Ikea Desk Assembly
HTML-код
- Опубликовано: 28 авг 2024
- How to video with step by step instructions for assembling an Ikea Bekant style desk.
Please support my RUclips channel iScaper1 by using my Amazon Storefront to purchase products on Amazon.
iScaper1’s Amazon Storefront: www.amazon.com...
Very helpful. Thank-you. (And I did appreciate your including the part numbers.)
+Shirl Kennedy
Thanks Shirl for the feedback.
Currently disassembling mine at my college dorm thanks for the video!
Good luck!
You're probably not going to be able to help me at all, but this desk has a wobble. On the corner(L shape part of the desk, putting any weight there causes a wobble. The side with the longer foot. The side with the shorter foot feels fine and sturdy. Driving me crazy. I don't want to take everything off and put it back on for a third time. ugh...Feel like I just tossed $250 down the drain. Desk seems awesome aside from the wobble
On the bottom side of the longer foot and the shorter foot are adjustable knobs to level the desk. Can you use these to take the wobble out?
failedtolisten I have the same problem. It has nothing to do with the feet not being levelled. it's just not stiff enough. I wish I could fix it!
@@Iscaper hows this desk holding up? do you still have it.
oh my gOd I am sooo00 frsutrated with this desk!!! got it 2ndh of someone - in mint condition(!)... but do you think i can get it to stop wobbling...???? Absolute shite. Have twisted all those bloody knobs godknows how many times but to no avail... I have a spirit level. Doesnt help when i cannot see what the major issue is. Just AWFULL. Can anyone help??? btw, the longer of the two legs has 3 balance feet - the other side only has two,,,, so I took the middle one off the longer foot thinking it might help - it didnt.
The part at 1:20 that took you a couple seconds has taken me over 15 minutes now. Having a hard time guiding the bolt into the hole.
I only wish all the Instruction videos were as clear and as well presented as this one
You explained it sooo well I (15 years old) did it by myself
Thanks for watching.
Is there a part number for the leg height metal adjustment knobs? One of the metal adjustment pieces threads have worn and the screw won’t stay in/tighten. This means I can’t raise one side and tighten the leg.
Did you find a fix for this? I too have stripped mine and the table is useless without the proper height.
MISSION PASSED
Respect++
Fantastic video. Thanks
Glad you liked it!
I’ve lost one adjustment screw for the leg. Idk what it’s called to replace it.
On the website black and white both have the corner on other side to each other, the white one is the right one for me but I want the black one bcz nothing is white in my room, was it like that for you or is it just the pictures?
I don't remember, I know we picked it out because the corner section was on the left.
@@Iscaper i know this was 6 months ago but i found out it was on the left and for some reason the picture was on the right so i ordered the desk and it fitted perfectly, it was like it was designed to fit exactly how i needed it, its between my bed and my wall in a small room and its flush against the wall and next to the bed.
Any idea if the desk could be disassembled easily and safely and reassembled in case of moving the house.
We just moved our desk from downstairs to upstairs without disassembling. You could remove the legs if needed for moving.
just want to ask, but I have a cintiq that weighs 21 lbs and a monitor arm that holds the cintiq. Now I got a cheap 26 dollar ikea table that came with 4 legs. So after I installed the monitor arm and then the cintiq on top. So a few weeks later I was using my cintiq and as I pulled it down to get it in level, the monitor arm stand started to sink/dig in to the table. Well I found out the quality of the wood was sort of compressed wood/sawdust.
What kind of table and wood type would be able to hold my cintiq with the monitor arm and won't sink in. Can you tell me the thickness or width and such so I can get a strong type of wood table.
Thanks in advance.
mechaart chipboard, the cheaper ones are filled with honeycomb cardboard
awesome video! Thanks for the help.
Thank you!
Like this video! Quick and precise, no crap : )
Why is the bottom of the black desk, light brown?
Thank you. This was helpful.
Hello, my desk has the same color legs as yours and i noticed that the adjustment screw doesnt have a silver part to it, it is only black. Am I missing a part? Because the adjustment screw refuses to budge and I cannot adjust the height of my desk.
I got my desk used. Is there a way to pull out the plastic pins you hammered into the desk? On leg needs to be tightened but I can access it because the frame os connected into the table.
Why is the long edge of the desk top slightly angled? Is it just to look fancy or does it actually serve a purpose? It's mildly infuriating
Hello iScaper1. Thank you for this video. What is the measurement of the foot (base of leg) on the 43 1/4" side of the table? Just need to make sure it will fit into the corner area, taking the baseboards into consideration.
Awesome 👍
Thanks 🤗
Thank god! The darn instructions need to show a hammer. You saved us from ten gray hairs
is this the bekant non motorized ?
Yeah
after 5 years I buy this product
@@algusmi222 it very good table and stable just make sure it fix corner wall u will never feel any vibration
Good if looking for pc setup ☺️
100% recommended
Big thanks to you
+rashid Al-Dabbas
Thanks Rashid for watching.
So for this we just need Allen key and no screw driver?
The desk comes with the hex/allen wrench you need for assembly.
thanks
Is the desk solid? Does it shake?
+lucius jan
It's my son's desk and he says it's sturdy and stable.
Is the underframe same for either corner or is it different for right and left
Different for right and left.
there’s one step that’s missing. :/
Kerry when are u going to do a pump install
+john Kosheluk
Hey John, still no requests for a pump install but I'll be sure to do a video when I get one.
What is your opion on the desk 2 years later
I have this desk but my mom accidentally threw away all the screws, does anyone know where I can buy replacements?
I'm gonna go out on a limb and recommend Ikea. :P
for real? they're using plastic push tabs for holding down the frame to the table top? wouldn't that make it loose? wtf
You did this by yourself???
Yes
Is the desk solid? My monitor stand punched holes in my other desks from ikea.
it's not solid wood. It's laminated with veneer (in most versions; solid white is melamine) and is rated for pretty high loads (100kg as opposed to 30 kg for many other Ikea tables) but it is still basically chipboard. Now, chipboard isn't the weakest stuff around. Ikea sells some cardboard tables, no really, they are made of cardboard, it's stated upfront, and i suppose you use a bracket that can crush it. Do you really need to tighten it so much? How much does your monitor weigh? Mine is 6.6 kg and its bracket didn't leave a mark on a pretty shitty chipboard table, inferior to this one.
It's a solid particle board but I would honestly attach another scrap piece of wood to disperse the pressure the stand will put into the table. Ikea has has hollow tables such as the Malm, and other lower end ones, this should be easy information it's on all their product pages.
I have the desk and it feels sturdy, but I dont think I raised it to the maximum height. One side seems to have a metal key where it wont raise higher. Can you show how to adjust the leg height? Thank you.
OskarJ2007 mosqueda
How do u adjust the highs thank you
+classical gaming jew
There is an allen head screw on the back of each leg that you twist to adjust the desk height.
can anyone tell me the width of the desk and by that i dont mean the corner side but the longest side
63 by 43
@@FlapjackRevenge is the bottom part on which it stands is also 63 and 43? Thanks
can i switch the desk from left to right?
No, you want to order either the corner-desk left or the corner-desk right.
can i drill a hole in this table for PC cables ??
yea think so,just be shure to use a propper drill bit and saw from both sides
How do you take out the grey push pin thingys
I'd try a flat blade screwdriver and a pair of pliers.
+iScaper1 thanks helped out a lot
those walls need some refurbishing
What is the length of the part of the desk that doesn't stick out? guess around 60cm?
+René Stok
Length of desk is 63", or 160cm.
+iScaper1
no i guess i don't mean the length. i think i mean the width and then not the part that sticks out because i know thats 110 cm i mean the part that doesn't stick out.
+René Stok
The width has a slight taper to it from 28" (71cm) to 24" (61cm).
+iScaper1 thank you very much!
where can i get the parts
ikea
Link to this desk?
+Eclipse
Here's the link: www.ikea.com/us/en/catalog/products/S09006390/?query=BEKANT+Corner+desk-left#/S29006394
j
h
I don't need the fucking part numbers of every fucking thing!
+TheLAKERSareGodsTeam try to relax a bit.
You mad
What the hell oh hell no
j
h
j
h
h
h