare contemporaneamente i due saitek panel radio? io ho SPAD ma non riesco.
How do you put 3 monitors on the computer? Do you need more than one graphic cards?
Very nice set-up! Which desk do you use to put the 3 monitors on?
MrNIEUWJAAR I use 2 shelves. One for monitors (longer but thinner) and another shorter but thicker for the instrument and avionics panels. Thanks for watching !
Thanks. I can't seem to find a HL161ABB monitor which could be shipped to belgium. Did you buy yours on Amazon or somewhere else? Also do you think any other 16inch monitor would fit? That would be easier/cheaper for me.
yes I bough my monitor from Amazon. I IT IS Hannspree HL161ABB . I just checked and Amazon has it for 199.59. The price went up. I bought ir for less then 100
Yes i've looked for it aswell and there isnt a single seller who ships to belgium. Don't you think I could use a 16inch monitor from an other brand?
Witam, mam pytanie dotyczące monitora wyświetlającego panel, w jaki sposób udało się wyświetlić panel 737 na całym ekranie (bez czarnego pola nad MCP) gdyż mam z tym problem...
Maciej Sobieraj Ja mam tez problem z czarnym polem, z tym, ze jest on po prawej stronie. W sumie tez mi przeszkadza, ale sie przyzwyczailem. Grubosc czarnego paska to okolo 2 cm.Prosze dac znac jak znajdzie Pan rozwiazanie tego problem.
Which simulator is it?
Flight simulator x gold edition or flight simulator x deluxe edition?
How much all in total u spend bro i love to have one to someday
wo did. U put the 2D panel on the Second Monitor?
And on the Main Monitor this free view?
Hi . Sorry I don't understand the matter of the question. Can you be a little more precise ?
How did you put the 2d cockpit on the monitor on the left side?
***** u need 2 graphic cards gor it. Then just go to 2d panel , resize it and move it to other monitor. In one of my other videos the whol thinh is explained in details.
Hello
I'm a Fsx user, I am playing free flight and know I am starting playing multiplayer but without radio because I don't know how to know the frequency.Can you teach me how to know the frequency??
Is a 3 19inch monitor for tge main view is large enough??
Thanks!!
my I just add
what is on your tablet??
How do you make that monitor do that the one in the cockpit ?
What kind of computer are you using and what are the specs for it?
Could you tell me all together how it coast you in dollars
hello
I have the same material at home but ihave a big problem; i d'ont know the path for put the profil game. If somebody know, help me please . I have a Windows 10 with 8 Giga Of RAM
Sorry for my english I'm French
You need help with programming the controls ?
bonjour
j'était absent. Oui je cherche l'emplacement pour mettre le profileur des instruments Saitek pour les brancher.
PC : windows 10
DD : 1 de 1 terra- octet + 1 de 500 gigas
RAM : 8 gigas
merci
Hey marek I would like to build a setup like this I am currently doing an ppl and want a setup like this can you name all the equipment used and how you did it so I can do the same? I would appreciate it a lot
+marek marcianak
Yoke and Instruments are Saitek Flight Instruments and Switch Panels are from Desktop Aviators.
Can you turn the knobs of the OBI or HSI. for training purposes
Chris de Vaz yes you can!
how much did this whole thing cost? do you think it might be possible to build myself the whole thing
around 3000 without computer. yes you can build it yourself
Marek Marciniak thats cool man
friedchicken1981 tjfggyggdwn nnnu4uu
Dionelo Betarte i couldn't agree more
friedchicken1981 yes, you can buipd everything by yourself. total cost of it was about 4000 dollars
thanks for watching.
Im looking to making something like this but 2 monitors for windshield and 1 15 inch screen for instruments for x plane 10 so can someone send me like some tut for setting it up?
Isso no Brasil fica em torno de R$15.000,00 reais, um tremendo absurdo.
what type of PC are you using?
If you don't mind me asking, how much did the project cost?
Brit'ish Games about 4000 dollars with the computer
Marek Marciniak jezus
Do u use WIN 8?
***** nope, i have win 7
marek I Will Start To Do That In Jan. 1 I will Follow All You Instruction.. I hope I Can communicate With You Whe my project will start..
sure ! ill be here to help! good luck
thanks Buddy.. =)
Does anyone know where to get a saitek bip from?
Nvm I found one a few weeks ago.
I have one ! I will let you know when I decide to sell it 😊
@@MarekMarciniak I forgot to remove this comment. I found one and bought it a while ago.
saitek works if you fly cessna. not boeing. wish they could make boeing stuff lol. and make these gadgets cheaper lol
i have your same printer
I meant fsx user