Yeah exactly! All other Arrmas in the 3S series have the SLT3 remote and the only reason the Vorteks is more expensive is cuz the telemetry ability in the DX3 transmitter but there’s no point unless it already comes with the Bluetooth module thing.
You did a much better set up than spektrum themself!! Great great Job. I bought 3 for each of my DX3 remotes so I dont have to keep switching them around.
Great job making an easy to follow video. The setup looks simple. I wonder why Spectrum didn't just include a 1/4" mount. I guess the $16 for a piece of plastic was a financial decision from management. The module is totally awesome. Thanks for covering it in such great detail.
Do you find AVC helpfull for a basher... or more of a hinderence? Do you have to have a spectrum ESC? or is all you need is the transmitter and reciever? thanks
Hey man! Would this app allow me to trim a 2nd servo(for rear stear) for my Losi LMT10? I installed one and I just can't get it to track strait. Thanks in advance!
Hello amigo i have a dx3 like that but i want to know if i can bind it the a arrma senton 6s blx or do i need to get a sr315 and how do you use avc on it too
Hello, I would like to buy the bluetooth module dx2e active for my arrma infraction 6s but I also have to put something in my car to see all the parameters? Or do you just need to buy the module for the radio?
If you take the module out of the controller does it maintain the settings you put onto say one car. Then switch it to another controller to setup endpoints and stuff for another one?
How do you measure the rollout? Also i followed all of the Procedures and I’m not getting any RPM or mile an hour or any data I have a RJ speed & idk the rollout.
You won't get temperature with other brand ESCs. If you want volts, you need a Rx like SR6100AT or SR6110AT with volts port and solder the 2 wire SPMA9570A to your esc battery plug leads & plug that into the volts port.
The bt-2000 module says its only compatible with android 5.1 or above. However the dashboard app needed to successfully connect and view telemetry is not compatible with any new versions of Android 14. Nor has it been compatible with any versions of Android for years now. This makes the dashboard app and bt-2000 module useless for anyone.
Very informative video man, thanks a lot! I just got a hold of a V3 Infraction BLX 3s, I've been trying to find the rollout information but an not having any success. Pretty new to this, does anyone have that info to share? I'm also figuring this is a 4 pole motor.
Thanks man! Great video and I just brought my Arrma Vorteks yesterday. Going to order the BT2000 and mount. Did you ever find the roll out number for the the Vorteks yet?
@@CCxRC I hate the screen on it tho Feels so old school I love the whole phone as your display for settings and telemetry Would you happen to know how many vehicles can bind to the dx3?
Hey man, tuned into your to your podcast and it seems like you live near me. I’m in Clermont and I hear you talk about Ocala. I’m new to the hobby and getting pretty good. Got a rustler and Notorious. Where do you frequent to bash around, I’ve been to new red hobbies a couple times but I can’t run my Arrma there!
@@CCxRC oh ok! Where was that event held? And if no event can you go there and do your thing? But anyways, I love the hobby so far, good mental stimulation for us guys. And I love the variety out there!
@@technober I got separate endpoints to work on an SR6110... you have to follow the steps carefully, cranking avc knob to full clockwise between the right and left steps. Look in Horizon Hobby Support channel here on RUclips. "From the Tech desk: how to set the end points on the DX3 transmitter"
I finally got this to work, I dont have this mod but I got the one for my DXSE trans and I was trying and trying to get it to connect but it wouldnt to my galaxy z fold phone. it wouldnt connect. so I have a older Samsung 7 and then it all worked. Idk why it wouldnt work for my new phone but at least it works now. Thanks for that share. I have this bluetooth mod on backorder so I will see if it connects with my galaxy z fold phone? id well see. Strange it wont work on a new phone? any clues??
Wow super cool Tony, yeah too bad you can’t record that’s why I was going to get this no I have second thoughts appreciate you sharing that is super cool though
I dont' understand how anyone can have that many unread emails on their phone! My Wife has hundreds of unread emails, and I have no clue how she manages them!
@@CCxRC 1st world problems, I reckon! Hey Tony, quick question...I'm really ampd up about purchasing the LMT TRL, however, I'm hearing that people are finding tons of quality control issues when building their kits. Did you experience this? Thanks!
@@727MiX I hate building kits. I honestly thought I was getting a pre-built one to make the teaser video. It went together for me really easily. A few screws were tight to mount the chassis plates to the skid, but that was it. I used an electric driver and it wasn’t an issue.
So, it "calibrated" the speed Lol. What a joke. That ain't no speedometer. Give me break🙄🤣. Change your pinion/spur, then what? It has settings for every gear combo, or what?? I highly doubt it...... 🤦
Exactly. It’s based on the rollout and isn’t accurate. Change your tires and you have to change rollout again. it’s an estimation of values and throttle input. Wouldn’t be useful for actual speed. It actually gives speed if you have it on a stand and it’s not moving. Very similar to the traxxas via the Bluetooth module.
I hope nobody buys this to track your speed, because it won't be anywhere CLOSE to accurate. All this does, is assume your gearing and tire size. Change any one of them, and it's way off. Get a GPS tracker. Only way to do it.
I wish they would include these when you buy the RTR because it's a necessary part maybe in the near future horizon 🤞
Yeah exactly! All other Arrmas in the 3S series have the SLT3 remote and the only reason the Vorteks is more expensive is cuz the telemetry ability in the DX3 transmitter but there’s no point unless it already comes with the Bluetooth module thing.
You did a much better set up than spektrum themself!! Great great Job. I bought 3 for each of my DX3 remotes so I dont have to keep switching them around.
+1. Spektrum dx3 manual is pretty much useless... esp for avc, bind, tx cal.
Great job making an easy to follow video. The setup looks simple. I wonder why Spectrum didn't just include a 1/4" mount. I guess the $16 for a piece of plastic was a financial decision from management. The module is totally awesome. Thanks for covering it in such great detail.
Wow. I’m so glad they finally released this! Now we just have to wait till June til its in stock lol
Do you find AVC helpfull for a basher... or more of a hinderence?
Do you have to have a spectrum ESC? or is all you need is the transmitter and reciever?
thanks
I just picked up this radio and now I’ll be adding these, thanks Tony!
Hey man! Would this app allow me to trim a 2nd servo(for rear stear) for my Losi LMT10? I installed one and I just can't get it to track strait. Thanks in advance!
For the Set up , So you need Spektrum Tx,Rx and the VT200 only ? or does the ESC need to be Spektrum ?
Do you have to have a spektrum battery in order to use the app??
The app is not available in Android Play store
Hello amigo i have a dx3 like that but i want to know if i can bind it the a arrma senton 6s blx or do i need to get a sr315 and how do you use avc on it too
Probably a dumb question but is the temperature measuring the esc temp or motor temp?
Hello, I would like to buy the bluetooth module dx2e active for my arrma infraction 6s but I also have to put something in my car to see all the parameters? Or do you just need to buy the module for the radio?
do you need smart batteries to see the speed or can you do it with other brand batteries?
Have you set the roll out on your vorteks you can’t see the pinion gear when you in stall the motor set up
do you have to be using Spektrum batteries to see the volts left in them
Yes. It has a special wire that communicated with the esc and receiver.
If you take the module out of the controller does it maintain the settings you put onto say one car. Then switch it to another controller to setup endpoints and stuff for another one?
I'm wondering the exact same thing
Very cool. I use my traxxas link all the Time. Spektrum is really stepping up it’s game!❤️❤️
Traxxas want you to buy alot of parts
How do you measure the rollout? Also i followed all of the Procedures and I’m not getting any RPM or mile an hour or any data I have a RJ speed & idk the rollout.
This only work with spektrum battery??
Great video, thanks. The BT2000 module is nowhere to be found though, probably back in stock in July?
What's the rollout stock gearing? Calculator came up with 0.987
My AVC isn’t working, can you help me out?
Can you use another brand esc and motor with the controller transmitter combo?
Yes, you just won’t get all the telemetry
@@CCxRC that good to know. I just bought a Castel combo and my son likes top adjustments on his controller.
You won't get temperature with other brand ESCs. If you want volts, you need a Rx like SR6100AT or SR6110AT with volts port and solder the 2 wire SPMA9570A to your esc battery plug leads & plug that into the volts port.
Great Video, Just ordered the parts, back ordered, but I can be Patient. Thanks , and stay safe.
So the lights on your the control for the battery life dont seem to work , Is it normal
The bt-2000 module says its only compatible with android 5.1 or above. However the dashboard app needed to successfully connect and view telemetry is not compatible with any new versions of Android 14. Nor has it been compatible with any versions of Android for years now. This makes the dashboard app and bt-2000 module useless for anyone.
I'm hopeful this will work with the V2 mojave. I purchased a used one on ebay and ordered the Bluetooth mod from horizon crossing fingers 🤞
Anyone knows the rollout for infration blx 3s 26th pinion ? Thank you
Do you need to use Spektrum batteries for this to work?
No!..
Very informative video, subscribed
Damn that's awesome, will definitely be doin this
Nice
no motor temps ?
Very informative video man, thanks a lot! I just got a hold of a V3 Infraction BLX 3s, I've been trying to find the rollout information but an not having any success. Pretty new to this, does anyone have that info to share? I'm also figuring this is a 4 pole motor.
Thanks man! Great video and I just brought my Arrma Vorteks yesterday. Going to order the BT2000 and mount. Did you ever find the roll out number for the the Vorteks yet?
Did you ever find out how to set your roll out I see you never got an answer ????
@@vincenttuttle3643 nope
does anybody knows the roll out for a stock Vorteks out of the box? The speed which is shown is much to high
0,97
The app no longer exists in Android Play store
I got it just now...
Hey bro did you figure out the rollout for the vorteks yet? I can't seem to find it . Also do u know the motor's pole count?
It’s a 4pole motor. Don’t know the roll out
0,97
I’ve got a DX5c smart and a V5 Typhon will this still work?
No but you can already get the same info and do the same from the dx5c directly.
Great video, thank u. No wonder traxxas offers a gps module to go with their set-up. It's also way more $ to set the traxxas up tho.
awesome information and video
Can you use this remote with several different 3a vehicles?
It can only be bound to one at a time.
🤔 so would this setup be better than my dx5c?
No. The Dx5c would be my choice
@@CCxRC I hate the screen on it tho
Feels so old school
I love the whole phone as your display for settings and telemetry
Would you happen to know how many vehicles can bind to the dx3?
Hey man, tuned into your to your podcast and it seems like you live near me. I’m in Clermont and I hear you talk about Ocala. I’m new to the hobby and getting pretty good. Got a rustler and Notorious. Where do you frequent to bash around, I’ve been to new red hobbies a couple times but I can’t run my Arrma there!
I was there for USTE, but I live in Virginia.
@@CCxRC oh ok! Where was that event held? And if no event can you go there and do your thing? But anyways, I love the hobby so far, good mental stimulation for us guys. And I love the variety out there!
Cool! Might just have to check that out. Thanks
You can set your steering end points without the app. The radio programming procedure is in your manual 👍
@@technober I got separate endpoints to work on an SR6110... you have to follow the steps carefully, cranking avc knob to full clockwise between the right and left steps. Look in Horizon Hobby Support channel here on RUclips. "From the Tech desk: how to set the end points on the DX3 transmitter"
Great info.
I finally got this to work, I dont have this mod but I got the one for my DXSE trans and I was trying and trying to get it to connect but it wouldnt to my galaxy z fold phone. it wouldnt connect. so I have a older Samsung 7 and then it all worked. Idk why it wouldnt work for my new phone but at least it works now. Thanks for that share. I have this bluetooth mod on backorder so I will see if it connects with my galaxy z fold phone? id well see. Strange it wont work on a new phone? any clues??
Too bad it bricks the Radio and Receiver
What esc and rx are u using
The stock ones that come in it. It's a Spektrum Firma 100A Esc with a Spektrum SR2000a rx
@@CCxRC have u used the dx5
Is the Bluetooth optional
You don't have to get it.
@@CCxRC
thanks
Great video
Like you watched it, you commented 6 seconds after it was posted
Lol ☝️
Wow super cool Tony, yeah too bad you can’t record that’s why I was going to get this no I have second thoughts appreciate you sharing that is super cool though
The base is suitable for a mobile screen
6.39 ?
The Bluetooth module is on back order until July. Typical.
I dont' understand how anyone can have that many unread emails on their phone! My Wife has hundreds of unread emails, and I have no clue how she manages them!
It’s definitely a problem. 😂
@@CCxRC 1st world problems, I reckon! Hey Tony, quick question...I'm really ampd up about purchasing the LMT TRL, however, I'm hearing that people are finding tons of quality control issues when building their kits. Did you experience this? Thanks!
@@727MiX I hate building kits. I honestly thought I was getting a pre-built one to make the teaser video. It went together for me really easily. A few screws were tight to mount the chassis plates to the skid, but that was it. I used an electric driver and it wasn’t an issue.
This car is fast but it's not meant for off-road because I used it off-road once and it broke and I was just in the grass and the front spring broke
So, it "calibrated" the speed Lol. What a joke. That ain't no speedometer. Give me break🙄🤣.
Change your pinion/spur, then what? It has settings for every gear combo, or what?? I highly doubt it...... 🤦
Exactly. It’s based on the rollout and isn’t accurate. Change your tires and you have to change rollout again. it’s an estimation of values and throttle input. Wouldn’t be useful for actual speed. It actually gives speed if you have it on a stand and it’s not moving. Very similar to the traxxas via the Bluetooth module.
I hope nobody buys this to track your speed, because it won't be anywhere CLOSE to accurate. All this does, is assume your gearing and tire size. Change any one of them, and it's way off.
Get a GPS tracker. Only way to do it.
Just so everyone knows you need spektrum everything to use it. It's a joke.
Sorry to say, the mobil Mount is crap. Its not for modern cellphones.
No Drag brake?