I have watched a few of these videos now. The cinematography and sounds as well as the background music is AMAZING. The music isnt loud or annoying, but chill and just white noise to me. (Plus the EXTREMELY satisfying print sounds). The prints are also awesome. You have definently earned this sub.
Nice video! the ghost with legs is really funny to me, just imagining some unsuspecting person picking up a cute little ghost figure and then bam! secret legs! hilarious also, i would be ecstatic if you printed out my name! (Elizabeth)
It needs to be asked 96 times including 7 times for 4 consecutive Fridays. After that special symposium takes place that will monitor regular requests from 10.000 users on regular basis in agreen calendar. It is similiar to religiin. After that when you give all your time you will get nothing.
Me encanto todo... voy a tener que imprimir algo de todo eso, el fantasma lo tengo pendiente para impresion....pronto lo voy a hacer. SAludos desde Argentina....
I’ve tried a few of these prints. The more I try them, the more I realize this guy has his printer dialed in 10/10. I can’t get many of these to work right.
I use 0.20mm QUALITY settings in PrusaSlicer. Moreover it is thanks to the Ender-3 S1 Pro sheet. When it cools down, the prints practically go away by themselves
Thanks for your reply , also in your earlier comments before you replied to mines , I tried the prusa slicer but the Z comp tends to probe the bed before it prints and sometimes it Z offset raise while printing and cause the filament to “noodle” up . Is that a settings to adjust ?
Hi, what do you recomanded please? I hsve ender 3v2, but i have a new, biggest printer. and i can not decide witch one. Do you recomand me the Creality CR6-SE, CR6-MAX, Ender 3s1 plus/pro or the anycubic kobra plus? Thank you
Hello, I would like to print the first name of my nephew and niece, Batiste for my nephew (there is no "p" between the a and the t,, that's what his parents named him) and for my niece Meï Ling or Mimie his nickname. Thanks in advance
I started wiping the springform bed with rubbing alcohol before every print, this helped out a ton. Also, using a brim setting for warping and adhesion helped.
For me it's sticks great. I use Isoproponal alcohol before every print. Also you should check if printer is dialed well. And finally I use PrusaSlicer.
Please support me with a Like and Subscribe If you like my videos 😊
And tell me what name or nickname print next? 😉
I like it better when you show the animation of how the figures are created from the bottom up.
I like your videos, greetings from Colombia
Delon
Andrew
Geoff please
Breno
Short tipp from my experience: If you want the joints of the Moloch to move easier just add a bit of silicon oil. It's great for lubricating plastic.
Thanks for the tip, I will check it out next time :)
And I agree with you because I didn't know that!
I meant that I didn't know that but now I know!
I have watched a few of these videos now. The cinematography and sounds as well as the background music is AMAZING. The music isnt loud or annoying, but chill and just white noise to me. (Plus the EXTREMELY satisfying print sounds). The prints are also awesome. You have definently earned this sub.
Thank you so much 😀
Awesome! The peeking cat is hilarious i love it
Ah man it would be so much cooler if I had a 3D printer
Loved the pumpkin, but I would find a way to put a randomly pulsing led up inside it. The print itself was awesome!!
There are Electronic Tea Lights with that function, maybe that looks good enough? And they have batteries.
And you can get a pack of 24 for like 5-8$
Yes, I should have used smaller led and put it in, it was designed for it, unforunately I did't have any :)
Wow the ghost with legs was the coolest
my favorite print from this video was the ball machine. it was just so satisfying! could you do Squiddo?
You Are Good Making Videos! Dont Stop.
Can you please do Kodi ! Love the content though keep it up
Możesz zrobić film z jakimiś ciekawymi wydrukami na Halloween?
Nice video! the ghost with legs is really funny to me, just imagining some unsuspecting person picking up a cute little ghost figure and then bam! secret legs!
hilarious
also, i would be ecstatic if you printed out my name! (Elizabeth)
This is like those magnetic ball vids, likeasmr but it's actually good
I loved all of the 3d prints, and you defintly earned youself a million dollars(sad that i don't have).
Thank you :) Hope some day I could earn 1 million $ ;)
Can you please do DICEMISTRY? This is my fourth time asking. Please
I’m gonna start asking him to do it to double the odds we got this
@@yagamerboichucc6120 yes! We can do it!!!
What is that?
@@Draconic404 Idk but join the gang we just gonna keep asking him to print the word Decemistry until he does
It needs to be asked 96 times including 7 times for 4 consecutive Fridays. After that special symposium takes place that will monitor regular requests from 10.000 users on regular basis in agreen calendar. It is similiar to religiin. After that when you give all your time you will get nothing.
The guy with the shiney filament hehe
Can you please do tugboat I’ve asked 5 times! Love the content though keep it up,
my name is elliot and i love your videos so much
Me encanto todo... voy a tener que imprimir algo de todo eso, el fantasma lo tengo pendiente para impresion....pronto lo voy a hacer. SAludos desde Argentina....
Very cool prints!
Thanks :)
Woow Super cool 3d prints, Keep it up
Thanks :)
Wow its cool prints
Thanks :)
7:25 Great choice for the book :D
Thanks! BTW Alberto Angela is one of my favorite author :)
Like it a lot most of all the ghost with legs...
Could you do "Puteam"
Nice prints 😊
Thanks :)
Il libro di Alberto Angela ti ha tradito 😁😂😂😂
3D3D3D3D is my favorite thing!🎉
If you want a challenge you should print dicemistry someone else asked for it and I think you should do it fr them
You could also print the balls out on a resin printer as complete spheres.
Hi, what settings are you using in the slicer, and what z offset, the prints came out really nicely
0.2mm QUALITY in PrusaSlicer
Great video! I love the S1 Pro! What silk purple filament did you use for the demon bookmark? Thanks!!!
Thanks :) This is Creality Silk Purple PLA
What is the setting for the Creality Silk Purple PLA, I just printed out and it glued onto the Ender 3 bed...sigh
thinking of getting a ender after this video
It's really good 3D Printer :)
Can you do Dahen please
I’ve tried a few of these prints. The more I try them, the more I realize this guy has his printer dialed in 10/10. I can’t get many of these to work right.
Yes, good and well dialed 3D Printer is crucial. I also recomend to use PrusaSlicer. Good luck with your 3d printing 🙂
Can u make a video for the anycubic cobra
this is possible because the ladder is vertical and the slide is horizontal.
Loved the cat especially - so simple and so .. eh.. perfect 🥰
I'm new to 3D printing. Could you get the same quality with the standard Ender S1 or do you need to have the Pro? Thanks
I never used standard Ender S1, but I think the quality should be similar
Hello Cool edit and nice items
Thanks :)
Oscar is the name
These are pretty cool, but could you do some awesome star wars prints?
Maybe not full video about StarWars but I think I can make some prints in one of the next videos :)
Hej, deine Prints sind echt Super, gerne würde ich den Namen
DEKO-SERV ausdrucken, das wäre mega.❤
Share your support settings on pumpkin please
I have 3s1 pro! I think its VERy good printer
Yes, it is :)
Qual filamento voce esta usando? E quais especificações?
dude! Its my name!!!
These are really cool!
Thanks :)
RANDY!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! and how do buy it ?
Do you think you could make a 3d printed lightsaber from star wars jedi fallen order?
Cool. Thanks
where did you find the ball machine?
Amazing printer! Thank you for sharing!
Could print my last name?
IXTA :)
can you print “unintoxicated" for me plsss
Can you 3d print Mr.Peeperson as the your name print
Kacey or Surge, please?
Can you please print VaperSithLord?
Ples do SultanSkip ❤ love yur channel
Do you print mostly at 0.2 quality ?
Yes, 95% off all my 3d prints is 0.2 quality
Hey love your videos, just wanted to ask what slicer do you use?
Thanks :) I use PrusaSlicer
@@Marc3DP Thanks!! will start using it!
your videos are cool
Thanks :)
Can you 3D print a skeleton hand for me pleasezzzzz!
Nice!
Please do William Afton!!!!!!!!
Please can you share stl for name Valentina and Bosco? Thanks!
Amazing 🤩 👍👍👍👍👍
Thank you :)
Can you please do Azrael
Great vídeo.
What is that squared light you used?
Thanks :) It's Ulanzi LED VL49
Intro: 0:00
The ball machine: 0:13
Skeleton hand: 1:51
Tetris balance: 2:35
Impossible slide: 3:38
Pcbway: 4:02
Impossible slide continue: 4:28
Electronic brain: 4:41
Halloween pumpkin: 5:12
Moloch horridus: 5:57
Peeking cat 6:35
Bookmark demon hands: 6:57
Ghost with legs: 7:40
Your name: 8:08
Maybe he will print one of my designs also hehehe.
How do you split up the ball machine for printing?
Great!!
If you accidently step on that Moloch Horridus
How did you get your print out from the bed so easily??? May I know your setting? Thank you.
I use 0.20mm QUALITY settings in PrusaSlicer. Moreover it is thanks to the Ender-3 S1 Pro sheet. When it cools down, the prints practically go away by themselves
Am I missing something? how is it those gold balls are acting like magnets? Anyone tell me?
I stream on Twitch as theonetruefester and would love to see Fester printed out. Would give you a more unconventional name to print!
Could you do the name “Levi”
How do you get your prints to stick properly without using glue ? My bed is level and heat bed temp is fine .
I use Prusa and Creality PEI sheets and in both there is no need to use any glue.
Thanks for your reply , also in your earlier comments before you replied to mines , I tried the prusa slicer but the Z comp tends to probe the bed before it prints and sometimes it Z offset raise while printing and cause the filament to “noodle” up . Is that a settings to adjust ?
Could you print with a prusa
Hi, what do you recomanded please? I hsve ender 3v2, but i have a new, biggest printer. and i can not decide witch one. Do you recomand me the Creality CR6-SE, CR6-MAX, Ender 3s1 plus/pro or the anycubic kobra plus? Thank you
*want
I have only used Ender-3 S1 Pro from these 4 printer , but I'm very happy with it and I can condifently recommend it :)
Can you please share the link for this hand model?
All links to files are in description :)
Mon Cheir
Hello, I would like to print the first name of my nephew and niece, Batiste for my nephew (there is no "p" between the a and the t,, that's what his parents named him) and for my niece Meï Ling or Mimie his nickname. Thanks in advance
Can u print riley
Make a captain America action fighter
Maybe in near future I will make some action figures :)
Hi :) I wanted to print : Upgraded Living
Can you send me a file for the slicer 🙄
I like your video great Ideas 😊
Pls 3d print Mr. Hee Hee
Can you make a PlayStation 5
I want one,but I don’t have 3D printer
Name:pep
Omg where do you find the file for the ghost I can't find any
All links to designs are in description :)
Crimson
Could you please print the name BethAnne?
Jaswanth
Could you print "STayl" as a nickname?
Could you print the name Renata?
I have the S1 pro now for 1 month. Nothing sticks to the the Bed. I have to use blue tape the whole time to print at all. Can you give me a tip ?
I started wiping the springform bed with rubbing alcohol before every print, this helped out a ton. Also, using a brim setting for warping and adhesion helped.
For me it's sticks great. I use Isoproponal alcohol before every print. Also you should check if printer is dialed well. And finally I use PrusaSlicer.
Yes defiantly use Isopropyl Alcohol after/Before every print I use ISOCOL RUBING ALCOHL .
@@Marc3DP
can you 3d print Liam? please!
Bobby
3D🎉😊👍🏻🙏
Where I can download the files from the hand bone
All links to files are in description :)