I bought an RMRC Recruit (AR Wing with a gyro) so i didnt have to wait on the long boat from china. I LOVE every minute of flying it!!!!!!!!!!!!!!!!!!!
Hey Stu! This wing is awesome. Saw it a few weeks ago on your channel, my brother bought one. Now my dad and me also have one... Wing flying with 3 people is sooooo much fun! Also a very nice platform this little thing. Keep up the good videos! Greets from Austria.
truthfully, flying wings or hotliner/warmliner gliders (max lift and speed) has an effect on adrenaline that is hard to match. I love the Sweepwings Behemoth (build it light, 4s, 80amp, 930w, 11x8), and Juggernaut (4s, 1800kv, 60amp, 780w, 8x4 prop), and a 4s Phoenix 1600 (plastic fuselage) with a 1400kv, 60a, 730watts on 8x6 prop that goes about 85mph. Great video guys, that wing actually is a great lightweight wing ,the AR here.
Good stuff but can you please explain stuff like what RX you used, arming, does the ESC brake when you reduce throttle? Would you need to be able to disarm but still have control of the ailerons? or does reducing throttle stop the prop spinning completely for landing? Is it better to have CG nose heavy or tail heavy? How do we trim, just using the trim buttons on the radio? I just received the mini 600 mm wing in the BNF version, I'm worried it will be harder to fly than a bigger wing and was considering trying to fit the matek f411 wing fc in but I would rather keep it simple. There's lots of info on INAV etc online but this is the closest thing I've seen to setting a simple wing up in an easy to understand format, would just love a few more details like what we need in a receiver because we are used to s.bus etc. and don't know what's needed for servos etc. without an FC, thanks guys.
I have the RMRC recruit which is the same as the AR900 except it has a stabilizer with launch mode makes it so easy to launch. Then I got the AR mini for my second wing, it is a little harder to launch without the stabilizer but not to bad. I have had the best luck launching the mini while wearing goggles because it was rolling on launch.
good video... and a good wing... but right now I have a hard time understanding why you'd buy an AR wing over some options... there are a few other wings with identical foam, just some differences on electronics... if you are running frsky go with the frsky AR+ wing on hobbyking... use the 10% off code and it's $5 more than the ar wing and comes with an awesome ESC with telemetry, a better motor, and a s6r frsky receiver which has a gyro/auto-stabilization built in and is programmable to use on other things if/when you upgrade your wing to inav or kill the wing... and if you aren't a FRSKY guy you've got the RMRC recruit (at least here in the US) which is again the same wing but with a simple FC option that will use standard receivers or spektrum satellites or an rx with ppm or sbus...
@@StolenDog Nice flying! Just curious which Frsky receiver were you using on the Sonic if you don't mind me asking? Just getting into myself. Also thought about throwing the Zohd Kopilot on it for a little bit of stability.
Great video, I have a quick question. It was a little unclear (maybe I’m just not getting something) on how the receiver is connected. How would someone put an eLRS receiver for example on such a wing?
I really wanted to get a Nano Goblin. They look like heaps of fun. I've been eyeing off the Ritewing Drak too. I reckon that would be a beaut to fly. There's a bunch on the list, I'll get to them all eventually.
What reciever did you use (looks like an FrSky)? Also, what is the red/yellow cable shown on the reciever going below the XT60 (12:15 in the video). I am having trouble getting the servos to respond to PWM (wondering if I need a PPM reciever?). THANKS!!!
Awsome vid stew!! I just order all the parts I need, I cant wait😁 but i was wondering what batteries you used?? I have a bunch of 4s 1300mah would those work? Or should I go higher like a 2200mah
Hello. I have a ar wing 900mm. I have always flown LOS. I am looking to get into fpv. Eventually long range. For now I am look for a camera, vtx, goggle set up. Some of the links in the description died. Any set up combinations/recommendations would be greatly appreciated! Thanks!
Hey Stew, Great build video and you are seriously having too much fun! However, I have a question about whatever happened to the Sunday Q&A sessions? They were my one favorite things on your channel. Will they come back or did I just miss an announcement or something about them? Thanks again for all you do for our growing hobby.
i have a question i have the same kit... do i need to buy a flight controller? also more importantly how do i install the wing tips? its the foam and seems to have a rough cut wooden piece as well, do i paint the wood and does that install on the outside or inside between the foam wingtip then the wooden piece then to the main wing? im stumped here please help... thanks in advance for any advice you can share.. and how to mount these darn wingtips?! thx again. -peter
hey stew or any one i am look for a replacement sponge foam or leather or any non regular foam pads for the aomway commander v1s any help would be appreciated
Hi I build you v2 $99 build and I can’t get my radio connects either the drone I build the pro one and have a flysky fsi6 radio with a fsia6b receiver I have it connect to sbus and is not working what should I do
I'm new...but I have a flysky i6x and A8s receiver. Had to replace my receiver the other day, after I did I was getting it to bind just fine but nothing would happen with my kwad. I had to hold the bind button for 2sec after successfully bound to change ibus to sbus. I have an RtF and can't access Betaflight but checking your protocol there if you can would be good too.
COLD DASH I had it connected to the sbus but the pad broke off so i connected it to the rx6 pad and it’s still not working and now it will not it will not connect to beta flight.i thing is broken but it lights up and beep
Dont need to as a fixed wing is aerodynamically perfect, and only 1 motor so nothing to work together with. There are ones with flight controllers if you want stability mode etc.
![BOLIVIA vs. COLOMBIA [1-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 9](http://i.ytimg.com/vi/zg15uVWjuf4/mqdefault.jpg)
I finally flew mine today for the first time.
What a blast! I think it was even more fun that quads.
Thank you both for the easy to follow setup
I bought an RMRC Recruit (AR Wing with a gyro) so i didnt have to wait on the long boat from china. I LOVE every minute of flying it!!!!!!!!!!!!!!!!!!!
You getting smashing In the leg is funny as hell holy crap that's hysterical
Hey Stu! This wing is awesome.
Saw it a few weeks ago on your channel, my brother bought one. Now my dad and me also have one... Wing flying with 3 people is sooooo much fun!
Also a very nice platform this little thing.
Keep up the good videos! Greets from Austria.
Hej Thomas how is the quality of the wing?
truthfully, flying wings or hotliner/warmliner gliders (max lift and speed) has an effect on adrenaline that is hard to match. I love the Sweepwings Behemoth (build it light, 4s, 80amp, 930w, 11x8), and Juggernaut (4s, 1800kv, 60amp, 780w, 8x4 prop), and a 4s Phoenix 1600 (plastic fuselage) with a 1400kv, 60a, 730watts on 8x6 prop that goes about 85mph. Great video guys, that wing actually is a great lightweight wing ,the AR here.
I'd love to get my hands on a Behemoth or Juggernaut. BIG BOIS!
I was literally thinking about building one of these yesterday
I’m jealous of the fun you are having
Good stuff but can you please explain stuff like what RX you used, arming, does the ESC brake when you reduce throttle? Would you need to be able to disarm but still have control of the ailerons? or does reducing throttle stop the prop spinning completely for landing? Is it better to have CG nose heavy or tail heavy? How do we trim, just using the trim buttons on the radio?
I just received the mini 600 mm wing in the BNF version, I'm worried it will be harder to fly than a bigger wing and was considering trying to fit the matek f411 wing fc in but I would rather keep it simple. There's lots of info on INAV etc online but this is the closest thing I've seen to setting a simple wing up in an easy to understand format, would just love a few more details like what we need in a receiver because we are used to s.bus etc. and don't know what's needed for servos etc. without an FC, thanks guys.
I have the RMRC recruit which is the same as the AR900 except it has a stabilizer with launch mode makes it so easy to launch. Then I got the AR mini for my second wing, it is a little harder to launch without the stabilizer but not to bad. I have had the best luck launching the mini while wearing goggles because it was rolling on launch.
Nice job jonno. Also mate you woke cal and myself up this morning at 6am bro... time differences in china vs aus
I thought you were back already 😂... ahhh I mean, just making sure you were up in time to appreciate the beautiful sunrise. Heh.
Stu You should try Long Range Wing builds its amazing adventures.. Keep up the great work really enjoyed this video.
Thanks for showing a fun side of the hobby!!!
What size battery do you typically use
My dad needs to fpv a wing... immediately after I do!!!!! 👍🏼😎
Wing build, awww yea! Thanks for sharing lads!
This looks absolutely great fun 👍 it's inspiring me to go out and get one and have a go ❤️☮️🙏😇🔥🔥
Thanks for sharing 😊
good video... and a good wing... but right now I have a hard time understanding why you'd buy an AR wing over some options... there are a few other wings with identical foam, just some differences on electronics... if you are running frsky go with the frsky AR+ wing on hobbyking... use the 10% off code and it's $5 more than the ar wing and comes with an awesome ESC with telemetry, a better motor, and a s6r frsky receiver which has a gyro/auto-stabilization built in and is programmable to use on other things if/when you upgrade your wing to inav or kill the wing... and if you aren't a FRSKY guy you've got the RMRC recruit (at least here in the US) which is again the same wing but with a simple FC option that will use standard receivers or spektrum satellites or an rx with ppm or sbus...
Jonno u legend ! Awesome vid!
Coming from you Mr. Top 10! You're the man.
@@StolenDog Nice flying! Just curious which Frsky receiver were you using on the Sonic if you don't mind me asking?
Just getting into myself. Also thought about throwing the Zohd Kopilot on it for a little bit of stability.
@@ironhrse78 pretty sure it was a R-X6R for this one. Good RX.
@@StolenDog Awesome thanks Soo much!
Great video, I have a quick question. It was a little unclear (maybe I’m just not getting something) on how the receiver is connected. How would someone put an eLRS receiver for example on such a wing?
Great video, but I am having trouble figuring out if you used the 4S battery to power the reciever? The 5v off the ESC won’t power those servos…?
Hey Stu , I would like to see Jonno fly a Ready made Rc Strix Goblin. I never see u review any Strix products. Their products look pretty good.
I really wanted to get a Nano Goblin. They look like heaps of fun. I've been eyeing off the Ritewing Drak too. I reckon that would be a beaut to fly. There's a bunch on the list, I'll get to them all eventually.
I loved the edit at the end!
Well i guess I'm gonna have to break down and get a wing looks so fun and simple to build and fix..... I'm game!!!!
Does this include the travel time and the wait time for the required ordered parts to be delivered? If sooooooo, i'll keep watching.
What reciever did you use (looks like an FrSky)? Also, what is the red/yellow cable shown on the reciever going below the XT60 (12:15 in the video). I am having trouble getting the servos to respond to PWM (wondering if I need a PPM reciever?). THANKS!!!
I was waiting for it long time, tanke you
I use a Turnigy Evolution for Quads... could I fly something like this still?
Awsome vid stew!! I just order all the parts I need, I cant wait😁 but i was wondering what batteries you used?? I have a bunch of 4s 1300mah would those work? Or should I go higher like a 2200mah
should i get the mini or full size sonicmodell? i fly quads acro normally but looking to get into wings and don't want to end up with 10 wings lol.
Awesome Video man!!!
PWM | NO FC | OLD SCHOOL = LOVE IT !
Hello. I have a ar wing 900mm. I have always flown LOS. I am looking to get into fpv. Eventually long range. For now I am look for a camera, vtx, goggle set up. Some of the links in the description died. Any set up combinations/recommendations would be greatly appreciated! Thanks!
Hey Stew, Great build video and you are seriously having too much fun! However, I have a question about whatever happened to the Sunday Q&A sessions? They were my one favorite things on your channel. Will they come back or did I just miss an announcement or something about them? Thanks again for all you do for our growing hobby.
i have a question i have the same kit... do i need to buy a flight controller? also more importantly how do i install the wing tips? its the foam and seems to have a rough cut wooden piece as well, do i paint the wood and does that install on the outside or inside between the foam wingtip then the wooden piece then to the main wing? im stumped here please help... thanks in advance for any advice you can share.. and how to mount these darn wingtips?! thx again.
-peter
Stu what if we want to use Crossfire? What is easiest way to run a crossfire RX?? Thank you
Are you flying the PNP version of the at wing 900mm on 4s the website says it recommends a 3s. Can the included electronics handle 4s?
Any chance of a video showing inav? I’m gonna be building one
Excellent as always, how to get auto return to home working on this with the gps
Nice video but what about the CG set up? Does it need it?
Ordered sonic mini AR on black Friday, also a stabilizer. Unfortunately I don't have osd on my AKK AiO so set the kitchen timer.
just set up a timer on your FrSky Taranis
I have flysky i6x.... budget stuff atm
can you use a turnigy evolution with the the right receiver ??
hey stew or any one i am look for a replacement sponge foam or leather or any non regular foam pads for the aomway commander v1s any help would be appreciated
What size battery do you recommend??
@18:47 what were you building?
I’ll tell you what would be more helpful to the people, a Joshua Bardwell style INAV wing set up.
check giz fpv, amazing easy to follow videos on i nav wing builds, iv learnt loads from watching it
Who won your comp Stu?
How do I power and setup that RX6R receiver?
are they the 600mm or the 900mm wing
Can you update this for a DJI build? I’m a little new so idk wtf I’m doing
Its great with DJI. Have two clips with it on my channel, can check the setup in description. Check it, it's a solid wing.
Why is fpv camera off to the side like that? Anyone know why not in middle? Above or below Gopro would work... 🤔🤔🤔
Are you Jason Belmonte’s brother???????
Does this wing need to use a GoPro to fly or is t not necessary?
I believe the weight upfront is needed.
Teddy Hutcherson yeah I’ve heard of that but what if I don’t exactly have a gopro😂
Twisted Props FPV go buy lead fishing weights and look up how much a GoPro weights and add the appropriate amount. Problem fixed
does this also work for 3S ?
Can you put a DJI fpv kit in it
my finger screws in mine were stripped and one of the servos was bad, was pretty upset, otherwise it is great
What was the receiver you used?
R-X6R. They are awesome.
i think its a frsky rx6r
Still good tough, long range allrounder in 2022.
what...no flight controller?
ELEVONS. "Flaps" makes me facedesk. Ya feekin n00bs
Lol my X9D set all that up by itself
Who's is the Pink taranis..?? Lol😂
What's uuuup stew
Psychio FPV in china right now
Hi I build you v2 $99 build and I can’t get my radio connects either the drone I build the pro one and have a flysky fsi6 radio with a fsia6b receiver I have it connect to sbus and is not working what should I do
I'm new...but I have a flysky i6x and A8s receiver. Had to replace my receiver the other day, after I did I was getting it to bind just fine but nothing would happen with my kwad. I had to hold the bind button for 2sec after successfully bound to change ibus to sbus. I have an RtF and can't access Betaflight but checking your protocol there if you can would be good too.
COLD DASH I had it connected to the sbus but the pad broke off so i connected it to the rx6 pad and it’s still not working and now it will not it will not connect to beta flight.i thing is broken but it lights up and beep
Should I buy a new flight controller or is it my remote controller
Wish I could help, I did find my fix through a video reply tho
Thanks I Tried the holding for 2 second thing but it didn’t work
You didn't talk about CG and how to lanch
15 minutes? Well thats no fun! :D
Now you should start going towards that kind of wing: /watch?v=rI_xvpHjVpI
It's really fast :D
Robert is your Father's brother!
Sorry, I had never seen a "Right handed soldering iron".....
What? No flight controller 🤔
Dont need to as a fixed wing is aerodynamically perfect, and only 1 motor so nothing to work together with.
There are ones with flight controllers if you want stability mode etc.
First
Damn 3rd
no fair....I'm left handed lol
i re winded 5 times yup he said wing-mangina
Get a RiteWing.. ...if your gonna fly a wing son
No not ther razors blads.n my stomach kg ckringgged
Send me one please😁
ELEVONS....ELEVONS....NOT FLAPS...SMH