I just installed my V5 modchip (I think 5.4 said on the Bord) on my new OLED. The V5 came with hwfly-nx preinstalled (haven‘t looked for the version) Training was super fast. About 15 seconds with my Samsung EMMC
training duration is a very poor benchmark, since hwfly-nx continues for 50 successful boots, and China fw changes it with every revision, last I checked was 20
Hey sthetix, been following you back when you put some tutorials about sxcore and still nice to watch your contents. I was wondering if I can flash my SXCore and SxLite chip with the provided files (HWFLY_NX-0.7.1) ? thank you in advance man
Hi, I bought my Oled switch premodded so I don’t have the micro usb connector that you show in 15:35. Do you know the name of that piece so I can buy it? I would like to flash my chip. I had updated system firmware to 16.0.1 and the chip stopped working so I want to flash or retrain the chip.
each of the USB connector is "paired" to the chip, they have a specific code and you cannot use random USB connector. Don't update the chip, just reset it using a tweezer and the chip will work again. BTW, if you are using the stock chip firmware, please get into the SD loader screen and see the chip firmware version on the bottom right of the screen. If it is 0.31, you are fine.
10:10 , there is way to disable it? when i turn of the console from OFW, after 15s it come back to on, same with both flash fw (HW or STOCK)... Thanks very much , if i flashed the HW, there is way to disable it ?
I said, the hwfly-nx doesn't have the auto hos off feature instantly inside the firmware .. And i didn't mention hekate because i was comparing the firmware, not hekate
@@sthetixofficial comment was also meant for viewers who would find the lack of that annoying but want the faster boot times. some might not know about it being available in hekate
It is available on hekate but as i said earlier, i was comparing the chip firmware, not a feature on hekate. So people know which firmware suits best for users
Bought an oled pre-modded. It's got an unknown version of hwfly-nx firmware installed on the chip, I can see the black "hekate - IPL NO SD CARD" screen when I turn it on without a SD card, and from there I can press both VOL + and VOL - to boot OFW. Thing is, when I power the console on by holding VOL +, the green light does not stay on (looks like it does not enter DFU mode). Is this something that could've been disabled by whoever installed the chip? Is there a way to reenable this functionality? I'd like to be able to retrain the chip using the hwfly-toolbox when and if the need arises.
When I press vol + and power button my mod chip flashes green once and then stops, I'm trying to view the train information but it can't communicate with he mod chip
@sthetixofficial I brought it off ebay with preinstalled firmware which after trying everything in your video I found out was stuck on picofly firmware and couldn't be flashed to anything else
I have a problem, my chip sometimes starts in OFW even though the led is green.. it turns on and the green led is pulsing green, do you know the reason?
Hi man, i would like to modchip my nintendo switch oled for the first time. What tools do you suggest to buy to perform and to obtain the same result like your videos? (an amazing work btw) you can send link for the products so i will have an idea. Thank you so much
Hello! I followed you ever since your 3ds hacking videos and always use you are reference when I need informations for these types topics :) I wanted to buy a switch but I first wanted to know what were the newest hacking methods and if there were some models that aren't hackable (so I could avoid buying something I couldn't hack)? Thanks in advance and have a wonderful day!
How do I figure out which is the best Version OLED Switch modchip currently? I have an OG Switch with Atmosphäre on it… ai really want to install a chip on my OLED
My switch has (hwfly) they unlocked it and everything, but when it is turned on in stock or atmosphere mode, the console shows the logo and turns off, do you know what it could be? They tell me it's a backup problem
Do not manage to understand what is the functionality where when you turn off the console restarts or turns on after 15sec. Can you explain what is its usefulness?
@@sthetixofficial in my case it had not happened to me until after installing the mod chip, how is it possible to deactivate it in an oled with hwfly chip?
@@sthetixofficial Another question, it is possible to see what version of firmware and sdloader the chip has installed with hwfly toolbix, to know if I can update it.
I just flashed the HWFLY-NX 0.7.2 yesterday on my Mariko with Samsung emmc and I see that it glitches considerably slower than the original firmware with the rocket 🚀 screen... The stock firmware with the rocket screen was booting the console much faster in my case. I just flashed the HWFLY-NX because I wanted to have the possibility to bypass the chip at the beginning to boot directly into the OFW without having to launch Hekate so that I can play the original games I have purchased from the Nintendo online shop. Also with the stock rocket 🚀 FW the console was not turning back on after Powering it off from HOS... Each fw has it's pros and it's cons... For me it is essential to be able to bypass the chip at the start to be able to use the SD card with my purchased games, something that the stock fw 🚀 cannot do.
You can always press the volume minus button while turning on the console to boot to ofw using the rocket firmware. You can do the same on the hwfly-nx by pressing both vokume buttons
@@sthetixofficial wow I didn't know 😭 I tried just pressing the + button and both buttons but no the minus only! I'm lame!😅 Where can I find the 0.32 firmware with the rocket screen? It was glitching considerably faster in my case...
Can we flash the chip without removing it from the switch? Edit: I mean replace spacecraft NX with hwfly by using the built in flasher/updater of spacecraft NX tools so I don't have to open my switch(one screw is stripped and hard to open 😔)
@@sthetixofficial hi bro... I tried as you suggested and I encountered an error "failed to flash !" I believe the firmware now is corrupted as it directly boots to OFW now and no LED lights on the modchip. Now question is... Can I fix this by flashing thru the USB connector method? Or do I need a ST Link programmer? I don't have either of the two right now so I'm not sure what to order on aliexpress. I would prefer if I can fix this thru USB connector only but I could br just wasting time and money if this doesn't work. So maybe you have an idea which should I buy?
@@sthetixofficial also can I know what firmware version does your st link v2 have? I was able to find a seller here in our area selling st links for arduino and though I'd try this first. Could the compatibility be firmware related?
@@sthetixofficial pin 37 is SWCLK right? does this apply to all modchips? Shorting GND & SWCLK? I was not able to trace the connection before from the oled modchip so no idea where thr 2 pins were connected before.
I have a question regarding install the android, I just check my modded switch lite, it show "no sd" and bottom right show R0. 32 and H2. 0, some people told me I need to upgrade firmware so that I could install android
I reflashed the stock firmware 🚀 v 0.32 and I see that it boots way faster than the hwfly-nx 0.7.2... As I had noticed after flashing the hwfly-nx that seemed to be considerably slower. With the stock fw🚀 it takes 0-2 seconds to boot the console while with the hwfly-nx it takes 3-5 seconds in my case. This is on a Mariko v2 switch with Samsung sysNAND 😊 Maybe with skhynix sysNAND the hwfly-nx works faster. In my case I'm staying with the stock one! 🚀
Let me ask you one question. I have a sxcore chip that I didn't use and they recommended either spacecraft 0.3.0 or 0.3.2 instead of hwfly 0.7.2 and I was wondering why.
I have the new pokèmon vers oled, do you know what tipe of memory it have? or there is any way to find it ? Thanks ... one more.. how to back and flash the original fw ? You can do with the toolbox? or you need to open the console?
Hi friend, any way to boot to hekate without removing micro sd card, I set autoboot to emunand,I tried to hold vol - and power but it boot to ofw, mine is stock fw. Thank you.
Excuseme i have a switch oled with the chip oled hwfly, worked fine but Now i need yo force the turn off cuz the consol Frezee, and Now don't turn no the chip only flash purple light ando the turn in Orange and turn off... Can You help me
This video cleared so much confusion for me. Thank you so much!
The one on the right
W
W
W
Which one is that, the pick or the hwfly ?
I just installed my V5 modchip (I think 5.4 said on the Bord) on my new OLED.
The V5 came with hwfly-nx preinstalled (haven‘t looked for the version)
Training was super fast. About 15 seconds with my Samsung EMMC
How have you enjoyed having a modded switch? I have modded ps Vita and a few other consoles with CFW but I've not done anything to my switches. Thx
where did you get v5 chip and is that the best one? im trying to find out but dont know where to ask.
No sd is soooo satisfying when you first install a mod chip
training duration is a very poor benchmark, since hwfly-nx continues for 50 successful boots, and China fw changes it with every revision, last I checked was 20
This
will you tell us more about it? I don't really understand
Welp I have no choice anymore as I put the USB cable in the wrong way😅. Stock firmware it is!
Right side. I like simple style.
Hey sthetix, been following you back when you put some tutorials about sxcore and still nice to watch your contents. I was wondering if I can flash my SXCore and SxLite chip with the provided files (HWFLY_NX-0.7.1) ? thank you in advance man
you can
Hi @@sthetixofficial, I have picofly with abnormal booting,,can you help? sometimes it boot to hetake, sometimes not
2 seconds difference on boot practically works the same...
That is why.. Flashing is not mandatory
need some blur @11:55
I understand correctly that what you call stock firmware is spacecraft?
Hi, I bought my Oled switch premodded so I don’t have the micro usb connector that you show in 15:35. Do you know the name of that piece so I can buy it? I would like to flash my chip. I had updated system firmware to 16.0.1 and the chip stopped working so I want to flash or retrain the chip.
each of the USB connector is "paired" to the chip, they have a specific code and you cannot use random USB connector. Don't update the chip, just reset it using a tweezer and the chip will work again. BTW, if you are using the stock chip firmware, please get into the SD loader screen and see the chip firmware version on the bottom right of the screen. If it is 0.31, you are fine.
10:10 , there is way to disable it? when i turn of the console from OFW, after 15s it come back to on, same with both flash fw (HW or STOCK)... Thanks very much , if i flashed the HW, there is way to disable it ?
nintendo designed it like that.. please try using my pack to disable it. github.com/sthetix/HATS/releases
great video well explained
Very interesting thank you Buddy
Your'e voice is dope
Perfect Radio, tutorial, TV Voice
Hey sthetix! Do you have instructions for installing exactly the same chip as on the initial screen of the video for OLED? Thank you!
initial screen? what do you mean by that?
mine has mv1-6, can i update firmware? i had trouble installing android, and also if remove SDcard, screen shows NO SD with the rocket. Please help.
can you flash it with the hwfly-nx?
11:37 or you can also just use the hekate auto HOS off
Yes i know that, the hats pack has it
@@sthetixofficial but you didn't mention it in the video
I said, the hwfly-nx doesn't have the auto hos off feature instantly inside the firmware
.. And i didn't mention hekate because i was comparing the firmware, not hekate
@@sthetixofficial comment was also meant for viewers who would find the lack of that annoying but want the faster boot times. some might not know about it being available in hekate
It is available on hekate but as i said earlier, i was comparing the chip firmware, not a feature on hekate. So people know which firmware suits best for users
Hi can I flash a genuine SX Chip to the new CFW Hwfly-NX??? I will no troubles??? It is possible that? Thanks in advance for Answer me
Possible. Use the same method
Do you use the same Hats pack for the V6 as well?
yes I do
@@sthetixofficialawesome 🙏🏽🙏🏽
Bought an oled pre-modded. It's got an unknown version of hwfly-nx firmware installed on the chip, I can see the black "hekate - IPL NO SD CARD" screen when I turn it on without a SD card, and from there I can press both VOL + and VOL - to boot OFW. Thing is, when I power the console on by holding VOL +, the green light does not stay on (looks like it does not enter DFU mode). Is this something that could've been disabled by whoever installed the chip? Is there a way to reenable this functionality? I'd like to be able to retrain the chip using the hwfly-toolbox when and if the need arises.
I think you need to flash the chip with the latest hwfly-nx using a usb connector
When I press vol + and power button my mod chip flashes green once and then stops, I'm trying to view the train information but it can't communicate with he mod chip
what chip do you use?
@sthetixofficial I brought it off ebay with preinstalled firmware which after trying everything in your video I found out was stuck on picofly firmware and couldn't be flashed to anything else
@Andrew-rh1kg yours is picofly so you need to ask the gbatemp or reddit community for it
I have a problem, my chip sometimes starts in OFW even though the led is green..
it turns on and the green led is pulsing green, do you know the reason?
The chip has a problem
@@sthetixofficial Seriously? because I've already tested 3 chips and they have the same problem..
no fix?
Yes I think that is a chip problem
@@f13ism in oled model or v2 mariko?
@@douglascalixto9086 oled
Idk if it’s possible but can you flash the modchip with a Chromebook?
I don't think so
Please help me! I have NO SD CARD and my firmware is 0.24! How can I uptade it? It does not start Hekate…just NO SD CARD screen.
i suggest dont alter the chip , but try to use my pack, github.com/sthetix/HATS
Why on my NO SD srceen no show me the battery percentage and version 😂
Ur firmware is an older one
bossku,my oled chipnx is r0.30 version.that's my question how to upgrade the firmware throught the chipnx menu? since it unselectable.
Put the firmware.bin to the root of the sdcard and get to the menu. Please try that
@@sthetixofficial thank you bossku, terima kasih
@@sthetixofficial it's worked 100%
Hi man, i would like to modchip my nintendo switch oled for the first time. What tools do you suggest to buy to perform and to obtain the same result like your videos? (an amazing work btw) you can send link for the products so i will have an idea. Thank you so much
you can find the tools on aliexpress, like the Eakins Autofocus microscope. I use Hakko FX951 soldering station , mechanic tweezer, etc..
Please make new hats pack for os 15. Thank you
I did
How better on or off hos?
U need to enable it
Hello! I followed you ever since your 3ds hacking videos and always use you are reference when I need informations for these types topics :)
I wanted to buy a switch but I first wanted to know what were the newest hacking methods and if there were some models that aren't hackable (so I could avoid buying something I couldn't hack)?
Thanks in advance and have a wonderful day!
All of them are modchipped now. Thx
How do I figure out which is the best Version OLED Switch modchip currently? I have an OG Switch with Atmosphäre on it… ai really want to install a chip on my OLED
I used the v6 now
My switch has (hwfly) they unlocked it and everything, but when it is turned on in stock or atmosphere mode, the console shows the logo and turns off, do you know what it could be? They tell me it's a backup problem
i think the nand is corrupt.
@@sthetixofficial It can be fixed? Do you know of a tutorial I want to recover my console 😭😭😭😭😭
try doing the level1 procedure on my youtube channel.
Do not manage to understand what is the functionality where when you turn off the console restarts or turns on after 15sec. Can you explain what is its usefulness?
This is naturally designed by big N, not the chip issue.
@@sthetixofficial in my case it had not happened to me until after installing the mod chip, how is it possible to deactivate it in an oled with hwfly chip?
@@sthetixofficial Another question, it is possible to see what version of firmware and sdloader the chip has installed with hwfly toolbix, to know if I can update it.
to deactivate it we must remove the chip entirely
i think you can try to download the latest version from their github page and install it to your console using the toolbox.
Ofcourse we cannot ignore that you blur everything irrelevant out, but leave the console serial number at 8:29 lol.
console serial is OK. that big N company is looking for copyrighted materials bro, like logo, icons, etc.
I just flashed the HWFLY-NX 0.7.2 yesterday on my Mariko with Samsung emmc and I see that it glitches considerably slower than the original firmware with the rocket 🚀 screen... The stock firmware with the rocket screen was booting the console much faster in my case. I just flashed the HWFLY-NX because I wanted to have the possibility to bypass the chip at the beginning to boot directly into the OFW without having to launch Hekate so that I can play the original games I have purchased from the Nintendo online shop.
Also with the stock rocket 🚀 FW the console was not turning back on after Powering it off from HOS...
Each fw has it's pros and it's cons... For me it is essential to be able to bypass the chip at the start to be able to use the SD card with my purchased games, something that the stock fw 🚀 cannot do.
You can always press the volume minus button while turning on the console to boot to ofw using the rocket firmware.
You can do the same on the hwfly-nx by pressing both vokume buttons
@@sthetixofficial wow I didn't know 😭 I tried just pressing the + button and both buttons but no the minus only! I'm lame!😅 Where can I find the 0.32 firmware with the rocket screen? It was glitching considerably faster in my case...
Would I get banned if I only use the official firmware with a chip installed?
no, only pirated games will make your console banned.
Can we flash the chip without removing it from the switch?
Edit: I mean replace spacecraft NX with hwfly by using the built in flasher/updater of spacecraft NX tools so I don't have to open my switch(one screw is stripped and hard to open 😔)
Try using the hwfly-nx toolbox. I always use usb connection
@@sthetixofficial hi bro... I tried as you suggested and I encountered an error "failed to flash !"
I believe the firmware now is corrupted as it directly boots to OFW now and no LED lights on the modchip.
Now question is... Can I fix this by flashing thru the USB connector method? Or do I need a ST Link programmer? I don't have either of the two right now so I'm not sure what to order on aliexpress. I would prefer if I can fix this thru USB connector only but I could br just wasting time and money if this doesn't work. So maybe you have an idea which should I buy?
You better buy the GD-link OB from aliexpress to fix the chip
Some ST link versions are not compatible with the chip.
@@sthetixofficial does that mean it's not fixable thru the USB method then? Ok I'll look for the GD Link then
@@sthetixofficial also can I know what firmware version does your st link v2 have? I was able to find a seller here in our area selling st links for arduino and though I'd try this first. Could the compatibility be firmware related?
Hi @sthetix
How can I reset the train data on switch lite? I can't find the 2 pin to ground on the modchip
Is your chip flashable?
@@sthetixofficial yes it's the v4.1 hwfly lite with the long usb connector
Find pin 37 on the gd32f350 mcu and short it to the gnd and press the power button
@@sthetixofficial thanks bro! It worked 🙂
@@sthetixofficial pin 37 is SWCLK right? does this apply to all modchips? Shorting GND & SWCLK? I was not able to trace the connection before from the oled modchip so no idea where thr 2 pins were connected before.
I have a question regarding install the android, I just check my modded switch lite, it show "no sd" and bottom right show R0. 32 and H2. 0, some people told me I need to upgrade firmware so that I could install android
you must flash it with the hwfly-nx to run android.
@sthetixofficial do you need to flash hwfly nx for linux as well?
yes
Can we install HEKATE to RP2040 chip? I'm amateur sorry :(
you can.
Thanks very much sir
Which FW would you recommend I'm new to this and have a Samsung EMMC Switch Oled
the latest is 16.0.2
@@sthetixofficial I meant in terms of the FW on the chip 😅
I use the stock firmware
I reflashed the stock firmware 🚀 v 0.32 and I see that it boots way faster than the hwfly-nx 0.7.2... As I had noticed after flashing the hwfly-nx that seemed to be considerably slower.
With the stock fw🚀 it takes 0-2 seconds to boot the console while with the hwfly-nx it takes 3-5 seconds in my case. This is on a Mariko v2 switch with Samsung sysNAND 😊
Maybe with skhynix sysNAND the hwfly-nx works faster. In my case I'm staying with the stock one! 🚀
I'm looking for 🚀 v 0.32 but it's hard, can you tell me where it is?
I do have it but it is not for the oled
Let me ask you one question. I have a sxcore chip that I didn't use and they recommended either spacecraft 0.3.0 or 0.3.2 instead of hwfly 0.7.2 and I was wondering why.
there is no spacecraft 0.3.0 or 0.3.2
there is hwfly-nx 0.72
stock chip firmware 0.31
all of them based on the spacecraft-nx
I have the new pokèmon vers oled, do you know what tipe of memory it have? or there is any way to find it ? Thanks ... one more.. how to back and flash the original fw ? You can do with the toolbox? or you need to open the console?
What is the modchip training?
Initial training to sync up everything
Are modchips illegal? Can I go to prison or get a fine to pay?
it depends on each country regulations
In Switzerland?
we dont know.
hello my friend i have a problem with miy switch v1 chip picofly but no boot atmospher say : failed to get tsek key
I don't use Pico so I don't know the solution
@@sthetixofficial thank u so much
Hi friend, any way to boot to hekate without removing micro sd card, I set autoboot to emunand,I tried to hold vol - and power but it boot to ofw, mine is stock fw.
Thank you.
you need to edit the hekate_ipl.ini file or delete it, and extract it from the hats pack, link.sthetix.info/hats
Hi sir can this firmware used for flash instinct nx v6 ?
Not possible
Very usefull bro🙂🙂
How to boot menu for Nintendo v2?
it depends on the chip firmware.
I can't see firmware version... I can't pull-up modship menu
now do fuse!
Borneo flasher
From zero to Hero
Maybe tutorial on pico fly
no bro
you left your console ID at 08:28
It is okay
Excuseme i have a switch oled with the chip oled hwfly, worked fine but Now i need yo force the turn off cuz the consol Frezee, and Now don't turn no the chip only flash purple light ando the turn in Orange and turn off... Can You help me
try to reset the chip and maybe the dat0 should be reinspected or in worse, you need to reball the emmc
@@sthetixofficial i'll send to the guy that install the chip let me Say that and i hope works again :(
ada jual chip hwfly nga gan hehehe?
Tidak
V6 instinct NX is best
Why is this? Do I need any hwfly when using this?
they do the same job
Why?
2nd😂😂😂
i dont have any modchip menu
Yours is the older version
First !!!
First