I really appreciate you featuring my “Mechanical Hearth” in your video 5:09 .Highlighting the work of various creators is fantastic. And I can clearly see you put effort into making these videos. Is there a possibility to include credit for the creators of the models directly in the video?
Your "Mechanical Hearth" is amazing design, keep it up 🙌😀 For now all credits for the creators are in video description but I will think about your suggestion. Also I wish you all the best and many new fantastic designs in 2024 🙂
Well to be fair, most people are watching this video to find items ro print and the creator mentions the description in the video. So by having many people go to the description, it shows that they are crediting@@whackstro5184
Dear Sir, your models are really exceptional! All very perfect! But what is your secret? Maybe the use of several very expensive printers? How do you get such perfect spheres, even on the bottom side? I noticed that you use a lot of silk threads, which would cause a greater printing problem, and instead your pieces come out perfect anyway! I also noticed that all the little connectors you created never break when you fit them together! How is all this possible? Most of mine always break!! What slicer do you use? I use Simplify3D and Cura and I think they are up to the task, but despite several years of use and having also changed the type of threads, even more performing, I can't get this excellent quality that you are proposing! My printer is a simple Anycubic Kobra, the first model with a touch screen. It prints well but I can't make perfect models like yours! Please, tell me your secret!!! 😄 I noticed that your supports come off extremely easily, how do you do it? I understand that sometimes it is not just a question of temperature but also of the quality of the wire. Some come off better than others, etc... But you surely have another method for this! Moreover, how do you get such a smooth and perfect support surface which rests immediately before the piece support? Then, how do you have such a clean print bed, with such perfect pieces on the support base? Why, even though I am struggling with my probe that reveals the magnetic plate, I can't calibrate my plate properly? If I adjust the screw of the probe to the right point and also do the automatic calibration, unfortunately the pieces still come off the plate and therefore I am forced to put a lot of glue on the plate and lower the height level of the probe by a few tenths. Have you ever replaced these magnetic plates? How long do they last over time, after several uses? The PEI patina wears out sooner or later, right? It seems to me that it has almost worn out at the first uses and therefore I am forced to put glue on it anyway. I have changed many plates, in classic glass, tempered glass, PEI plates, etc., but the problem occurs the same. I preheat my plate to 60 degrees maximum, perhaps I should increase it by a few degrees more to obtain stability of the piece? That's all! Thanks in advance! 🙂
Thank you for your detailed and thoughtful comment! 😊 I appreciate your kind words about my prints and designs. Let me try to address your points and share my perspective. Yes, I do use some high-end printers like the BambuLab X1 Carbon, but I also work extensively with more affordable options such as the BambuLab A1 and A1 Mini. These budget-friendly machines deliver impressive results, and I’ve found that quality prints aren’t necessarily about having the most expensive hardware but rather choosing a modern and reliable printer. For example, the BambuLab A1 costs around $400-450 and handles most of the challenges you described with ease. As for slicers, I mainly use BambuStudio because I primarily work on BambuLab printers. I don’t tweak too many advanced settings-I mostly stick to the pre-configured profiles, which are well-optimized and reliable for different materials. The slicer profiles often make a big difference in getting great results without needing to adjust too much manually. About your Anycubic Kobra: I had the Kobra 2 Pro in the past, which is also a budget-friendly printer, and I was able to get good results with it. If you’re looking for smoother workflows and fewer headaches, I’d highly recommend considering a BambuLab A1 as a next step-it’s affordable, fast, and consistently delivers high-quality prints without the struggles you mentioned. Keep experimenting and don’t hesitate to reach out with more questions-happy printing! 😊
@@Marc3DP Dear Sir, thank you for your reply and especially for your advice on purchasing the Bambulalb A1. In fact, I was thinking that my next purchase could be this one or alternatively the Anycubic Kobra 3 combo. The problem is that I am now happy with the following slicers: Cura and Simplify 3D which I paid a few years ago, 140 dollars and then 60 dollars for the update to 5.1. Although I must admit that Cura performs better. Simplify is very well made and full of settings and is also refined in the graphic aspect but it is one point less than Cura, regarding the print quality. I have never tried the other slicers! I have always thought that to obtain a higher quality it is not just one thing to consider, but many, such as the quality of the printing wire. I noticed that since I started using brands like Overture, E-sun, Sunlu, I feel much better than before but unfortunately I still don't get those fantastic results that you and other makers get here in your videos. Which brands of filaments would you recommend me to buy? Going back to the Bambulab A1/Kobra 3 issue, another big problem of mine is that I don't trust extruders with a motor far from the seat. I've always preferred direct extruders because of jamming. Do these two types of printers still risk jamming, having the motors far away? I also ask because they have different outputs for each color... Furthermore, I've never been attracted to devices that have their own closed internal system like Apple, I prefer a more modifiable open source type printer. Proprietary software and settings like in Bambulab don't appeal to me much but I don't question its quality, given what you can get! I also create toys like you and I need to have pieces that don't break, especially in the joints and pins. I was also wondering if you know how to get the "no-planar" effect in the most common slicers. Unfortunately, this fantastic option does not exist yet in the slicers I use. Is there one in yours on Bambullab? Thank you and see you next time! :) bye!
bambu lab x1 is probably the best printer on the market at the moment, crealitys printers are basically just trying to make other printers as cheap as possible. they are good for how cheap they are, but if you have the money...dont even question it dude i would kill for a bambu lab x1 carbon dont even hesitate..
I notice that there is a perimeter line around model on print plate. How do you do that. Is it a setting on slicer, or is it your printer that causes that. I am using Bambu slicer with P1S. If it’s the slicer, which slicer are you using. Thank you. Tony
I'm not exactly sure which print you're referring to, but it sounds like you're talking about the "skirt." It's something that can be set in any slicer. I use Bambu Studio, and you can adjust the skirt settings there as well! Let me know if you need more help with that.
What would happen? You will create action figures like from Disney Infinity like from other franchises (non-Disney) If I mean characters like: Rexy, Spino, Blue, Therizinosaurus, Giganotosaurus, Toro, Bumpy, Indominus rex, Indoraptor, Scorpios Rex, Po, Master Oogway, Shifu, Tigress, Crane, Viper, Monkey, Mantis, Tai Lung, Lord Shen, General Kai, Sherk, Donkey, Puss in Boots, Gru, Vector, Lucy, El Macho, Dave (Minion), Kevin (Minion), Stuart (Minion), Bob (Minion), General Kai, Optimus prime, Harry Potter, Batman, Hellboy, Captain Marvel, Omni-man, Superman, Flash, Wonder Woman, Wolverine, Deadpool, Manny (Ice age), Diego (Ice age), Sid (Ice age), Scratt And among other characters that you can think of
@@Marc3DP hey I borrowed a canon eos r from a friend but it stops recording after 30 minutes? I heard that is normal on some canon cameras, does m50 has the same or did you bypass it somehow?
Hi, could you give me a link to marlin with free access? since I live in Russia and from my country it is impossible to pay for access to many sites(((
@@Marc3DP mi tez sie to wydawalo dziwne i na poczatku tpu mi sie tez tak paliło. Gosciu dal mi rade wlasnie zeby dac predkosc nizsza bo tpu za szybko nie lubi ale 214 mi powiedzial zeby puszczac i tak mi idzie lux
And you can desire man on a Freddie printer. Can you just buy Durham and Spider-Man? Because heid1878 s my friend superior we will see if you can to inspire make Iron Man. And you can make that video.
Jesus loves u!! He’s ALWAYS there for u, never forget that!! ““For God so loved the world, that He gave His only Son, that whoever believes in Him should not perish but have eternal life.” (John 3:16 (ESV)) Amenn
Can you please give me the free improves bar poo poo poo poo poo poo. Poo a poo poo please please please please please please pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee Spider-Man please Spider-Man or whatever spider spider I don’t care you can decide for me
Promoting Trump stuff...that’s going to be a thumbs down, unsubscribe, and do not recommend channel. I can’t support someone that supports a person that tried to over throw my country’s democracy.
If you are looking for unique models, check my designs store👇
cults3d.com/en/users/MadiStudios/creations
Me dá uma dessas pessoinhas aí para mim é aqui na casa 10
Junto
The chicken one was really cute!
@FrancisBonnevie-kk8iothere’s only one
@@elijahanderson4525 no shit
I really appreciate you featuring my “Mechanical Hearth” in your video 5:09 .Highlighting the work of various creators is fantastic. And I can clearly see you put effort into making these videos. Is there a possibility to include credit for the creators of the models directly in the video?
Your "Mechanical Hearth" is amazing design, keep it up 🙌😀 For now all credits for the creators are in video description but I will think about your suggestion. Also I wish you all the best and many new fantastic designs in 2024 🙂
@@Marc3DPIt's a bit dishonest to only have the credits buried in the description. The answer should be "yes", not "I'll think about it."
Well to be fair, most people are watching this video to find items ro print and the creator mentions the description in the video. So by having many people go to the description, it shows that they are crediting@@whackstro5184
Very creative, if I had a 3D pirinter I would make these :)
Thanks :)
I love your work great job !!
Thank you 😄
THIS CHANNEL IS WONDERFUL
Thank you 😊😀
Really good video! I love your work!
Thanks 😀
Your the best Buddy, Thank you for great print and hours of fun👍👌✌
You're very welcome! I'm glad you're enjoying the prints 😊😀
Love the chicken fighting arms! Haha!
Awesome stuff!
Thanks :)
Sure thing :D
Many great models that spark my creativity, a very valuable channel for me.
Thanks Tommy 😀
4:33 cool mark robber gun
Creative 👍
Thanks :)
This looks sick
Es impresionante quedé maravillado
Dear Sir, your models are really exceptional! All very perfect! But what is your secret? Maybe the use of several very expensive printers? How do you get such perfect spheres, even on the bottom side? I noticed that you use a lot of silk threads, which would cause a greater printing problem, and instead your pieces come out perfect anyway! I also noticed that all the little connectors you created never break when you fit them together! How is all this possible? Most of mine always break!! What slicer do you use? I use Simplify3D and Cura and I think they are up to the task, but despite several years of use and having also changed the type of threads, even more performing, I can't get this excellent quality that you are proposing! My printer is a simple Anycubic Kobra, the first model with a touch screen. It prints well but I can't make perfect models like yours! Please, tell me your secret!!! 😄
I noticed that your supports come off extremely easily, how do you do it? I understand that sometimes it is not just a question of temperature but also of the quality of the wire. Some come off better than others, etc... But you surely have another method for this! Moreover, how do you get such a smooth and perfect support surface which rests immediately before the piece support? Then, how do you have such a clean print bed, with such perfect pieces on the support base? Why, even though I am struggling with my probe that reveals the magnetic plate, I can't calibrate my plate properly? If I adjust the screw of the probe to the right point and also do the automatic calibration, unfortunately the pieces still come off the plate and therefore I am forced to put a lot of glue on the plate and lower the height level of the probe by a few tenths. Have you ever replaced these magnetic plates? How long do they last over time, after several uses? The PEI patina wears out sooner or later, right? It seems to me that it has almost worn out at the first uses and therefore I am forced to put glue on it anyway. I have changed many plates, in classic glass, tempered glass, PEI plates, etc., but the problem occurs the same. I preheat my plate to 60 degrees maximum, perhaps I should increase it by a few degrees more to obtain stability of the piece? That's all! Thanks in advance! 🙂
Thank you for your detailed and thoughtful comment! 😊 I appreciate your kind words about my prints and designs. Let me try to address your points and share my perspective.
Yes, I do use some high-end printers like the BambuLab X1 Carbon, but I also work extensively with more affordable options such as the BambuLab A1 and A1 Mini. These budget-friendly machines deliver impressive results, and I’ve found that quality prints aren’t necessarily about having the most expensive hardware but rather choosing a modern and reliable printer. For example, the BambuLab A1 costs around $400-450 and handles most of the challenges you described with ease.
As for slicers, I mainly use BambuStudio because I primarily work on BambuLab printers. I don’t tweak too many advanced settings-I mostly stick to the pre-configured profiles, which are well-optimized and reliable for different materials. The slicer profiles often make a big difference in getting great results without needing to adjust too much manually.
About your Anycubic Kobra: I had the Kobra 2 Pro in the past, which is also a budget-friendly printer, and I was able to get good results with it.
If you’re looking for smoother workflows and fewer headaches, I’d highly recommend considering a BambuLab A1 as a next step-it’s affordable, fast, and consistently delivers high-quality prints without the struggles you mentioned.
Keep experimenting and don’t hesitate to reach out with more questions-happy printing! 😊
@@Marc3DP Dear Sir, thank you for your reply and especially for your advice on purchasing the Bambulalb A1. In fact, I was thinking that my next purchase could be this one or alternatively the Anycubic Kobra 3 combo. The problem is that I am now happy with the following slicers: Cura and Simplify 3D which I paid a few years ago, 140 dollars and then 60 dollars for the update to 5.1. Although I must admit that Cura performs better. Simplify is very well made and full of settings and is also refined in the graphic aspect but it is one point less than Cura, regarding the print quality. I have never tried the other slicers! I have always thought that to obtain a higher quality it is not just one thing to consider, but many, such as the quality of the printing wire. I noticed that since I started using brands like Overture, E-sun, Sunlu, I feel much better than before but unfortunately I still don't get those fantastic results that you and other makers get here in your videos. Which brands of filaments would you recommend me to buy?
Going back to the Bambulab A1/Kobra 3 issue, another big problem of mine is that I don't trust extruders with a motor far from the seat. I've always preferred direct extruders because of jamming. Do these two types of printers still risk jamming, having the motors far away? I also ask because they have different outputs for each color... Furthermore, I've never been attracted to devices that have their own closed internal system like Apple, I prefer a more modifiable open source type printer.
Proprietary software and settings like in Bambulab don't appeal to me much but I don't question its quality, given what you can get! I also create toys like you and I need to have pieces that don't break, especially in the joints and pins.
I was also wondering if you know how to get the "no-planar" effect in the most common slicers. Unfortunately, this fantastic option does not exist yet in the slicers I use. Is there one in yours on Bambullab?
Thank you and see you next time! :) bye!
Delorean was EPIC
If you were with me you would be the best at giving me ideas of what to 3d print
bought the robot dog , awesome
Wear did you get the bacteriophage modle
Link in description :)
Ok
awesome video! any chance you can share links to the colors for the bullet puzzle? can't seem to find the same tones. thanks!
I used Eryone Silk Cooper and Gold PLA
The owl was off the chain
Awesome ❤
Thanks :)
That's so cool
Thanks :)
so cute~
What filament do you use? It all looks so shiny😮
It's SILK PLA
Robot dog super ❤
Hey men i have a k1 max but i cannot print as good as you did. Can you share slicer profile please? Love this videos ❤
I use OrcaSlicer with K1 Max profile settings
My ender 5 pro prints better than this tbh
13:45 is my favorite!
Hello, I am torn between the BAMBU LAB X1 model and the Creality K1 model. Which model would you recommend me and why?
bambu lab x1 is probably the best printer on the market at the moment, crealitys printers are basically just trying to make other printers as cheap as possible. they are good for how cheap they are, but if you have the money...dont even question it dude i would kill for a bambu lab x1 carbon dont even hesitate..
😂bambu lab x1, have no doubts, colorful and high-quality images, k1 is good, but not enough not even close and does not print in color.
Spot!
Hey man, really cool video. Where do you get your music from for the videos?
Thanks 😀 the music is from RUclips Library
I notice that there is a perimeter line around model on print plate. How do you do that. Is it a setting on slicer, or is it your printer that causes that. I am using Bambu slicer with P1S. If it’s the slicer, which slicer are you using. Thank you. Tony
I'm not exactly sure which print you're referring to, but it sounds like you're talking about the "skirt." It's something that can be set in any slicer. I use Bambu Studio, and you can adjust the skirt settings there as well! Let me know if you need more help with that.
Tienes una tienda donde vendas estás creaciones
El lanzacohetes debería tener mas fuerza. Lo que pasa es que se rompe creo, sale mal o no sé qué y al final deja de tirar fuerte.
Trump mugshot night light!
That could be my favorite thing in the world.
What would happen? You will create action figures like from Disney Infinity like from other franchises (non-Disney) If I mean characters like: Rexy, Spino, Blue, Therizinosaurus, Giganotosaurus, Toro, Bumpy, Indominus rex, Indoraptor, Scorpios Rex, Po, Master Oogway, Shifu, Tigress, Crane, Viper, Monkey, Mantis, Tai Lung, Lord Shen, General Kai, Sherk, Donkey, Puss in Boots, Gru, Vector, Lucy, El Macho, Dave (Minion), Kevin (Minion), Stuart (Minion), Bob (Minion), General Kai, Optimus prime, Harry Potter, Batman, Hellboy, Captain Marvel, Omni-man, Superman, Flash, Wonder Woman, Wolverine, Deadpool, Manny (Ice age), Diego (Ice age), Sid (Ice age), Scratt And among other characters that you can think of
where can i find the stl filles for the t rex
Hi there, what is the model for the robot with the sword at 8:42 on this video?
lucky 13
Lucky 13
So which 3d printer is the best ?
My favorite is Bambu Lab X1 Carbon 🙂
""Safe from the rain" (umbrella) is not available at that link 😞
Wooo hoo3D
By the way what 3d printer do you use
its mentioned on the vid
I use couple of printers, mostly Bambu Lab X1
8:44 where can ı find the figure?
which 3D printer do you use!!
Mostly BambuLab X1 Carbon, A1 and A1 mini. But somotimes I also use others like Qidi, Creality, Anycubic.
WHAT WEBSITE DID YOU FIND THE SPOT ROBOT DOG
Try “thingiverse”
Did you even *look* at the description?
Ineed t rex holder❤
No se puede descargar el perro robot. Yo quería hacer la prueba con eso. Si alguien podría compartir los stl del perro robot porfavor.
What camera and microphone do you use? 😮😅
Canon m50 and Blue Yeti
@@Marc3DP hey I borrowed a canon eos r from a friend but it stops recording after 30 minutes? I heard that is normal on some canon cameras, does m50 has the same or did you bypass it somehow?
Um how does the wind up car move 😮
That gun looks like from mark Roger ngl
Ya it does 😊
Bro who farted 😂😂😂😂😂😂😂 0:03
😂
In my country is 2 days for new year
Happy New Year 😀
1:39 head mold
ah yes the tower of lincon XD
are you from poland
What are some good printing ideas to make profit off $$$ 14:37
Hi, could you give me a link to marlin with free access? since I live in Russia and from my country it is impossible to pay for access to many sites(((
Sorry I can't, design not belongs to me
15:56 TDS god it infects everything
13:45 CORONA VIRES
"honey what are you eating?"
Me:"phage poop"
Time stamp:14:08
T-800 ??
Wow 8 min ago
It 8 hours for me
No offense, but I don’t think I want my candy coming from a virus
😄
well your choice, my opinion still kinda cool though
Bacteriophage doesnt affect humans tho. It only kills bacterias like an automatic missile.
Besides, bactireophages aren't viruses. Their bacteria 0:56
It’s better than a virus coming from your candy
To tpu wyglada jakby mialo za duza temperature. Ja tpu drukuje w 214 stopniach i idzie lux. Scianki eleganckie jak z pla
Dzięki za radę, spróbuje w niżesz temperaturze następnym razem. Pozdrawiam i wszystkiego dobrego w Nowym Roku 😀
@@Marc3DP mi tez sie to wydawalo dziwne i na poczatku tpu mi sie tez tak paliło. Gosciu dal mi rade wlasnie zeby dac predkosc nizsza bo tpu za szybko nie lubi ale 214 mi powiedzial zeby puszczac i tak mi idzie lux
I love se spot robot dog can you give me the spot robot dog please
4:46 wth
It was all funny stuff until I saw ROCKET LAUNCHER TOY
Stlflix? Lol
bro stoled the gun from mark rober 💀💀💀💀💀💀💀💀💀
x
in the duck one MY 5 YEAR OLD SISTER WAS WATCHING 😭😭😭😡😡😡
womp womp
You mean you
Why do you still use the raise riggy (i think that’s the name) pfp?
She shouldn't have had the electronic
Muito bom!
Mas, a do Trump foi uma bosta kkkk
Dad will take like 38 hours or something
RE the owl model, Dont use LED's wound up like in the video, THEY WILL BURN OUT!
I need gun
Can you 3D print my name (Elrik)
besides that the tyrannosaurus skeleton is inaccurate its T.rex not "T-Rex"
Seeeeèeeeèeeeeèeeeeeeeeeeeèeeeeeeeeeeee🎉🎉🎉🎉😢
No offense but you are very bad at posing action figures 2:22
Then Trump nightlight cover had me 💀
And you can desire man on a Freddie printer. Can you just buy Durham and Spider-Man? Because heid1878 s my friend superior we will see if you can to inspire make Iron Man. And you can make that video.
Id love to have Trump watching me while I sleep (no I'm actually serious)
Ayo?🤨🤨🤨🤨
Jesus loves u!! He’s ALWAYS there for u, never forget that!!
““For God so loved the world, that He gave His only Son, that whoever believes in Him should not perish but have eternal life.” (John 3:16 (ESV)) Amenn
What year are you in I'm in 2025
2003
👇
Spot robot dog 1:23 I liked. Sadly, I do not have a printer.
No ❤ mechanical😡
🫨
Trumps gonna haunt you in your dreams
😂 🎉 like for Trump 😂🎉
man, please STOP TALKING ABOUT POLITICS
Cool? Maybe.. But Useless - 100%. 3D TOYS...
Can you please give me the free improves bar poo poo poo poo poo poo. Poo a poo poo please please please please please please pleaseeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee Spider-Man please Spider-Man or whatever spider spider I don’t care you can decide for me
The gun idea is stolen from Mark Roder
Promoting Trump stuff...that’s going to be a thumbs down, unsubscribe, and do not recommend channel. I can’t support someone that supports a person that tried to over throw my country’s democracy.
Americans 🙄
LOL it’s Trump’s mugshot. How do you interpret support or non-support from this?! Maybe he is trying to make fun of him. So quick to conclusions.
Sorry you feel this way, but It's not political and I don't support Trump. I'm from Europe and for me it's just funny there are 3d prints like that
he didnt try to overthrow our democracy anyway lol
Cry more.
99% unusefull trash
Not everything has to have a use, dude.
Thanks. I also have a channel @fusionfundamentals and sometimes need some music