What version of waifu2x is injected? Ncnn Vulkan or Caffe. Also if you're informed, what would be the maximum core count (CPU) as I'll probably get a dual socket mobo but don't want to overkill it. I'm just trying to build the most suitable spec system for this program as I use it all the time. I upscale X interpolate movies to 2k/4k with additional filter settings (hevc-slow preset, constant rate factor) which maxes out a 2700x, I've read that 32 core is the sweet spot for ffmpeg but not sure. It seems that resolution upscaling is the bottleneck of a one pass run so based on the waifu2x version what would be an efficient NVIDIA gpu (power and cost efficient) say a 3060 bc of its vram. Also I noticed that the threads option Increases vram usage along with its value, does that still throw errors if there is enough vram?
Waifu2x in EncodeGUI uses the NCNN implementation because it’s the fastest. As far as CPU core count goes, the more the better. though i’ve had someone use a 32 core threadripper and complained that it wasn’t using it 100%. i couldn’t confirm this because they were using task manager to monitor the usage (which is terrible for that purpose) but regardless all cores were active based on the screenshots they sent. there could also be limitations for different codecs in ffmpeg (they were using AVC when they complained). I don’t have any processor near 32 cores and i won’t be getting one like that until for a while just because of costs. So a lot of this is a mystery to me too. For GPUs, definitely look at the RTX 40 series. they are super efficient and fast. They also have the largest amount of tensor cores which will boost the AI upscaling and interpolation speeds hugely. VRAM shouldn’t be much of a concern. I can get away with 8K upscaling and encoding in EncodeGUI with 6GB VRAM and it’ll only use 2/3 of the total available VRAM. Your CPU RAM is what matters the most. the 8k upscaling + encoding in EncodeGUI actively used about 18GB of system RAM so you’ll want a bear minimum of 24GB of RAM if not even 32GB for better overhead.
@@DaGoose how can i change 10bit to 8bit on avc? I have one hevc video that i want to convert in avc, but i cant becuase it says that avc cant have 10bit. I dont care about 10bit, im good with 8bit, how can i change to 8bit from 10bit?
Hey bro, what's your opinion on the most suitable GPUs for encodegui, I have an rx 590 and plan on getting a 2nd although I kind of want to go NVIDIA, are quadros worth it?
@@DaGoose I ask because I am running the rx 590 and a 1050ti atm, both with up to date drivers (amd + nvidia) it was abit buggy trying to get the encoder working I had to knock a few settings around (590 for interpolation 1050ti for resolution). I'm just wondering if low Vram usage(0.6GB) on the 1050 is normal, or would u consider that a driver conflict. It's gonna take 8 days for something that should take 1or2 the max on my system i5 4570.....
it depends on what you’re upscaling, what interpolation setting you applied as well as upscaling settings. Neither GPUs have Tensor cores so AI processes are going to be very slow, especially for upscaling.
i’m sorry but there won’t be any portable/offline installers released due to license restrictions of dependency software. what was the error you were getting while downloading?
@@arifrain5906 i would suggest trying again but open task manager to monitor the wireless communication. if you see constant dips in the data transfer then your connection is definitely unstable. as far as fixing that all i can suggest is try using a wired ethernet connection instead [assuming] you’re on a wireless connection currently.
![[Официальное Видеоурок EncodeGUI] Как Конвертировать Видео FPS | AI FPS Преобразование](http://i.ytimg.com/vi/ozAuitfE9Cw/mqdefault.jpg)
![[Официальное Видеоурок EncodeGUI] Как Конвертировать Видео FPS | AI FPS Преобразование](/img/tr.png)
![[EncodeGUI Official Video Tutorial] How to Use Frame Interpolation | AI Frame Interpolation](http://i.ytimg.com/vi/zHbCbUEm-Vg/mqdefault.jpg)
What's your plans for De-interlacing methods?
deinterlacing will be present in v1.1.2 (ffmpeg yadif & yadif_cuda)
can we hardcode the subtitle with this program?
How to install dependencies in Hybrid Video converter? I got an error of tsmuxer audio extraction call generation called with empty audio id
Awesome!
Soo uuh
What different resize and upscaling?
Is that looks same thing in Hybrid.GUI🤔
Resize is for lowing the resolution from the source resolution whereas upscaling is increasing the resolution from the source resolution.
What version of waifu2x is injected? Ncnn Vulkan or Caffe. Also if you're informed, what would be the maximum core count (CPU) as I'll probably get a dual socket mobo but don't want to overkill it. I'm just trying to build the most suitable spec system for this program as I use it all the time. I upscale X interpolate movies to 2k/4k with additional filter settings (hevc-slow preset, constant rate factor) which maxes out a 2700x, I've read that 32 core is the sweet spot for ffmpeg but not sure. It seems that resolution upscaling is the bottleneck of a one pass run so based on the waifu2x version what would be an efficient NVIDIA gpu (power and cost efficient) say a 3060 bc of its vram. Also I noticed that the threads option Increases vram usage along with its value, does that still throw errors if there is enough vram?
Waifu2x in EncodeGUI uses the NCNN implementation because it’s the fastest. As far as CPU core count goes, the more the better. though i’ve had someone use a 32 core threadripper and complained that it wasn’t using it 100%. i couldn’t confirm this because they were using task manager to monitor the usage (which is terrible for that purpose) but regardless all cores were active based on the screenshots they sent. there could also be limitations for different codecs in ffmpeg (they were using AVC when they complained). I don’t have any processor near 32 cores and i won’t be getting one like that until for a while just because of costs. So a lot of this is a mystery to me too.
For GPUs, definitely look at the RTX 40 series. they are super efficient and fast. They also have the largest amount of tensor cores which will boost the AI upscaling and interpolation speeds hugely. VRAM shouldn’t be much of a concern. I can get away with 8K upscaling and encoding in EncodeGUI with 6GB VRAM and it’ll only use 2/3 of the total available VRAM.
Your CPU RAM is what matters the most. the 8k upscaling + encoding in EncodeGUI actively used about 18GB of system RAM so you’ll want a bear minimum of 24GB of RAM if not even 32GB for better overhead.
"Worker thread" i found it in many players and encoders (like a check box option or an ffmpeg argument) what is it ? and can it speed up my processes
It’s just a call to run ffmpeg in the background (no terminal shown)
hi can u also upload a tutorial about "frame GUI all the settings explained "
FrameGUI is obsolete
If I pick Placebo Would I get better quality?
yes, but using placebo is stupidly slow. Very slow has comparable quality to placebo but is much faster
@@DaGoose Oh Ok Thanks for the Info I've been using Placebo thinking it's better but I guess that's only for compression
my friend, virustotal claim this encodegui installer as a malware... why?
at least 1 antivirus vendor is always going to complain. If a name brand antivirus flags it for whatever reason, then wake me up.
@@DaGoose what do you mean by "name brand antivirus"? You mean the most famous ones?
Norton, Avast, MalawareBytes; any of the big antivirus software.
@@DaGoose you are right my friend
@@DaGoose how can i change 10bit to 8bit on avc? I have one hevc video that i want to convert in avc, but i cant becuase it says that avc cant have 10bit. I dont care about 10bit, im good with 8bit, how can i change to 8bit from 10bit?
Hey bro, what's your opinion on the most suitable GPUs for encodegui, I have an rx 590 and plan on getting a 2nd although I kind of want to go NVIDIA, are quadros worth it?
I only have two GPUs to test it on (RTX 3060, GTX 1080), so i wouldn’t be good to do that type of review.
@@DaGoose I ask because I am running the rx 590 and a 1050ti atm, both with up to date drivers (amd + nvidia) it was abit buggy trying to get the encoder working I had to knock a few settings around (590 for interpolation 1050ti for resolution). I'm just wondering if low Vram usage(0.6GB) on the 1050 is normal, or would u consider that a driver conflict. It's gonna take 8 days for something that should take 1or2 the max on my system i5 4570.....
it depends on what you’re upscaling, what interpolation setting you applied as well as upscaling settings. Neither GPUs have Tensor cores so AI processes are going to be very slow, especially for upscaling.
@@mudzy9820 that would do it
helpful
Pls upload offline installer of encodegui. My dependency download failed multiple time also it has downloaded size of 1.5gb.
i’m sorry but there won’t be any portable/offline installers released due to license restrictions of dependency software. what was the error you were getting while downloading?
@@DaGoose connection is broken pls try after stable connection. If i click retry it's start again 1st download ffmpeg.7z
@@arifrain5906 i would suggest trying again but open task manager to monitor the wireless communication. if you see constant dips in the data transfer then your connection is definitely unstable. as far as fixing that all i can suggest is try using a wired ethernet connection instead [assuming] you’re on a wireless connection currently.
sub spanish pleaseeeeee