Great video Mr Steve. I like the detailed step by step process of removing and install of the new battery. Saw a few videos removing the whole battery cover with battery in it when you didn't need to. Made my job easy. Thank you!!!
This is my sixth video so far. I’m doing the wife’s in a few days and I’m entertaining myself watching people make a mess of a simple job. I’m rooting for Mr Steve to be one of the good ones lol
Good video but forgot to mention upon disconnecting battery you loose the Data for all modules. And car then must drive about a week before runs normal
Thank you! At 5:10 I see the label shows TZ7 12V AGM Battery (probably why you make the comment later stating make sure it's an AGM battery). My 2017 EXL Pilot shows TZ3 12V FLA Battery...old school flooded lead acid battery. I needed to know how setup my CTEK charger; it needs to be setup for standard or AGM battery.
The agm battery is for the touring,elite,black edition. Those come with agm battery for the autostart.the ex and exl does have autostart so it comes with the FLA battery standard battery.my EXL has a FLA battery but thinking to upgrade to agm cause it's a better battery for electronics for these heavy load car now
Great video Steve thank you I have a question is the original battery on the pilot 2018-2020 is maintenance free or needs to add distilled water if needed thank you
I just replaced the battery in my 2020 pilot. That little wire clip would not come off for anything so I was able to loosen the left side hook and the bracket came off from the right when it wasnt under tension
Good thinking. Hopefully it wasn't too challenging putting it back on. As a side note,, your shifter to put vehicle in neutral(won't start & need to push it by hand) is located down by the battery, on top of transmission.
@@daveroski I could not get the wire clip off either. If you try to pry it off you will damage the "bottom piece of the connector". Not sure what it is for.
Hi, I would test the battery voltage (should be around 14v), if that's okay, remove negative terminal for a minute and put on quickly and smoothly. Good luck..
Never thought I'd need it till today but GREAT video with ALL details included! Best one concerning this on RUclips! I saw 2 others and I would have STILL been under the hood! Bravooo!...🎯
Great video Mr Steve. I like the detailed step by step process of removing and install of the new battery. Saw a few videos removing the whole battery cover with battery in it when you didn't need to. Made my job easy. Thank you!!!
Glad I could help out! Thanks for sharing!
My dad and I followed your procedures and changed the battery successfully. Thank you for your thorough video!
You're welcome. Glad it was a success!
So thorough.and soothing to listen, like Bob Ross.
I appreciate that. It's a happy little pilot now..
Thanks bro. Got er done today with my pops. Your video was a great help to watch before the job.
Glad to hear things went well for you. Thanks for the comment.
Good details here not found in other videos we have seen. thanks for posting this.
Thanks for commenting..
Excellent video, never replaced a battery before and Steve made it easy
Thank you. Glad it was a success
Great video. Clear and precise. Thank you very much.
Your welcome. Thanks for the feedback.
great vid!! complete step by step video. no excuse go do it!
Exactly!
Very nicely explained.. Thanks for the video.. Very patient and detail oriented teaching... Thanks
This is my sixth video so far. I’m doing the wife’s in a few days and I’m entertaining myself watching people make a mess of a simple job. I’m rooting for Mr Steve to be one of the good ones lol
Excellent work Mr Steve!
Thank you!
Manufacturers no longer want you to work on your own vehicle and I believe that's why they make it so difficult to do anything anymore
You should really use a systems saver, either connected to cigarette lighter or ODB2 port, it's more than just radio stations and seat memory.
Great video, thanks
Glad to help
So grateful for this 🙏
Thank you. Good luck..
Well done video! Thanks! I’m ready to do the battery change…if only it wasn’t -10 F.🥶
I feel for you. I used to live in the north. First day of shorts here in the south..
Excellent tutorial
Thank you!
Wonderful tutorial!
Thank you!
excellent how to thanks
Much appreciated..
Good video but forgot to mention upon disconnecting battery you loose the Data for all modules. And car then must drive about a week before runs normal
thank you so clear detailed
That was my goal. Thanks for watching..
Nice concise video 😍
Appreciate the comment..
Thank you! At 5:10 I see the label shows TZ7 12V AGM Battery (probably why you make the comment later stating make sure it's an AGM battery). My 2017 EXL Pilot shows TZ3 12V FLA Battery...old school flooded lead acid battery. I needed to know how setup my CTEK charger; it needs to be setup for standard or AGM battery.
You would charge for FLA. The vehicle ideally should have an AGM battery to help with extra electronics and auto start feature. Good luck..
Standard. And be careful not to spill batter acid when installed. It drips onto the transmission housing. Good luck..
The agm battery is for the touring,elite,black edition. Those come with agm battery for the autostart.the ex and exl does have autostart so it comes with the FLA battery standard battery.my EXL has a FLA battery but thinking to upgrade to agm cause it's a better battery for electronics for these heavy load car now
Do you have to update the BMS, if so how ? Was there a reason you did not maintain 12VDC to the vehicle during this change ?
Great video Steve thank you I have a question is the original battery on the pilot 2018-2020 is maintenance free or needs to add distilled water if needed thank you
All batteries for this vehicle will be sealed.
Maintenance free. Btw, the battery i replaced was the original factory battery, so I got about 5 years service from it..
@@howtowithmrsteve thank you
I just replaced the battery in my 2020 pilot. That little wire clip would not come off for anything so I was able to loosen the left side hook and the bracket came off from the right when it wasnt under tension
Good thinking. Hopefully it wasn't too challenging putting it back on.
As a side note,, your shifter to put vehicle in neutral(won't start & need to push it by hand) is located down by the battery, on top of transmission.
Use a wrench just larger than the rod and pry the plastic piece straight up off.
👍🏻
@@daveroski I could not get the wire clip off either. If you try to pry it off you will damage the "bottom piece of the connector". Not sure what it is for.
@@tomturnbull 2:50 in ruclips.net/video/jJZNLdWRedI/видео.html what I did.
How about the radio reset part?is there any code needed after?
I haven't experienced it yet. I believe the radio has internal memory. As long as the battery in the radio is good, you shouldn't have to reprogram.
Hello sir, I just changed my 2018pilot battery yesterday. I don’t know why the monitor isn’t turn on. Am I suppose to reset? If so, how? Thanks
Push and hold the radio on and off button for two seconds.
Hi, I would test the battery voltage (should be around 14v), if that's okay, remove negative terminal for a minute and put on quickly and smoothly.
Good luck..
Thanks for the video,nice job,very helpful!!
Glad it helped 👍🏻
Well done sir thanks nice and slow and you never went off topic one time. Good job.🫵🏻🫵🏻
Thank you. I tried to put myself in the viewer's shoes. Take care..
Never thought I'd need it till today but GREAT video with ALL details included!
Best one concerning this on RUclips! I saw 2 others and I would have STILL been under the hood!
Bravooo!...🎯
Glad to hear that. Drives me crazy when a video leaves out a little detail that ppl have to figure out on their own. ✌🏼