At 4:22 a very important step might be missed. It is how he establishes wash out in a flying wing. This is not necessary in a normal wing. Very good Numa.
Excellent Numa. I've been using 6 mm sheet foam (Orange County California) for several years (after 40 years before that using hot wire foam). I picked up lots of tricks watching your video. Thank You so much for putting this video together. I find sheet foam makes a pretty nice airfoil without ribs; just the spar. I scribe a notch in the foam on the inside of the leading edge, but I'll try your straight edge method. I didn't know you can use an iron on packaging tape. I'll try that. I use 64th ply a lot to strengthen extended sheets of foam and 1 cm strips on the surface of the wing to make the flange part of a spar.
what store are you buying the 6mm foam from and what is it originally used for, all we have at home dumpot where i live is that thick pink insulation crap which works great if you want to do the whole airfoil thing but that's way too much work and takes way too long.....
great job on the build! As an experienced pilot, I noticed you did not say anything about the CG of the plane. for beginner fliers, CG is the most important thing they need to know.
и еще вопрос по управлению. настроил в аппаратуре элевоны.но создается впечатление что стик как будто на управлении повернут на 90 градусов.делаю стиком лево-право рули поднимаются опускаются, от себя-на себя рули право-лево. сервы стоят как у вас. или вы реверс одного из каналов делали?
Hello Numavig. One year later would you redo the Flying Wing exactly like that, or meanwhile do you got ideas for improvement? By the way, thank you for all your posts, calm videos without music, light weight constructions, I so much appreciate them.
Hello Friend. You inspired me a lot with this project. I will build this model according to your instructions, but I have a question, why do you put a felt-tip pen while closing and gluing the wings? is this to change the angle while drying? Are the volatile properties better then? I take this project very seriously and hence my question. Regards and we will be in touch.
Дядь, очень клево, особенно если учесть, что ни малейшего куска карбона... Только вот вопрос, это такая тема типа собрать из максимально какашного всю электронику? и где полетник и фпв?
You need to invest in one of my man’s adjustable hot wire saws for cutting poly foam, and plastics, it can cut wing profiles, duplicate contour and scaled reductions ( all depending on individual setup ) complete component cuts with one pass, and produce 100% factory quality slightly hardened or heat tempered surfaces (similar to shipping foam surfaces or the finish on an epf toy) no sanding, he can also show you how to make it.
I am building my first scratch plane and I am having trouble figuring what foam to buy. Whenever I go into home hardware or Michaels and ask for depron or extruded polystyrene Nobody knows what I'm talking about, and I'm hesitant to buy normal 5mm foam board because in the video it shows you bending the foam and regular foam board just breaks when you try to bend it. Is there a special method to bend foam board that I don't know of or do I just need to buy a specific flexible foam board?
день добрый. вопрос с развесовкой. черно белый круг на раскройке это центр тяжести?. пробую ваше крыло но с мини будкой под экшен камеру и 4s bp 18650. 1400кв двигатель 2212 и проп 8060
Nice! A lot of effort with the ribbed wing though. These days i cut and glue my Flying wings for FPV with flat 6mm foam plates (depron) using KFM-2 or KFM-4 airfoils and cover them in tape. Builds really fast, flies nice and the planes are really, really, really robust.
Just want to know where you got the foam like that at ?????? Please post where and what and if ya can how much ... That's so rad ... Thanks Ed in Phoenix writes
блин . разбил .перепутал каналы. на 3 раз понял-вставил но почему-то воткнулся в землю все равно. на вашем видео с полетом на этом крыле в начале была надпись гиро стабилизатор и вы шатали влево-право и крыло отрабатывало эревонами. у вас полетник был?
Симулятор не могу для самолёта найти, для квадрика видел. А крыло я не совсем понял управлять чтоль. Я его на себя ручкой и чуть газа добавлял, а он вниз (
на местном форуме узнай кто где летает, пусть проверят центровку, оттриммируют, настроят расходы и экспоненту и научат летать, в комментах это сделать нереально
I did mein. The whole weight (with battery) will be a little more than 300g. On the plan, the 75cm wingspan is supposed to be 200g ! What the weight of yours ? Thxs !
Hi there is a slight difference between your weight and my weight your electronics my AUW is 110 grams more than yours ,will it still fly or do i have to make changes ...thanks
NumaVIG применил малярный скотч, все получилось)спасибо. Подскажите, а что то можно придумать с тем крылом которое у меня сломалось? крыло треснуло и я обрезал по линии изгиба. Может как то можно его слоями сделать, так как гнуть там уже нечего)
Hi NumaVig, nice vid. Excellent tutorial. Could you send a picture of the plastic wrap of the foam you used? Any chance you know if we can buy that online??
Nice wing And well made👍 (great job with the cover) Just why the hell are u putting the esc and receiver on the top?! --> Aerodynamics busted😅 Greetings from Switzerland
in the center it doesnt matter that much.you would get better results trimming the control surface trailing edges. let's say it was for simplicity reasons.
Thanks for video. But for beginner like me, see your flight test dont wanna try to build this wing, its too fast!!!! :)) I prefer to build your slow fly plane 1.8m wingspan.
Hello, first of all I want to congratulate you for your work and your sharing. I am a beginner and would like to try my first flight with your 1m wing, are there any alternatives concerning the engine or is it powerful enough? I already made a wing the pyth 700 but as I am not of experience of flight I did not stop crashing me.if you can advise me.thanks
@@NumaVIG ok thank you, so the motor indicated on the wingspan 1m plan I replace it with the MF1905 2400KV and suddenly for the propeller it will be the 8040 if I understood correctly. Again a question, and if I want to use my 3s batteries you advise me what. thanks again
@@NumaVIG a small return of the 2 wings that I made from your plan, the flight is very stable super on the other hand the 2 motors that you advised me burned after only 5 flights how it can be possible
На этом стоит 2S 600mA 39 грамм, подбирается по весу, чтоб центр тяжести не уплыл, лучше чуть нос затяжелить, чем наоборот, для 750 мм размаха подойдёт и грамм 50-80. Камера GoPro 7 но это другое крыло уже 1000 mm размахом, видео полетов позже выложу
@@NumaVIG Вот спасибо за оперативный ответ. Я планирую подобное крыло на 800мм, хочу как раз использовать 800maH (2S) 50гр и до 1100maH (3S) 80 гр, думаю как раз будет. Сначала хотел KESL 32 делать, но Ваше видео по постройке увидел и передумал. Ещё у Вас оклейка скотчем очень аккуратная, отлично. Ранее я делал Jupiter Duck (моя первая модель) полетел сразу, не смотря на то что никогда не летал, но всегда хотел крылышко, так что буду строить, в том числе благодаря Вашему ролику. Спасибо.
на больший размах нужно лонжерон более жесткий, обычно клеят деревянные линейки, я для 1000 мм на циркулярке напилил 1,5 мм шпон и приклеил его к пенопласту , и две нервюры центроплана тоже неплохо бы усилить на случай падений, на видео с краштестом это хорошо видно, там крыло 600 мм и весом 170 г , 4 мм потолочка в гармошку сложилась довольно быстро :-), на видео подложка 5 мм
@@NumaVIG Учту ваши советы, у меня подложка 5мм, тоже хотел в районе центроплана усилить и если честно, то всё таки хочу какой-нибудь фюзеляж сделать по д электронику. Ну и конечно лонжерон помощнее.
Really cool what is the skill level to fly this like? Im just starting into the hobby have piloted 3d heli but want a airplane thats not going to be a handful for a beginner tia💕💞
You can fly a 3d heli?! You almost have this plane thing down. Wings are easy to fly once tuned especially with the center of gravity. The only drawback for a beginner is that they don't return to level by themselves like a proper trainer type plane would. I would suggest trying out a plane on a simulator and learning it. Then get a trainer. But if your like me and want to start with a wing (I did haha) get an EPP wing TekSumo set it up light and start flying, you will crash alot but it should hold up very well. I'm still flying my original after many crashes and repairs and it's still a great flyer. Good luck!
@@greg0063 i have a spectrum tx 3s rx servos eflight esc and heading lock gyro from a blade sr but was trying to figure out how to use it for a plane the esc is designed to move all the servos collectively when throttling but the rx has Aux 1 Gear Rudder Elevator Aileron Throttle Battery Its the esc i don't understand how to use it has out put for brushles main motor ,tail motor ,rx,and heading lock gyro which has four wires to the rx 😖
@@terranovarain2183 it might be possible but unfortunately not probable. That radio has the dip switches under that front panel correct? You might be able to position them so the servos are mixed. This would be a long shot though. You need an elevon mix for a wing to fly properly. A modern computer radio will have it in there as a preset and it is easy to do. It also makes it easy to tune as far as expo and throws.
Hello! First of all, great work!! Build it exactly like you, but have a problem with CG! Need extra 117g in the nose to get in balance? What did i wrong??? Greetings from Austria
@@NumaVIG 1st thing 1st I appreciated ur great job and 2nd may I know what soft u used to design the wing and converted to A4 tiled version. It will help me to make my self and convet to A4 tiled version. Thanx and waiting Mate.
I may never get around to attempting one of your buildings, but I sure enjoy watching your videos. Very calming.
Thank you for this video. I used your design and made this plane myself. It flies really good.
Хорошая идея резать не по линейке, а по по уголку. Торец получается 90 градусов точно. Хозяйке на заметку. Спасибо.
At 4:22 a very important step might be missed. It is how he establishes wash out in a flying wing. This is not necessary in a normal wing.
Very good Numa.
Amount of washout required = 1 pen thickness at TE. Looks about right. |-)
NOPITY-NOPE-NOPE. BECAUSE, this is Not a true flying wing.
@@daviddavids2884 How is it not a flying wing? And if it is not, what do you think makes for a requirement that there is washout?
@@daviddavids2884 It is a 'flying wing' in that it's tailless. Are you referring to rectangular planform wings?
@@robinbeckford nope. REFERRING to the presence of VERT-STABS.
These techniques seems so retro after flitetest planes, love'em.
Damn dude they've got a cpu laser cutter. Anything seems retro comparing to a cpu laser cutter.
I like Flitetest too, but NumaVIG's planes are significantly lighter and more streamlined. A cada cual lo suyo.
They're different building methods with different materials with different end results. There's more than one way to skin a cat.
Excellent Numa.
I've been using 6 mm sheet foam (Orange County California) for several years (after 40 years before that using hot wire foam). I picked up lots of tricks watching your video. Thank You so much for putting this video together.
I find sheet foam makes a pretty nice airfoil without ribs; just the spar.
I scribe a notch in the foam on the inside of the leading edge, but I'll try your straight edge method.
I didn't know you can use an iron on packaging tape. I'll try that.
I use 64th ply a lot to strengthen extended sheets of foam and 1 cm strips on the surface of the wing to make the flange part of a spar.
what store are you buying the 6mm foam from and what is it originally used for, all we have at home dumpot where i live is that thick pink insulation crap which works great if you want to do the whole airfoil thing but that's way too much work and takes way too long.....
@@quadflopper1012 have you found any foam?
Fantastic video, so much more than just gluing, and the underlight to see spar outline, brilliant!
this is clearly the way to manufacture a wing out of foam board. well done.
great job on the build! As an experienced pilot, I noticed you did not say anything about the CG of the plane. for beginner fliers, CG is the most important thing they need to know.
CG in the plan
If I remember correctly the circle with the hour glass is the symbol for CG
@@NumaVIG Hello. I'm making the wing. Did you have to adjust precisely the positions of the battery/ESC/receiver to make the GC at the right place ?
@@cgyedblada291 only battery
5 mm
Oddest construction for flying wing.
Very impressive!
At 4:27, what was the purpose of putting the pen under the metal bar? Was that to add some dihedral to the wing?
Wing twist
Hello, fantastic job ! can you tell me the product you use to cover the wing ? A reference ?Thanks
www.google.com/search?q=colored+packing+tape
@@NumaVIG thank you so much !😊
how much foam you use in these plane
Please answer
I don't know what to say other than that you are surely an artist and your video production is a class act.
I'm shocked.
Thanks for the ASMR session
AAAhhh 2:51 attack my ear :-) by the way great job
0:26 ear irritation sonic weapon :-)))
good plane
It looks so easy when you built it. Beautiful flight especially the (slow mow).
what a fine build that is ! great piloting too, well done !
и еще вопрос по управлению. настроил в аппаратуре элевоны.но создается впечатление что стик как будто на управлении повернут на 90 градусов.делаю стиком лево-право рули поднимаются опускаются, от себя-на себя рули право-лево. сервы стоят как у вас. или вы реверс одного из каналов делали?
серву которая неправильно двигается развернуть реверсом
@@NumaVIG спасибо,значит верно подумал)
Hello Numavig. One year later would you redo the Flying Wing exactly like that, or meanwhile do you got ideas for improvement?
By the way, thank you for all your posts, calm videos without music, light weight constructions, I so much appreciate them.
no ideas for improvement, I think this design is already optimal
@@NumaVIG Indeed it does look perfect.
За стиль изложения и гост на этикетке проволоки - подписка. Спасибо.
Where can I get the 5mm Depron that is used in the video?
Google + "Polystyrene Foam Ceiling Tiles Panels"
Hello Friend. You inspired me a lot with this project. I will build this model according to your instructions, but I have a question, why do you put a felt-tip pen while closing and gluing the wings? is this to change the angle while drying? Are the volatile properties better then? I take this project very seriously and hence my question. Regards and we will be in touch.
en.wikipedia.org/wiki/Washout_(aeronautics)
@@NumaVIG Thank you very much for your answer. Reading was nice and explains everything. You are a professional. Thank you.
Great video! What is the white material inserted in the nose and at the back where the motor is attached on?
XPS foam
dude you are so good at this!!
i made a cessna from your tutorial, it did not fly
but still you are super good at this
Дядь, очень клево, особенно если учесть, что ни малейшего куска карбона...
Только вот вопрос, это такая тема типа собрать из максимально какашного всю электронику? и где полетник и фпв?
You need to invest in one of my man’s adjustable hot wire saws for cutting poly foam, and plastics, it can cut wing profiles, duplicate contour and scaled reductions ( all depending on individual setup ) complete component cuts with one pass, and produce 100% factory quality slightly hardened or heat tempered surfaces (similar to shipping foam surfaces or the finish on an epf toy) no sanding, he can also show you how to make it.
I am building my first scratch plane and I am having trouble figuring what foam to buy. Whenever I go into home hardware or Michaels and ask for depron or extruded polystyrene Nobody knows what I'm talking about, and I'm hesitant to buy normal 5mm foam board because in the video it shows you bending the foam and regular foam board just breaks when you try to bend it. Is there a special method to bend foam board that I don't know of or do I just need to buy a specific flexible foam board?
try to bend the foam on a tube like here ruclips.net/video/2WBJLjFvS9o/видео.html
it is paperclad foamboard. try a dollarstore? brands like, readiboard or ross. elmer's foamboard is Heavy. see flitetest's brand. googletranslate
I am looking to make one of these. Can you send me a link for the foam you used? Thanks.
Did you finally find? Lol
One hell of a clean build! 👍👌
день добрый. вопрос с развесовкой. черно белый круг на раскройке это центр тяжести?. пробую ваше крыло но с мини будкой под экшен камеру и 4s bp 18650. 1400кв двигатель 2212 и проп 8060
how much reflex do you have?
Can I use coroplast ?
This is amazing and I enjoyed it very much. Always looking forward to new adventures on your channel. Thanks very much! : )
Hey, If could only find a 36g, 40a esc, would that work?
read the specifications of your motor
Which method did you use for the paristic drag calculation
I'm trying to bend the wing but it just dosnt want to bend. How did you do it?
Nice! A lot of effort with the ribbed wing though. These days i cut and glue my Flying wings for FPV with flat 6mm foam plates (depron) using KFM-2 or KFM-4 airfoils and cover them in tape. Builds really fast, flies nice and the planes are really, really, really robust.
Link to plans or any build tutorials?
prosím z jakého materiálu je držák motoru a výplň čumáku?
I can't find the FOAM in my country
Just use dollar tree foamboard
Here in Norway it's hell on earth to find 5mm Depron. Is it ok to use 6mm?
For 1m is OK, for 0,75 m skin better 3 mm
@@NumaVIG 6mm is the only i can Find in my area :(. Do you have the plans for 1m? And Where do i put the balsa?
@@NumaVIG ohh wait, i found 3mm. But wont 3mm be to fragile, and will all the dimensions be the same?
numavig.com/plans/flying-wing/img/FlyingWing1m.pdf use 4x4 or 5x5 balsa for spar as an example, my last Warbirds
Just want to know where you got the foam like that at ?????? Please post where and what and if ya can how much ... That's so rad ... Thanks Ed in Phoenix writes
This foam from Leroy Merlin. Search for Depron or any other Aero-modelling Foam
sorry if i'm asking again or didn't pickup on it. What type of glue are you using for this?
UHU Por
You have both skill and Ideas bro. Thanks for sharing.
Very nice project What glue you are using?
ruclips.net/video/aS6ms6RPPlg/видео.html
блин . разбил .перепутал каналы. на 3 раз понял-вставил но почему-то воткнулся в землю все равно. на вашем видео с полетом на этом крыле в начале была надпись гиро стабилизатор и вы шатали влево-право и крыло отрабатывало эревонами. у вас полетник был?
на странице с чертежами есть ссылка на Gyro Flight Stabilizer
@@NumaVIG спасибо, надо поискать как его подключать. Я так понимаю без него летающее очень тяжело управляется
любой самолёт без навыков тяжело управляется, это не машинка и не катер
Симулятор не могу для самолёта найти, для квадрика видел. А крыло я не совсем понял управлять чтоль. Я его на себя ручкой и чуть газа добавлял, а он вниз (
на местном форуме узнай кто где летает, пусть проверят центровку, оттриммируют, настроят расходы и экспоненту и научат летать, в комментах это сделать нереально
Can you tell me what is the kit name of your that ****
Спасибо, чертежи очень кстати!! И урок по изготовлению супер !!!
А по 2-х метровому крылу - есть рекомендации по винто-моторной группе? мотор размер и КВ, проп, один мотор или два?
в комментариях кто-то делал 2-х метровый, надо у него спросить. Обычно взвешивают и подбирают по тяге
@@NumaVIG спасибо, понял.
I did mein. The whole weight (with battery) will be a little more than 300g. On the plan, the 75cm wingspan is supposed to be 200g ! What the weight of yours ? Thxs !
200g ( it's me wrote this plan)
This is the Best 10 minutes video ever seen : )
Здравствуйте, не подскажите, где ЦТ у данрого крыла?
Я не совсем только понял как совместить все листы воедино, края листов обрезать надо по линиям которые там указаны?
вот так ruclips.net/video/YhKvnSBbcZY/видео.html
NumaVIG спасибо большое! А ещё момент, не увидел а4 формата чертежа с размахом 75см, только на 1 метр есть, сможете приложить ссылку к описанию видео?
@@zhendos9191 масштаб при печати 75%
How can I get a plan copy. Do I put the url on a thumb drive and tell the print store to print it on A2 paper?
I think it would be better to download the file
Hi there is a slight difference between your weight and my weight your electronics my AUW is 110 grams more than yours ,will it still fly or do i have to make changes ...thanks
Hi, I kif your gear. I live in Toulouse, do you know where I could buy depron.
some info. at 9:30, the area and Mass of each vert-stab is excessive.
Bom dia gostaria d saber qual isopor é esse. Muito caprichada sua asa. Parabens
hi friend, do you have a name or a link to order the scotch tape you are using?
Google: colored packing tape
Neat building technique! What foam sheets are you using?
XPS 5mm
where to get electronic hardware to make this plane ?
new link in description with plans and electronics
Supa little wing,Great build.thx mark from the uk.
Print to scala ???
Very very nice, you are a real inspiration to build this aircraft myself. What camera did you use on the modell?
GoPro
Благостные ласкающие слух звуки резки пенопласта!
Can u plz name the airfoil used in ur vdo...and also the servo motor capacity...
Clark Y
Thank you..
Love that hot iron tape trick. Need to remember that
Nice one Numa. Thanks for the plans. Keep it up friend. It flies really well congrats !!!
What material did you used in 5:12 ?
XPS foam
wich camera did you use for this video ? thanks for all you share!
where are you from ?
Проклеил единственное я скотчем все изгибы и когда крыло прогибал почти сомкнулись они но резко треснула плитка... в чем могла быть ошибка?
ruclips.net/video/xdirvZz-NcA/видео.html и скотч малярный нужен, под обычным прозрачным чаще трескается
у плитки если посмотреть на свет иногда видны волокна, вдоль них гнуть не стоит, лучше поперек
NumaVIG применил малярный скотч, все получилось)спасибо. Подскажите, а что то можно придумать с тем крылом которое у меня сломалось? крыло треснуло и я обрезал по линии изгиба. Может как то можно его слоями сделать, так как гнуть там уже нечего)
@@zhendos9191 вы использовали ту плитку что в начале видео?
I have a problem.
Where will I get all of the things?
Online?
If you can give me the website link.
AliExpress
look for hobby e-tailers. dubro amainhobbies atlantahobby tammyshobbies horizonhobby etc etc etc; APC.com for E / E P propellers; NOT S F.
Alnado?
Hi NumaVig, nice vid. Excellent tutorial.
Could you send a picture of the plastic wrap of the foam you used? Any chance you know if we can buy that online??
colored packing tape
Nice wing
And well made👍 (great job with the cover)
Just why the hell are u putting the esc and receiver on the top?!
--> Aerodynamics busted😅
Greetings from Switzerland
Air cooling
The receiver??! 😂😉
I don't know, I haven't done a symmetrical airfoil
perhaps
in the center it doesnt matter that much.you would get better results trimming the control surface trailing edges.
let's say it was for simplicity reasons.
Great build! Thanks for sharing the idea!
What is the foil that you've iron to the foam?
usual packing tape
@@NumaVIG Thank you!
hello someone help me with the name where the arm of the servos in the ailerons connects
beautiful work.... what is the name of blue color foam you used...
XPS Foam
Thanks for video. But for beginner like me, see your flight test dont wanna try to build this wing, its too fast!!!! :)) I prefer to build your slow fly plane 1.8m wingspan.
Plain ka tharma col kaha se late ho bhiya
Hello, first of all I want to congratulate you for your work and your sharing. I am a beginner and would like to try my first flight with your 1m wing, are there any alternatives concerning the engine or is it powerful enough? I already made a wing the pyth 700 but as I am not of experience of flight I did not stop crashing me.if you can advise me.thanks
for 1m wing AEO MF1905 2400KV ruclips.net/video/nx8FPujGo4I/видео.html
@@NumaVIG
ok thank you, so the motor indicated on the wingspan 1m plan I replace it with the MF1905 2400KV and suddenly for the propeller it will be the 8040 if I understood correctly. Again a question, and if I want to use my 3s batteries you advise me what.
thanks again
@@NumaVIG
a small return of the 2 wings that I made from your plan, the flight is very stable super on the other hand the 2 motors that you advised me burned after only 5 flights how it can be possible
Very good video instruction.
What is the tape and glue you use on it?
packing tape and Titan Wild glue
what's the foam you are using for this project?
XPS
Really nice plane and works. Thanks a lot from Turkey. I have a question for you. Whats the max flight time ? Thanks again
slow fly 20-25 min , full throttle 10-15
Your commitment and precision are soo cool and nice,. Thank you for posting :)
Where did you buy the board, please?
Finally saw it bro. So when you used the pen and metal bar. When you glued the top it automatically made it a little angled
What
Very nice and simple wing design and make video. But have you tried making a KF2 or KF3 WING DESIGN? ( just curious)
maybe, I don't know, I prefer classic design
Great video, but is it possible to see something in early style again? Like creating a catapult from wood? :)
прикольно! А что за плёнка, ораковер подойдёт?
Обычный скотч
Цветной скточ
Is this a Cw or a CCW motor (do you have an alternative for it?) and what controller are you using?
I used CW, but for a pusher CCW better. Controller 12A no name
@@NumaVIG thanks
Добрый день. Есть вопросы по Вашей модели. Какой аккумулятор вы используете? какую камеру распалогали на модели? Спасибо
На этом стоит 2S 600mA 39 грамм, подбирается по весу, чтоб центр тяжести не уплыл, лучше чуть нос затяжелить, чем наоборот, для 750 мм размаха подойдёт и грамм 50-80.
Камера GoPro 7 но это другое крыло уже 1000 mm размахом, видео полетов позже выложу
@@NumaVIG Вот спасибо за оперативный ответ. Я планирую подобное крыло на 800мм, хочу как раз использовать 800maH (2S) 50гр и до 1100maH (3S) 80 гр, думаю как раз будет. Сначала хотел KESL 32 делать, но Ваше видео по постройке увидел и передумал. Ещё у Вас оклейка скотчем очень аккуратная, отлично. Ранее я делал Jupiter Duck (моя первая модель) полетел сразу, не смотря на то что никогда не летал, но всегда хотел крылышко, так что буду строить, в том числе благодаря Вашему ролику. Спасибо.
на больший размах нужно лонжерон более жесткий, обычно клеят деревянные линейки, я для 1000 мм на циркулярке напилил 1,5 мм шпон и приклеил его к пенопласту , и две нервюры центроплана тоже неплохо бы усилить на случай падений, на видео с краштестом это хорошо видно, там крыло 600 мм и весом 170 г , 4 мм потолочка в гармошку сложилась довольно быстро :-), на видео подложка 5 мм
@@NumaVIG Учту ваши советы, у меня подложка 5мм, тоже хотел в районе центроплана усилить и если честно, то всё таки хочу какой-нибудь фюзеляж сделать по д электронику. Ну и конечно лонжерон помощнее.
You didn't show us how to use the battery to balance the center gravity of the plane.
use several different batteries
Really cool what is the skill level to fly this like? Im just starting into the hobby have piloted 3d heli but want a airplane thats not going to be a handful for a beginner tia💕💞
You can fly a 3d heli?! You almost have this plane thing down. Wings are easy to fly once tuned especially with the center of gravity. The only drawback for a beginner is that they don't return to level by themselves like a proper trainer type plane would. I would suggest trying out a plane on a simulator and learning it. Then get a trainer. But if your like me and want to start with a wing (I did haha) get an EPP wing TekSumo set it up light and start flying, you will crash alot but it should hold up very well. I'm still flying my original after many crashes and repairs and it's still a great flyer. Good luck!
@@greg0063 i have a spectrum tx
3s rx servos eflight esc and heading lock gyro from a blade sr but was trying to figure out how to use it for a plane the esc is designed to move all the servos collectively when throttling but the rx has
Aux 1
Gear
Rudder
Elevator
Aileron
Throttle
Battery
Its the esc i don't understand how to use it has out put for brushles main motor ,tail motor ,rx,and heading lock gyro which has four wires to the rx 😖
@@terranovarain2183 it might be possible but unfortunately not probable. That radio has the dip switches under that front panel correct? You might be able to position them so the servos are mixed. This would be a long shot though. You need an elevon mix for a wing to fly properly. A modern computer radio will have it in there as a preset and it is easy to do. It also makes it easy to tune as far as expo and throws.
@@greg0063 i want to get this fly sky fs-i6x tx rx from amazon prime its only 48$
@@terranovarain2183 that radio will do whatever you want, good choice.
Hello! First of all, great work!!
Build it exactly like you, but have a problem with CG!
Need extra 117g in the nose to get in balance?
What did i wrong???
Greetings from Austria
use a bigger battery
I have an 900 mh with 58g
add action camera
Ok, Tahnx!
@@NumaVIG 1st thing 1st I appreciated ur great job and 2nd may I know what soft u used to design the wing and converted to A4 tiled version. It will help me to make my self and convet to A4 tiled version. Thanx and waiting Mate.
thanks for Sharing. Very nice
you're a brilliant manufacturer :)
love the build, great outcome. Thank you for this instructional video.
Amazing building skills !