Detailed installation tutorial of hwfly switch V1 V2 modchip, switch 普通版 续航版(电加版) 芯片详细的安装教程
HTML-код
- Опубликовано: 13 сен 2024
- 如果你想要购买switch芯片或破好的switch ，可以通过邮箱联系我，也可以在我的淘宝店里下单。
If you want to buy the switch modchip or modded switch, you can contact me via the email. My email address: liqihah@qq.com
如果你想要购买switch芯片或破好的switch ，可以通过邮箱联系我，也可以在我的淘宝店里下单。
If you want to buy the switch modchip or modded switch, you can contact me via the email/telegram. Twitter:@liqihah1
My email address: liqihah@qq.com
not working
I just wanted to say thank you. I was able to install a mod chip my first try, thanks to your video.
Hey, where did you get this Chip ? i ask for a friend
@@Mischa_Ulloth aliexpress
@@Mischa_Ulloth eBay
@@Mischa_Ulloth Amazon
What do you do after the physical installation? Just boot up the CFW from the sd card? That easy?
The soldering is just flawless, I'm astonished by the massive skill.
Nice work indeed.
What a clean install? Very very well done!
The dislikes are from all of the Nintendo employees 😂
anyone seeing this in 2022 you will need a microscope usb type to successfully do this install. i did it originally without a microscope and my soldering points on the surface mount resistors looked good to the eye, well one day my chip stopped working so i took it apart and used a USB scope and i saw that two of my joints were cold joints and were loose, the chip worked for a while like that but it was not correct. you need a usb scope that can zoom at least 100x and preferably 500x or more so you can see at a near microscopic level and make sure you have solid joints onto those resistors. it is a very very complex job and amateurs should not attempt this install at all.
I did it with just a magnifying glass lol came out legit
When the hell will they come out with plug n play modchips lol
@@kingovo1687 when you figure out how to do it , if it was easy it would be done.
@@kingovo1687 they won't considering what you have to connect too there's no real way for it to be "plug and play" they could add the c wire from the emmc adapter to the other piece but that just saves one step of soldering and makes it harder to maneuver
As someone who's not even an amateur I'm gonna attempt it myself and I'ma live stream me attempting it lol I payed $40 for a brand new OLED specifically to try this
Can't wait for the new modchip rasperry! omg... hope it works
I guess it'll need soldering as well
@@ilyeser1708 yupp...
This is like magic to me
Hello, do I need to clean all the thermal paste around the tiny tabs that the modchip gets soldered onto?
Does the device boots normally if you don't connect the mod chip with the cables, if the cables are already soldered in place?
My mod chip is installed and the led glowed for 2 seconds and went off right after and never turned back on. But my display is not starting. The backlight works but not picture.
So should the device boot normal if the cables are soldered but the chip is not connected?
//Edit: ok so everything is installed and the device boots regularly. But the mod chip doesn't blink at all. I checked the values against ground an everything is attached and has a value. Can you help me troubleshoot? Anything I can measure or check if the chip is functional?
did you flash the modchip beforehand? it may have been lacking firmware
@@lulledart in the end I did one solder joint incorrect and this caused this mess. After fixing this the chip works and still does
I did everything right but before i put my sd card it says boot.dat error why ??
When i install the mod chip will it be compatible with official firmware 14.1.0 currently on my switch? What is the prerequisite?
Yes
Can I use kapton tape and thermal paste instead of isopropy alcohol cause I don't have it
Hi, i did same step but on startup giving boot.dar error
what should be the reason
I think that you did i right. Now you do whichever firmware you decide on.
You have successfully installed it
Thank you. What to do after this? How to set up the TF card?
Hekate
Can you choose what the switch boot into after installing this chip into a V2 model? I have digital online games I would like to still play. So I would like to play using Stock sysMMC.
Basically what does the switch boot into:
CFW - sysMMC
CFW - emuMMC
Stock - sysMMC
yea you can do that basically on every mod chip
I have a switch serial number that starts on XKJ not XAW will it work on any serial codes?
Yes
@@wizard-wm7gh Thank you very very much
@@caloocanboy6781 you need hwfly v2 chip soldered to your switch gpu for cfw
XKJ and XKW need v2 hwfly
XAW patched and others need v1 hwfly
if u have XAW you might be able to just do with rcm jig
@@wizard-wm7gh How do you know this?
Is this the same procedure for picofly?
yes
How can I know the type of mod chip I'm going to buy? Thanks man
Your email isn’t working. It keeps saying delivery failure
could you try this email: dzbjbdnhbh@foxmail.com
if i use the latest gnx package can i go straight to the official base release to see if my firmware is above unlocking? Or could there be some risk? , after doing that, can I reserve it to backup and build? or is it better to wait for the new firmware to unlock?
Is necessary to cut the shield plate?
yes ofc
It will not fit without cutting the back plate
Is this a v2 or an oled
V2
if already i have the hwfly modchip how i can to install hekate
from where you bought it and did u but it?
"without any bulge"
just how I like my women :'D
💀
What did you use for soldering??
I think they used a soldering iron
FLUX
Uso flux amigo eso hace que lansoldadura agarre mejor , pero yo tengo una duda espero me puedas o me puedan ayudar , ya vieron que pone el flexor que soldo y que encierra en ps1 un resistencia y en otro que es ps2 encierra otra resistencia y ahi solda ,pero mi duda es tapo toda la resistencia completa con soldadura tanto la ps1 y la ps2?? Espero respuesta saludos gracias
@@riquelmeneymar5515 no se ve muy claro :(
@@DJtheck si uso flux , aun que nose llegue apreciar pero es flux ayuda que la soldadura oegue rapido es eso amigo, . Oye tu saves para que sirve el flexorcentro de carga llamado UP ese flexor para que sirve??
Will this work for any switch or it still has to be a certain serial number?
Any switch is compatible that’s why you use a mod chip
modchip is very expensive because not made anymore and very rare to find, better buy non patched model and use cfw certified better than modchip
@@monmonmon4177 it's called sxcore or something
@@monmonmon4177modchips are no longer expensive, it is now the risk of soldering on these chips that make it less lucrative than just buying a v1
Why did you choose not to install the little debug port that comes with the modchip?
is it better without that piece?
Una preguntas , solo connesos dos flexores fue suficiente para hakear la consola ??? Y que flexor dices que lefalto o cual esnque tu mencionas y para quese supone que sirve ese que tu mencionas quefalto espero respuesta saludos gracias.
solo con esos dos flexores o componentes es su ficinente para que este hakeada y lista la consola ?? Y ese procedimiento tal como muestras en el video , lo puedo ralizar para cual quier nintendo switch tanto la vercion del 2017 que fue la primera en salir como la segunda que fue en el 2019 que sedestingue por mas duraxion de bateria y caja roja ?? Espero respuesta saludos gracias
V2 switches are patched, so it means it cant be modded thru sd card. I guess with chip it can be done
@@Yurij_Dopted the USB port is for flashing the firmware onto the modchip
thats only installed when you're going to update the firmware on the chip
The cable you showed us is not the same
Never directly touch the PCB as your finger can seriously damage the board via electrostatic discharge.
💀💀
False, you have to "touch the ground" before start working to normalize your static charge... Or you can discharge all the condensators by power on the console while the batteries is disconnected.
While you can kill parts by electrostatic discharge in theory, it's actually damn hard to do in practice.
@@twanheijkoop6753 if you arent static charged no, there are suit to collegate the technician with ground so he can't pass the electricity trough the board
@@twanheijkoop6753 it's more dangerous your skin oil... Some components will go Short if you touch it because your skin oil made the circuit and fried out. Sorry for my English isn't my first language and I just woke up from a bongo
Salut
J'ai une question..
Est t il possible installer une puce hwfly oled v4.1 sur une switch v2
Oui mais ultra difficile
Hello, I really want to get my hands on the jailbroken nintendo switch oled, but I wouldn’t dare myself to do it. Would it be possible that I pay you, and you do it? If yes, how much would that cost?
Thank you!!
Been 8 months and no response☠️
Can some kind commenter help me to know what I do after installing the chip? Do I need to turn the device on RCM mode and inject the Hekate payload or is booting the modchip gonna do that for me (if I have it on my SD card), and I only need to turn on autorcm in the settings?
The Modchip itself boots hekate, so no autoRCM needed as there is no payload to be injected
The payload is sent to the switch via the modchip, there is nothing else you need to do
Does this work with the switch lite?
m.ruclips.net/video/jM7VkPuxpxI/видео.html
Hello can someone help me, I have an error ==* I think it means CPU always reach BCT check (no glitch reaction, check mosfet) what to do in this case. V2 chip new 2040 plus witch flex ribbon.
Can we start the switch on normal firmware after that
What what this allows you to do is add a emmc emulator for the homebrew stuff and you can keep the normal firmware how it is and that's what you'd use if you still wanna play games online etc, you can use internet with the homebrew stuff I just suggest not playing online games unless in the normal firmware
2 firmwares stock and custom , with custom, block all nintendo traffic with dns
hey there, can we update the firmware on this chip or is it not flashable?
It has a micro USB for flashing so probably
@@Lucasbird47 that's for updating the bootloader, not the firmware
That thermal paste 🤮
I'm sayin, lol. How did that come out of a factory?
I have an unpatched serialnumer console. What are the next steps? Does anyone have a good guide for me? I appreciate that very much!
Buy an RCM loader w/ RCM jig. Turn off your Switch, slide the jig into the right rail, connect RCM loader into the USB-C port, press Volume Down and POWER button at the same time and you should load to Hekate. And just launch to your CFW. (WARNING: TURN OFF YOUR INTERNET CONNECTION TO AVOID BANNED CONSOLE)
ayo if its unpatched u got lucky look dont get the HWFLY you wont need it all u need is a RCM Jig and TegraRCM with the payload most is free jig u can make it or buy it up to you if u dont want to risk smaller chips or flakes on pins buy a jig its around 1€ to 5€
and watch a youtube tutorial just search Nintendo Switch RCM tutorial u should come across one to your liking also make sure the files u use are for your version
@@idkwastaken Technically it would mean you can't connect to the internet at all until you block Nintendo's servers
Holy globs of thermal paste.
its too much omg
@@emanuelepascale1080 better put more than little
@@sam_ed no - just put the right amount. period.
I asked a technician to solder my hwfly core 3, but it only turns purple, could you help me? what can this be?
its burned
the tech stayd too long with the solder iron
@@kokoblokoFPV the switch turns on after about a minute with the purple led, but without unlocking and without sd card. if it was burnt, it shouldn't call, right? In the solder it presents communication between the points, the problem could be the chip? And if the chip was working he wouldn't see turn on without sd card, right?
@@MrNote1000 did you manage to fix it?
@@DawnVengeanceX I got it, the solder was thin I just put more solder and it worked.
I’m guessing buying one of these mod chips is going to cost a lot... :(
around 100 bucks
@@Acecy dude where are you getting yours from? $100 a steal
@@Acecy got mine for 135 since I paid for faster shipping, but yeah, saw some chips selling for 95 dollars on Ali
@@nutty9583 this one seems like it just plugs in if so that’s cool but if not i’m ok with soldering
Got lucky and found one on eBay for $45 and it worked
çip nereden alcaz ???
Internet
Where to buy chips?
please contact me via the email: liqihah@qq.com
How can i order?
My switch got banned after buying second hand Nintendo switch
What ? Your Switch A got banned after you bought a used Switch B ?
Did you hack your Switch A ?
@@ilyeser1708 I just turn it on and connect to my wifi after I receive it and I can't create my account because it said "your console currently restricted by Nintendo being online"
@@elixirpyrogaming1260 Aah, then you got scammed pal, if I understand...
The used Switch once had been hacked and banned (or the previous user never connected it to the net to avoid the ban, but you just dit it).
Don't know what you can do beside buying a new Switch again...
I send u a email!
has he replied?
@@thijshamersma no
@@jordvanlennep5811 i have contact, no problem guy
your email pliss. not valid