@@sthetixofficial will this fix mine? the chip blinks purple then green but boots into stock. I didnt change anything in the sd card and I dont know what to do
hi can you guys help me, i bought secondhand of switch lite with v4 oled already installed on board, when i playing games (installed on sd or internal memory) is always forced close or reboot the system. is it safe if switch lite have hwfly v4 oled ver installed as modchip on this hardware? after i tried to update my sd card now my switch dead, led light is off and the machine wont booting sytem or hekate. so i have plan to doing this video guide, is it okay i connect switch to pc without removing soldered modchip from the machine? or just removing battery and sd card before connecting to pc? Or instead of me resetting this chip, is it better for me to just replace this oled chip with the latest chip like v5 or v6 that matches with my switch lite? and Is it safe to replace chips if the machine is cannot booting condition? thank you.
my light on the lite chip is blue when i connected the to the usb cable with the dove tail
well it still worked it did reset
Hi Sthetix dear, can this procedure also be done on the original hwfly? with on spacecraft on OLED switch? Thank you so much 😉👍🏻🔝
yes you can.
@@sthetixofficial Thank you so much 😉💪🏻👍🏻🔝🔝🔝
I have installed instinct v6 on my OLED.
Is there any button combination that does what "r" does? resets configuration so it can retrain itself?
R means reset. and there is no such thing as a button combination
@@sthetixofficial thanks for responding and sorry for the stupid question.
I guess the buttons are not even , when the instinct nx do it's job.
2:13 stuck at this point, plug in and there's green light but don't see any 'USB Serial Device' at Device Manager
maybe the reset function doesnt work with your modchip
Is there any other method? Because I can't boot to payload/hekate after update system on CFW sysnand
Thanks for the video.....any tip where to get the clones?
aliexpress, keyword hwfly
@@sthetixofficial thank you so much.
any tutorial on how to flash the instinct nx modchip for oled ?
same guide
Hi sthetix, does this method also work with the latest rp2040 also for clone OLED chips?
i dont know about the RP2040 as I dont use it. I think they are different.
@@sthetixofficial Thanks dear, I will never buy them again, what chip do you use for Nintendo Switch now? Because I can't find hwflys anymore.
I use the V6S and you can find it on aliexpress.
@@sthetixofficial Thanks for the reply, are they good for V1/V2, Lite and OLED???
it is good for the v2, lite, and oled only. for the v1, you better stick with the pico.
Thank u so much.
I needed this 🙌
Good info good guide cheers !
if my chip is lit first purple and then red does not start hecate, will it help?
It doesnt. You need to repair the chip installation, mostly the DAT0 adapter.
well now for some reason the chip appears in device manager and putty can open it but it does nothin i press h or r and nothing
then i guess your chip is locked and you cannot reset it.
Can someone help please? I dont understand where to put the connecter in to the chip. Do I have to take the back off?
you need to disassemble the console
@@sthetixofficial will this fix mine? the chip blinks purple then green but boots into stock. I didnt change anything in the sd card and I dont know what to do
Yes you need to try resetting the chip and see.
If I used spacecraft to the chip, it is secure to follow this video?
it is ok
@@sthetixofficial It didn't work, but thanks anyway ^^
Do you know why the LED turns green but nothing shows up in DEVICE MANAGER?
It is possible that your chip cannot be reset.
hi can you guys help me,
i bought secondhand of switch lite with v4 oled already installed on board, when i playing games (installed on sd or internal memory) is always forced close or reboot the system. is it safe if switch lite have hwfly v4 oled ver installed as modchip on this hardware?
after i tried to update my sd card now my switch dead, led light is off and the machine wont booting sytem or hekate. so i have plan to doing this video guide, is it okay i connect switch to pc without removing soldered modchip from the machine? or just removing battery and sd card before connecting to pc?
Or instead of me resetting this chip, is it better for me to just replace this oled chip with the latest chip like v5 or v6 that matches with my switch lite? and Is it safe to replace chips if the machine is cannot booting condition?
thank you.
Try to replace the SD card first. You can install the OLED chip on the lite.
Thank you!
First comment
CONGRATULATIONS 🥳!
Second!
After this its still sutck in training. What can I do?
recheck the solder point
@@sthetixofficial I resolder it and its still stuck in training. Im going to return the chip and buy a new one
So this is what happened when my chip refused to turn on