Thank you! Not only did this help me, but now we're not blaming each other for dirty dishes because of loading the dishwasher improperly! (I know I'm not the only one)
Thank you so much , your video helped me fixed our dishwasher and saved us some $ because we were about to buy a new one , we were so tired of half the dishes staying dirty . Blessings sent your way !
Aw man, this is awesome. Bought the motor and was searching for a video on how to replace it when I came across this gem. Told the wife this and she called me in utter disbelief😂 Thank you
Thank you so much!!! I have the exact same dishwasher and my dishes were not getting clean. Thanks to this video I figured out what was wrong. Thank you!!
Thanks for the help. I had to move the “driver head” out a little bit but then I got a satisfying “snap” when I pressed the bar down. I swear that the RUclips community is the best!
Ah, that's great man! :). Thanks for taking the time to show us (even Samsung didn't seem to release any info on that). I was wondering if I needed to "force" it (generaly not a good idea), but you made me realize I haven't the right angle. If you want more precise reference words for your video : Samsung calls it the "Water reflector" part (in the manual, p.12).
Thank you! Our dishwasher spilled over during a cycle and we were so panicked. The only thing we could find off was this bar. I was worried a piece broke off or something since we couldnt get it to stay and our dishes were not getting clean at all. I should have taken a flashlight to look. I did not see those bolts. This was a very easy fix. Thank you 💯!!!!
thank you. I'm in disbelief that this fixed my dishwasher after spending $200 on repairing it and it was still not fixed. What a pain and I should have searched youtube first instead!
Thanks man! Such a great video, straight to the point and dead on!!! Thanks a million! Need one for the stupid filter that won’t stay in place if you have any advice on that also! Thanks again.
Thanks a lot!!!! without your video, I'd still be looking for how to fix it. pulling the piece attached to the rail a bit helped placing the water fall on the spot
Thanks a lot for the video. Tried several times to reattach the spray arm the. Finally found your video. Simple when you watch someone else do it first. 🍻
oh thanks!!! bought a new house and the dishwasher came with it. I don't like Samsung dishwashers...had a bad experience in the past...the water reflector came off and i didnt know how to put it back. I didnt push hard enough!! Thanks!!
Amazing! I was looking for a video about middle rack removal and your came across. My dishwasher had that problem and I didn’t know it. Now it’s fixed, thanks!!! Still need to find a way to remove middle rack to clean it properly.
It was driving me crazy that I couldn’t get it to “click” in, then looked more closely and saw your shuttle was a few inches up the track. Mine had been all the way back. Once I moved it forward a couple inches and tried again, problem solved! Thank you for the video!
So so easy… when you know how to fix anything it is very easy when you don’t…… well you don’t…. Lol I snapped the linear wash back in 3 seconds!! Thank youuuuuU!!!!
Just commenting to share my appreciation for this video. It saved me a bunch of money hiring a technician. So thank you very much
Glad it helped!
Thank you! Not only did this help me, but now we're not blaming each other for dirty dishes because of loading the dishwasher improperly! (I know I'm not the only one)
😅 on point
I too wanted to add my Thanks! You just saved me $133 and it took five seconds! Very appreciative.
Thanks so much! I had the same issue and did what you showed in the video and now the dishwasher works great. Saved me a repair call.
Thank you so much , your video helped me fixed our dishwasher and saved us some $ because we were about to buy a new one , we were so tired of half the dishes staying dirty . Blessings sent your way !
Aw man, this is awesome. Bought the motor and was searching for a video on how to replace it when I came across this gem. Told the wife this and she called me in utter disbelief😂
Thank you
Ha ha awesome!
thanks man, this is exactly what i needed. The thing look simple but it required a certain angle to clicked back in...thats tricky!
Great!
OMG!!!! Been dealing with this for a while...Very easy fix..You are the BEST!!!!
Glad to hear! That was the goal of this video! It was a relief when we found it too!
Wow, thank you so much. I can't believe how simple it was for such a pain in the butt problem
Great to hear!
Yes it helped. Couldn’t figure it out before I saw your video. Thank you
Great!
You are a genius!!! Thank you so much!!!!
Thank you so much!!! I have the exact same dishwasher and my dishes were not getting clean. Thanks to this video I figured out what was wrong. Thank you!!
Thanks! Prevented a call to the repair tech. Your video is much appreciated!
Awesome!
Thanks for the help. I had to move the “driver head” out a little bit but then I got a satisfying “snap” when I pressed the bar down. I swear that the RUclips community is the best!
Hey! Any advice on how to do this? I can’t get the “snap”. Thank you!
Thanks for this! ❤ saved me time and money. Loved how it was straight to the point!
Much much thanks, this video solved a problem I had been dealing with, hope you have a happy new year
Thank you! You as well!
Ah, that's great man! :). Thanks for taking the time to show us (even Samsung didn't seem to release any info on that). I was wondering if I needed to "force" it (generaly not a good idea), but you made me realize I haven't the right angle.
If you want more precise reference words for your video : Samsung calls it the "Water reflector" part (in the manual, p.12).
You're welcome!
Thank you! Our dishwasher spilled over during a cycle and we were so panicked. The only thing we could find off was this bar. I was worried a piece broke off or something since we couldnt get it to stay and our dishes were not getting clean at all. I should have taken a flashlight to look. I did not see those bolts. This was a very easy fix. Thank you 💯!!!!
Excellent!
Thanks for your video, just made my dishes sparkle again! 👍👍
Glad to hear! 😊
Wonderful!
Thank you! I didn’t try a 45 degree angle. You helped somebody out!
thank you. I'm in disbelief that this fixed my dishwasher after spending $200 on repairing it and it was still not fixed. What a pain and I should have searched youtube first instead!
Sorry to hear about the $200 spent but glad I could help!
Thanks man! Such a great video, straight to the point and dead on!!! Thanks a million! Need one for the stupid filter that won’t stay in place if you have any advice on that also! Thanks again.
Awesome!
Found this out as well with mine. Exact same and needed a push click into place.
Probably saved a call out service fee 👍
Good to hear!
Thank you so much. We have been struggling with this issue for over a year.
Glad to hear it is working!
Thanks so much short and sweet. Saved alot of time!
Thanks a lot!!!! without your video, I'd still be looking for how to fix it. pulling the piece attached to the rail a bit helped placing the water fall on the spot
Thank you so much. You really saved the day! Wish this was easier to find!
Your are welcome! @tacopower
Share it with other to make it easier to find! 😁
Thanks so much, I love this dishwasher and i was worried that I'd have to buy a different one!
Thank you soo much!! Quick and easy explanation and fix!
Hey, many, many thanks for sharing this. It worked like charm. All the best and Merry Christmas!
Thank you! Merry Christmas!
Thanks a lot for the video. Tried several times to reattach the spray arm the. Finally found your video. Simple when you watch someone else do it first. 🍻
Great to hear!
oh thanks!!! bought a new house and the dishwasher came with it. I don't like Samsung dishwashers...had a bad experience in the past...the water reflector came off and i didnt know how to put it back. I didnt push hard enough!! Thanks!!
Amazing!
I was looking for a video about middle rack removal and your came across. My dishwasher had that problem and I didn’t know it. Now it’s fixed, thanks!!!
Still need to find a way to remove middle rack to clean it properly.
Glad I could help!
There's 2 releases around the end where you can take them off and the rack slides off
Thank you! I was struggling trying to attach it back. The 45 degrees hold and snap was the key.
Thanks man. Ours came out and it helped me!
OMGGGG thank you I just search and found your video and I was able to fix mine thank you so much!!!!
Glad I could help!
First video I watched. You are a rockstar
Thank you!
Just fixed mine this way, you rock.
Glad to hear!
Exactly what was wrong with mine thank you sir!!! Going to send this to best buy to retrain the techs doing installs
Thank you
The angle part is what I was not getting
Fixed for free!
Thank you so much for this video! It helped us fix our problem.
You're welcome!
Thanks so much sir for the video and may you be blessed
You’re welcome!
Awesome! Thank you. Same issue happened and this fixed it
Glad it helped
It was driving me crazy that I couldn’t get it to “click” in, then looked more closely and saw your shuttle was a few inches up the track. Mine had been all the way back. Once I moved it forward a couple inches and tried again, problem solved! Thank you for the video!
It was so simple. Thanks man.
You’re welcome!
Thanks for sharing....you are life saver 🙏
You're so welcome!
thank u so much!just that bar fell off, and now I fix it! Thank you!
Very helpful, thank you!
You're welcome!
Thank you so much for showing me that. Fixed!
You’re welcome! Don’t forget to Like and Subsribe as we have more videos coming!
Helped me - thank you!
Thank you for sharing! It fixed my problem.
Thank you. I was not sure if it snapped back in or not
So so easy… when you know how to fix anything it is very easy when you don’t…… well you don’t…. Lol I snapped the linear wash back in 3 seconds!! Thank youuuuuU!!!!
Great!
Thank you for posting!!
Thank you very much you solved a big problem. It kept coming out and we kept putting it back but it won’t work.
Glad to hear!
Omg thank you sooo much for this video it helped alot 😂😂😊😊
I'm so glad!
"Hopefully that helps somebody out." Darn tootin' it did. Thanks!
Thank you.. life saver
Thank you!!!!!!! So thankful for you
Happy to help!
That worked for me! Thank you!!!!!!
You're welcome!
Thanks for this video!
My pleasure!
Thanks so much!
Thank you sir!
Thank you so much!
Exactly my problem. Thanks!
Glad to help!
Yep, that fixed it. Thanks!
Thanks so much! finally able to fix ours
Glad I could help!
Thank you so much it worked!!
Glad it helped!
Thank you so much it did help
Thank you soooooo much
Bro I think you've just caused me to return the order on a brand new one. I was about to junk mine after 4 years thinking it was just dead
Thank you!!!!!
Thank you. I can't believe it wouldn't be snapped on. Let see how it does now. Ill get back to you.
Thank you
Poor design, great video. Thanks!
Cheers mate thanks for that. Not even mentioned in the manual go figure 😂
You're welcome!
Thank you. I just mine came out will put together. 🍺
Thanks it worked! 🎉
Great!
🙏🏿
We have same model dishwasher and water is not coming up easily. We have to try it 3-4 times than it comes up. So what will be the iasue
What do you mean water doesn't come up easily?
I have this problem and we tried it …seems like it clicks on
But when the dishwasher is done
It has come loose again
Any suggestions
When you lift it like he does does it come off
Thank you!!!!! You are great!
Thanks so much!!
Thank you so much!
You're welcome!
Thank you!!!!!
Thanks so much!
You're welcome!