How To Flush and Bleed your Brakes - EASY!
HTML-код
- Опубликовано: 4 окт 2024
- How To Flush and Bleed your Brakes By Yourself!
Porsche996 , Porsche 996 Turbo Brakes , Bleed Ceramic Brakes
Hi Everyone, We take a little "brake" from the 911 3.2 Carrera project to bleed the brakes on the 996 Turbo. Super easy and anyone can do this by themselves. The whole process should take an hour or so.
A word about the bleeder I used... The Motive Power Bleeder would not hold pressure. I even tried completely cleaning and using silicone grease, but the valve just gives way. I was able to get the job done, but there was a bit of having to pump and pump... I want to try the Schwaben Power Bleeder to see if it is any better.
Here is a list of everything in the video:
Pentosin Super DOT 4: amzn.to/2Iu3zuM
Motive Catch Bottle Kit: amzn.to/2FcpeXB
Crappy Power Brake Bleeder (one in video - WE DO NOT RECOMMEND): amzn.to/2I3K5Oh
*Better Brake Bleeder not on Amazon. Schwaben 3-Liter European Pressure Brake Bleeder.
½ Tekton Torque Wrench: amzn.to/2XAnLBh
Safety Glasses: amzn.to/2I72xWz
Funnel: amzn.to/2IILA3V
Anti Seize: amzn.to/2ItkYDG
1/2 Inch Drive Professional Flex Head Long Handle Ratchet; 18" Long with TRP Comfort Grip: amzn.to/2WEn25X
Tekton 19 mm socket: amzn.to/2F0vyB3
Tekton Socket Extension: amzn.to/2WwmJFm
Help support our channel and become a patron:
/ heidiandfrannysgarage
For Correspondence:
Heidi and Franny's Garage
P.O. Box 740487
Arvada, CO 80006
T-shirts and other clothing:
Merchandise:/heidiandfranny....
Amazon Store Page
www.amazon.com...
Facebook Page: / heidi-and-frannys-gara...
Instagram: www.instagram....
Twitter: / heidifranny
Website: www.heidiandfra...
The Cameras and Equipment we use:
Main Shooter:
Panasonic Lumix G85 (goo.gl/geSFpN)
Main Shooter Lens: (goo.gl/RsHkkF)
Main Shooter Microphone:
Rode RodeLink FM Wireless Filmmaker System
goo.gl/aQsmrg
Car Cameras:
Sony FDR-X3000 (goo.gl/P6XdYZ)
GoPro Hero 5 black (goo.gl/kjjr31)
Car Mounts:
Fat Gecko Camera and Camcorder Mount (goo.gl/zqCHvT)
Fat Gecko Camera Mount (goo.gl/AXQAr6)
Fat Gecko Mount (goo.gl/RhyXYT)
Drone:
DJI Mavic Pro and Kit (goo.gl/jQbk9V)
Stabilizer for mobile phones and action cams:
DJI Phone Camera Gimbal OSMO MOBILE, Black (goo.gl/Acr1jg)
Disclaimer:
Due to factors beyond the control of “Heidi and Franny’s Garage”, We cannot guarantee against improper use or unauthorized modifications of this information. “Heidi and Franny’s Garage” assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. “Heidi and Franny’s Garage”recommends safe practices when working on vehicles and or with tools seen or implied in this video. Due to factors beyond the control of “Heidi and Franny’s Garage”, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not “Heidi and Franny’s Garage”.
Awesome music in the video:
Song: Ikson - Deep Dive (VLOG MUSIC - No Copyright)
Music provided by VLOG MUSIC - No Copyright.
Video Link: • Ikson - Deep Dive (VLO...
Music in bumper provided by:
BACK IN SUMMER by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommons....
Music provided by Audio Library • Video
Hat's worn by Heidi and Franny provided by: www.Fabkittenhats.com
Automotive and Car Channel - How To (DIY):
Porsche, Ferrari, MINI, General Car Maintenance
![NOSFERATU - Official Trailer [HD] - Only In Theaters December 25](http://i.ytimg.com/vi/nulvWqYUM8k/mqdefault.jpg)
Hi Everyone, We take a little "brake" from the 911 3.2 Carrera project to bleed the brakes on the 996 Turbo. Super easy and anyone can do this by themselves. The whole process should take an hour or so.
A word about the bleeder I used... The Motive Power Bleeder would not hold pressure. I even tried completely cleaning and using silicone grease, but the valve just gives way. I was able to get the job done, but there was a bit of having to pump and pump... I want to try the Schwaben Power Bleeder to see if it is any better.
Here is a list of everything in the video:
Pentosin Super DOT 4: amzn.to/2Iu3zuM
Motive Catch Bottle Kit: amzn.to/2FcpeXB
Crappy Power Brake Bleeder (one in video - WE DO NOT RECOMMEND): amzn.to/2I3K5Oh
*Better Brake Bleeder not on Amazon. Schwaben 3-Liter European Pressure Brake Bleeder.
½ Tekton Torque Wrench: amzn.to/2XAnLBh
Safety Glasses: amzn.to/2I72xWz
Funnel: amzn.to/2IILA3V
Anti Seize: amzn.to/2ItkYDG
1/2 Inch Drive Professional Flex Head Long Handle Ratchet; 18" Long with TRP Comfort Grip: amzn.to/2WEn25X
Tekton 19 mm socket: amzn.to/2F0vyB3
Tekton Socket Extension: amzn.to/2WwmJFm
I’ve watched quite a few tutorials on this subject and I have to say this is by far the best, clearly explained, not rushed and easy to understand. 😊
Franny, you're rocking those pearls during a brake fluid change. Impressive.
As an aeronautical engineer and petrolhead I can say your description was spot on and puts to shame most male you tubers that do this how to! You covered all the little details!
"like a bunny..." "...vessel" "...just a kiss..." THATS why I LOVE this Lady! She speaks My language. Getting more and more adventurous and doing some of My own car repairs and learned SOOOOOOOO much. THANKS!!!
Unbelievable quality of the show in all aspects. Thanks for the valuable information, which will be used as soon as possible when repairing my brakes.
The best video on brake fluid flashing I have see!
Wow, thanks!
Really well done. First video of yours that I've seen. Impressed with several aspects. Zero incorrect or false information, complete accuracy. Lots of hidden gems in the details. Quite good stuff. Thanks for your efforts
Thanks so much! Welcome :)
Great tutorial. Logical, well organized, and easy to follow sequential set of instructions. I watched a bunch of RUclips videos and found this to be the best. I.e., removing old fluid from the reservoir and replacing it with new/fresh fluid before you start bleeding, how much fluid to bleed out etc. Most other videos don't mention these important points. Also, I really like the way you use the Power Brake Bleeder unit to only pressurize the hydraulic system. A bit more work to keep adding fluid to the reservoir; however, it makes a lot of sense. Especially the cleanup process when the job is complete. Nice job.
This was the most helpful video ever. No one fully explained it like you did. Thank you.
Thanks so much!
Thanks a lot, best tutorial I've found on Porsche brake fluid bleeding.
Love your videos. You really know your stuff and run through processes in a very clear and concise way. Great content.
Nice video, good clear explanation. My BMW dealership quoted me $290 for a brake flush on my 2018 X3. I figured I could do it myself and just purchased the Schwaben 3 Liter pressure bleeder plus free catch bottle on sale for black Friday. Looking forward to doing it myself. You have some fine cars, I had leased an i8 from 2016 to 2019, almost bought it at the end of the lease but didn’t want to own such a complex vehicle as it aged, so decided to return it at lease end. Exceptional car in many ways, I miss it.
Anyway, thanks for your many helpful videos.
I've been thinking about doing my own brake flush for some time on my BMW but have been a bit intimidated by the process.
This is so helpful! Love you Fran.
You'll totally crush it!!
Once again, a very detailed video.👍🇨🇦
Dot 3 and dot 4 are mixable. Dot 5 can’t be mixed with 3 and 4 but 5.1 can be mixed with dot 3 and 4.
wow these videos are ridiculously good. Thanks for sharing
I have seen a lots brake bleeder on RUclips, and you are the best in every detailed you say and do. Thank you.
Thanks so much! That great :)
I gotta say , I’m a pretty good wrench but I was always a little intimidated by my Porsche’s , I have to say I’ve learned allot by watching your vids and do allot of work on them now. . Thanks so much , I appreciate them.
Yea!
I'm looking to buy a 996TT (after saving for Many years) and I know I'll have to do a lot of servicing myself. While I'm comfortable working on cars I was feeling a bit intimidated because it's a Porsche. Your videos are a Huge help in this regard. Your presentation, accuracy of information and video quality are all top notch. I also really appreciate that you put all the info on tools and materials used into the description, getting the benefit of your experience and research makes servicing these cars much more accessible for the average car enthusiast.
I like the 2x4 under the jack! really clever way to prevent having to hassle with jacking then jack stands!
I've always wanted to do this to my car but didn't know how. This video gave me confidence and I'm going to tackle this job! Once again thank you for an excellent how to video! Keep up the good work ladies.
Good for you! Heidi and Franny are the best at explaining these How to procedures. Bar none!
I feel confident that I could handle this job now! You guys have the best most informative automotive videos on YT, thanks again ❤️
Thanks! Trying to give the Master Chris Fix a run for his money ;)
@@HeidiandFranny Chris Fix is awesome. I have followed him for quite some time. You now have a new subsciber. Your content and video ability rocks. I am an old air cooled parts guy and remember the parts
used on the VW like it was yesterday.
Fantastic video. Man, I bet you have an amazing garage and tools.
I made a bleeder from a ''weed'' sprayer and a pressure gauge from Home Depot and and extra reservoir cap. Works great and it was cheap.
Great job Franny! Super attention to detail.
Ya know, I think that is great solution! I bet you can get it pumped up much faster. Great tip! Thanks!
Love you! thank you for all your years of help on my 3.2
I don't own a Porsche but I 💕 how you know everything about everything...AND the pearls! I just found your channel today and my new muse(s)! Thank you!
Awww, how sweet :) Welcome!!
Love the ending with the pop-ups for Patreons. Hopefully many more will now join and support your channel. This is a great video. I spend a small fortune recently getting that work done at a Porsche certified service center (they did a great job for me on a couple other items too but it was expensive). Safe travels!
Hi David, glad you liked the shout-out. Thanks so much for all your support! Porsche certified can be a bit pricey, but you know the work is being done properly. It is important to add that to the mix :)
Nice job. Thorough and professional video that reveals your obvious competency. I agree with your premise for using the Power Bleeder 'dry.' As you said, it prevents potential contamination of the brake fluid while keeping the unit 'pristine' - making its subsequent cleaning unnecessary.
You guys are amazing. Not sure if most folks could do that in an hour, but if they watch your video, hopefully they'll only have to do it once! Great job!!
Thanks man!
using the pump only for providing pressure is a very nice trick!
Nice, warm, friendly, personable DIY brake fluid service video. Great job.Thank you for making it.
Thanks so much!
This is a great video, very well done. I will say I did this job recently on my C2S, and I recommend just filling the bleeder with fluid. This keeps the master reservoir full the whole time, and you don’t have to remove the cap on and off that way. Great advice on bleeder valve to not over-tighten them. Super smart to ceramic coat the wheels at the same time since you have the wheels off. I did the same thing. I wish my wife was into cars like this, your skills are impressive, and your interest in performance cars is not normal for a female, and that’s fantastic. I would watch more of your videos, love your attention to detail😊
Very nice presentation.
Great tip on the wheel hanger alinement pin. I have used them on my Mercedes. Light bulb went off. I need to get a set to use my 315/70/17 wheels on my 80 series land cruiser. Changing those wheels on the trail is a strain. No longer. Thank you so much for making me rethink an application of the wheel pin.
Excellent expounding of brake fluid bleeding. Thanks
Great tutorial
Good video! Used my Motive Power Bleeder two months ago -- did new brakes pads rotors, flush -- and clutch bleed. Power bleeder made job so simple... not so for the frozen rotor bolt that took seven hours to remove with torch, rust breaker fluid, and MUCH patience. Love the channel, waiting for more 911 resto vids...
Oh my... Chris Fix demo-ed a heated coil tool that looked like it would work really well for something like that. Next time I come up against something like that I want to give that a try...
I'm so grateful for this episode and your channel in general. My mechanic told me not to worry about the brake fluid on my '09 Jaguar XKR, even though the manual said it should be flushed at 60k. I'll just start doing it all myself. You guys are such an inspiration!
Thanks Franny and Heidi!! I'm about to do this in preparation for a track day in my 997 C4. Great video!
Ella es excelente mecánico es bien profesional y le gusta trabajar en un ambiente limpio de cinco estrellas el mejor video que he visto y bien explicado paso a paso
Thank you.
I met Heidi this evening at the Porsche 992 release event in Denver. It was a pleasure meeting her in person! I wish you and your channel lots of luck! Keep up the great work.
Thank you. It was nice meeting you as well. Feel free to email us at our website. Were you wanting to see Ozzie and Zeke's channel? They would love to have you visit. Heidi
Hi Heidi and Franny. I’ve just 3 month ago got a 996 na 2001 same colour as your turbo. That’s one of the reasons why I’m back to your canal. Best Regards. Jørgen in Copenhagen.
Enjoy your 996!
I do all ready
I wish Super Blue Fluid was still made. It was so easy to see when you got fresh fluid coming out.
That would be nice.
Right?? Why do all the fluids HAVE to be the same color?
@@HeidiandFranny It's illegal in the US to sell any fluid that's not colorless or amber in color according to the Federal Motor Vehicle Safety Standards. It took them 15 years to realize ATE Super Blue was indeed blue. LOL hooniverse.kinja.com/braking-news-ate-super-blue-illegal-for-u-s-distribut-1153557989 It's so silly as the only difference was a bit of blue dye.
Nice vid. I would add one thing .PFC racing ( supplier to 991 cup brakes) and most people I've talked with who race Porsches at the pro level ( Daytona 24, etc) would bleed the inner caliper bleed screw and then the outer caliper bleed screw for the best chance of removing any air you may have.
Thanks for the tip!
Here from the comment on Tedward. More car action from you guys pls!!
DOT 5.1 and DOT 4 are backward compatible with DOT 3, and can be freely mixed. DOT5 is a specialised, silicon based fluid and must not be mixed or used with any other fluid .
Try out a Schwaben bleeder. Worked better than Motive for me. Also, bleed with some fluid in the bleeder bottle to keep it full while going to each wheel. At the end, empty the bleeder bottle and let air lower the reservoir level to the correct height on the last wheel bled. Cheers!
@@frankm5019 thank you. somehow I missed that! Edited my comment...
Wow, thank you! You did such a great job with this video, super thorough explanation and... omg, I love how CLEAN everything is~!
Ceramic coating the inside of the rim?!? Genius idea!!!
very very well explained...definitely knows her stuff.subbed!
Well done, clear and concise.
What a joy to view your videos, to see your garage and tools, and experience what it's like to maintain beautiful modern cars. I am learning to maintain my three vintage cars-all with German engines: 2003 VW Jetta, 2000 Ford Explorer, and 1982 Audi 4000S diesel. Should I be afraid to tackle a 1987 Porsche 924? Any caveats about that model year? Also, I purchased the Schwaben pressure brake bleeder and will try it on my Audi today!
Perfect ! exactly the way i do it myself :) I love to see that you use the original Porsche wheel pins, 1 tip ; or if you really want to go nuts.. use a special socket with plastic cover to minimize scratching on the wheel-nut holes on the rims, i love this detailed videos, and 1 more comment; looks like the interiour in the 996 Turbo need a proper detail, i could see some dust and dirt ! HAHAHA
I need to get a 19mm socket like that... You bet. -- I did shake out the mat ;)
learn a lot from you every time and love that you are quite thorough. love you!
Thanks for another great 997 video. So clear, well filmed, pleasant, and as always informative! We love you Franny (and Heidi!)!
I always thought good brakes were good insurance. Great job!
Thanks for answering my question on Instagram with my oil. Love your channel. You ladies are awesome.
Thanks RA!
Thank you ladies for making these great diy videos. Y'all are amazing
You bet! Thanks so much :)
Ha-Now I know why Porsche is charging so much for this service. Great video👍
Great video wonderful person you explained it all so well😮
Awsome video
Nice video- thanks for posting ! It’s time to flush brake fluid from my ‘81 SC. Nice touch with the anti-sieze on the lugs, I was really spreading it on pretty thick - I’ll just use a small amount now! Keep up the good work .
Thanks for a great video. You don't mention this, so perhaps a different set up on newer cars. I ran into an issue with my '87, when I pressurized the reservoir, it has a pressure relief valve located on the fender side and blew brake fluid all over the inner fender, not happy face. I put a screw into it then it held pressure and I was able to do my brake fluid bleed. Thanks again for the great videos, keep em coming.
You are wonderful on details
Great job Franny. You always make it look so easy. I may have to tackle this on my Porsche someday.
It will be fun :)
YOU ARE THE BEST. Thank you.
Much respect!
Really nice explanation, well done. I'm in the mood to do my brakes now!
Awesome! Thanks for the shout out at the end :)
Sure!
Hi Heidi, I really enjoyed this video. You were very formative and I will be subscribing and checking out your other videos, Have a great day 😅
Thanks so much!
Another culprit of low pedals, at least with domestic vehicles is when you replace the power brake booster...the replacements have adjustable rods, and you have to use a special tool to ensure it sits flush with the master cylinder piston cup, otherwise you'll be chasing your tail trying to figure out why your pedal is soft, but you have no trapped air or fluid loss. Also, if you replace the master cylinder, it must be bench bled, before installing. I love your videos, especially the Beetle vids. My '73 SB is still waiting for its engine, and I'm waiting for my shoulder to heal from surgery.
Get well soon!
Nice video, Franny. Thank you! 👍👍
very informative as usual, enjoy your updates 😊
Very detailed video and informative. I really enjoyed it. Thank you, please continue to make these awesome videos!!!
Will do! I'll try to give Chris Fix a run for his money :)
@@HeidiandFranny lol... I'll be in the sidelines as cheerleader!!! Go Franny...go Franny!!!
great info. listened to you and bought Schwaben 3-Liter European Pressure Brake Bleeder and also like put brake fluid in the reservoir not the pressure bleeder.
Vacuum bleeder is the way to go for sure, pneumatic is so much quicker than the hand pump.
Very informative and super helpful.
Thanks John!
Very detailed. Thank you.
Well done. Thanks!
Thanks for the video!
Us with common cars do not have those cool bolt extensions, but I could make some myself and just weld some extra bolts to some old ratchet extensions - or just wish I had a Porsche!
Thank you for this video now I know how to use the self bleeding system now I always wondered. How do you use that tool and now you’ve answered that question thank you. I’m hoping they sell this on Pelican Parts.
The wrench you have is called an open end and closed end.
Just an FYI.. the main pressure reservoir is designed to contain the new brake fluid and push it through.. You don't need to constantly de pressurize and fill the master cylinder.. new fluid should come from the pressure vessel. If your power bleeder won't hold pressure it's most likely the gasket under the lid is missing.
i really enjoy your video and tutorial
Yea! Thanks so much!
@@HeidiandFranny
if you can show us for Audi if you have please
Wow. you are GREAT!!
Thanks!
great job thanks
Thanks very interesting. I became interested in how the braking system worked as at the weekend I found a family of 4 mice had built a home in the front trunk under - I think - party of the braking ABS system. They were all re-homed to a friendly nearby tree. Clearly I am not using the car enough.
We found a (rather dead) mouse in the engine bay of the 993 and the vents of the 3.2 Carrera. That is super common... They can be hard to keep out. I hope they didn't cause too much damage...
Well done. *thumbs up*
Thank you!! This was very well explained.
New video on my new phone... Lol
As always great video
Hope y'all have a great rest of the week.
By the way, can't wait for motor removal!!!!
You can usually buy the same fluid in very different colors. Yellow vs Blue, etc.
Yes! Using a different color each time helps to know when the old is flushed out and the new fluid flows in.
❤️❤️❤️❤️❤️ thank you so much for this wonderful video! I’ve been wanting to learn how to do this in a clean manner. I’m so happy to have discovered your channel!
Yea!! Welcome :)
Great video! Thanks!!!
Solved a few.problems i had. I bleed my boat trailer with a motive bleeder and run 3 bottles of brake fluid through lines. I kept getting air bubbles every time. Heard the bleeder at brake caliper can leak air throu threads. I put teflon tape on bleeder valve threads. It still disnt stop the air. Thats thou for answering the air bubbles. Was driving me crazy
Those air leaks are a challenge. Another idea is to smear silicon grease around bleeder to help seal air leak.
Solid job as always :) You can't be too careful with brake fluid. These wheels are hollow spoke aren't they? You did a great job on cleaning them :)
They are the real deal! So much lighter than the winder rims (those are knock-offs). Makes getting them up and down off the rack much easier ;)
Can't fault anything you've said, but a bit basic for me. Keep up the good work!
Cute...thanks for the info....
Super d’autos,super garage,super Femme ! Bisousssss! de France !