It could be that the Magnet has degaussed do to the cheap magnet used. Replacing the magnet might fix it but i would replace it with a magnet more suited to withstand the high temps. Ferrite magnets operate up to 180 degrees celsius. Samarium cobalt magnets operate up to 300 degrees celsius. Either of these 2 types should do finding one that fits and is strong enough might be the challenge.
Slow fill ( bad water valve or the water supply is not turn on all the) the water is trickling in as seen in the video and also possibly a bad sensor ( it can be checked from the back of the dishwasher 3 wire connector black to brown wire using a multimeter set to dc volts you should see the meter go from 0 vdc to 5 vdc) which verifies a good sensor. If the sensor checks ok and the water wall is moving back and forth the cw and ccw motor is good. There is an assembly that has diverter motor with a switch and 3 hoses attached to it, if the switch (micro) is worn ( no signal to the main controller is detected) the water wall will just stay in the home position, so verify that the sensor, water wall motor, and diverter motor plus micro switch are good before replacing needless parts.
Belt assembly is bad. Common problem with Samsung junk. Needs a new drive belt. Pretty easy fix but they should have made them out of better material. Cheap rubber that cracks and breaks.
The dishwasher tech changes the control panel and the motor. Now waterfall is not shooting pressurized water. We are already in 430 dollars In repairs. I will take my losses and get a new one. Samsung, if you are hearing me, please stick with TVs.
@@tuliuzzu The tech already knew the problem when you stated that you own a Samsung product! My house is full of their crap and I will never buy anything else from Samsung!!
@@BeauPeeps69 Exactly! I too have EVERYTHING in my home Samsung, UNFORTUNATELY!!! what the heck was I thinking. Not even two years after owning our dryer, my husband had to replace the belt, our showcase refrigerator/freezer's ice maker went out, they fixed that. Then it went out again a couple of years later, of course out of warranty. Now our dishwasher has the exact same problem with the waterwall. Gee, I wonder how long before the range and microwave go. Better find wood to knock on since I just opened my mouth.
It could be that the Magnet has degaussed do to the cheap magnet used. Replacing the magnet might fix it but i would replace it with a magnet more suited to withstand the high temps. Ferrite magnets operate up to 180 degrees celsius.
Samarium cobalt magnets operate up to 300 degrees celsius. Either of these 2 types should do finding one that fits and is strong enough might be the challenge.
Slow fill ( bad water valve or the water supply is not turn on all the) the water is trickling in as seen in the video and also possibly a bad sensor ( it can be checked from the back of the dishwasher 3 wire connector black to brown wire using a multimeter set to dc volts you should see the meter go from 0 vdc to 5 vdc) which verifies a good sensor. If the sensor checks ok and the water wall is moving back and forth the cw and ccw motor is good. There is an assembly that has diverter motor with a switch and 3 hoses attached to it, if the switch (micro) is worn ( no signal to the main controller is detected) the water wall will just stay in the home position, so verify that the sensor, water wall motor, and diverter motor plus micro switch are good before replacing needless parts.
the point is samsung is garbage! mines a year and a half old and they're telling me i need 250 dollars in parts to fix the "water wall" SMFH
My motor is loud like that too, i dont think its supposed to be. Hoping that fixes my issue of the three beeps after i start a cycle.
Have the same issue! Samsung dishwasher is so so. I am thinking to replace it with something else instead of repair it.
That’s the problem….what’s the solution……?
Belt assembly is bad. Common problem with Samsung junk. Needs a new drive belt. Pretty easy fix but they should have made them out of better material. Cheap rubber that cracks and breaks.
moja samsung perilica radi bez problema evo vec tri godine
The dishwasher tech changes the control panel and the motor. Now waterfall is not shooting pressurized water. We are already in 430 dollars In repairs. I will take my losses and get a new one. Samsung, if you are hearing me, please stick with TVs.
What was the point of this video, there is no solution?
The point was to let the Samsung tech see the problem before coming to my house
@@tuliuzzu The tech already knew the problem when you stated that you own a Samsung product! My house is full of their crap and I will never buy anything else from Samsung!!
@@BeauPeeps69 Exactly! I too have EVERYTHING in my home Samsung, UNFORTUNATELY!!! what the heck was I thinking. Not even two years after owning our dryer, my husband had to replace the belt, our showcase refrigerator/freezer's ice maker went out, they fixed that. Then it went out again a couple of years later, of course out of warranty. Now our dishwasher has the exact same problem with the waterwall. Gee, I wonder how long before the range and microwave go. Better find wood to knock on since I just opened my mouth.
@@tuliuzzu😅
Looks like problem with the motor: ruclips.net/video/P7cr4B482CY/видео.html