Mine came yesterday morning and I still haven’t had the nerve to unbox it… I’m afraid I’ll break it. But I was so excited that I ended up buying colors of PLA prime and PETG that I wanted but definitely weren’t my first choice, so I’m going to try to get up the nerve to open it tonight since it’s finally Friday lol. 😂 SO excited to try the PETG because of its flexibility! I see blue rubber ducks in my future lol. 😂 Got ana awesome deal on some Coex brand filaments and found out they’re actually better than the anycubic filaments, BUT they were 50% off $40 a kg so I had to get them.
@@Everydayytber I'm very sorry. :/ I was in the process of moving and was very busy, so I couldn't respond. During this process, I got my finger caught in the trunk lid of my car. It was really painful. Thank you very much for asking and showing concern. :)
I have the same printer but you seem to have great adhesion. Are you using an adhesive and is that the Matt the Ender comes with or a better one that you purchased separately. Thank you for the video.
Cc triton l’a starting out in 3D printing and I have the same 3D printer as toi the Ender 3 s1 and l wanted to know if you could give me your file for phone support time l’apse hang at the printer you showed in your 3rd vidéo 😊
You can reach the relevant models from the link here.Also, in my first video, I mentioned how to make a timelapse. :) www.printables.com/model/570133-ender-3-s1-timelapse-rig-for-iphone-earpods/files
I wanted to know if you still have the file of your very first video I'm talking about the foot that holds the smart phone to take video and photos if not it's no big deal I'd try to do it myself.
Can anyone help me out with 3d printing ...im about to buy one for one specific thing cause i have a good idea but have no clue how to use one or even been around one
@@a2xdict071zero you will need a slicer program for slicing .stl files into gcodes idk if there is any on android but im sure it is easier with a pc also if u won't buy a printer that is able to print over wifi you will need to send the gcodes using sd cards
Mine came yesterday morning and I still haven’t had the nerve to unbox it… I’m afraid I’ll break it. But I was so excited that I ended up buying colors of PLA prime and PETG that I wanted but definitely weren’t my first choice, so I’m going to try to get up the nerve to open it tonight since it’s finally Friday lol. 😂 SO excited to try the PETG because of its flexibility! I see blue rubber ducks in my future lol. 😂 Got ana awesome deal on some Coex brand filaments and found out they’re actually better than the anycubic filaments, BUT they were 50% off $40 a kg so I had to get them.
man,,, had to leave... music ....
Scanning your dash was a genius move!
Love that fillament!
I feel the pain from your blue nail
I know I asked him about it and same with other people and he never responded
@@Everydayytber I'm very sorry. :/ I was in the process of moving and was very busy, so I couldn't respond. During this process, I got my finger caught in the trunk lid of my car. It was really painful. Thank you very much for asking and showing concern. :)
I wish it never happened, but I can still say I got. :)
Your all gods I feel you moving is a pain
Good not gods
Great idea 👍👍
Keep going
amazing thank you! what software do you use to scan?
Круто. Подскажи модель принтера!?
I am currently using two different printers.One is Ender 3 S1 and the other is Ender 3 V3 KE. :)
İs your Finger ok
I have the same printer but you seem to have great adhesion. Are you using an adhesive and is that the Matt the Ender comes with or a better one that you purchased separately. Thank you for the video.
I bought the bed separately later on. I really recommend using a PEI mat; it works great. As for adhesive, I use the green Bic glue stick.
6:17 caseoh when he is called kevin duranch
10:28 min Why do you use the Pliers at the bottom is a hole 😂✌️
Cc triton l’a starting out in 3D printing and I have the same 3D printer as toi the Ender 3 s1 and l wanted to know if you could give me your file for phone support time l’apse hang at the printer you showed in your 3rd vidéo 😊
You can reach the relevant models from the link here.Also, in my first video, I mentioned how to make a timelapse. :)
www.printables.com/model/570133-ender-3-s1-timelapse-rig-for-iphone-earpods/files
@@TritonPrint3D thank you very much for the files and you video which are sublime
I wanted to know if you still have the file of your very first video I'm talking about the foot that holds the smart phone to take video and photos if not it's no big deal I'd try to do it myself.
@@Air_print I didn't print it, I bought a tripod from Amazon and use it as a stand.
@@TritonPrint3D ok no problem thank you for helping me in my new conquest. continue, you're video, she's the best😊
Hey, i wanted to buy stl file of yours car phone holder. Is it possible?
Please give us stl file of Dyson blowing nozzle 13:40
What app did you use for scan?
Can anyone help me out with 3d printing ...im about to buy one for one specific thing cause i have a good idea but have no clue how to use one or even been around one
Do i have to have a computer or will mt 22 ultra be able to do anything ...i have nooo clue
@@a2xdict071zero you will need a slicer program for slicing .stl files into gcodes idk if there is any on android but im sure it is easier with a pc also if u won't buy a printer that is able to print over wifi you will need to send the gcodes using sd cards
Well I recommend a banbu lab printer if your on a budget the a1 or a1 mini are good printers costing between $300-$600 but it is so worth the price
@@JoLennon ur the first to give me any advice...thank you
Ouch!
9:26 я это печатал - не работающая застревающая и ломающейся при первом же повороте хуйня.
Подборка бесполезного барахла.
I only EVER print actual functioning and used parts. End that benchy bee ess NOW.
Bad printquality overall…….-
Big deal
Bad comment quality overall
@@PH5hundredlol, true
That's what you get with creality
Написано "Полезные 3д принты". Из полезных там разве что ножик, скребок и может еше пара. Остальное - хлам декоративный.
15:37 what's name app when you use for scanning 3d?
Polycam
Thanks for portable soldering tool stand idea! This may be really useful!
You are welcome
Fidget toys are kind of the opposite of useful...
Hi man :D
What scanning app do you have ? :D
I can't wait for myn I'm so excited to try this
15:32 did u accidentally eyes reveal. Nice video too btw
The car phone holder is INSANE. Do not do this.