Coding Plug Hack (Dynamic Pro Unlock) for 2014+ S1000R and S1000RR
HTML-код
- Опубликовано: 24 авг 2024
- This video shows how to get dynamic pro for a BMW S1000r or RR 2014+. If you don't want to sit through the whole video, you are essentially jumping both pins to the coding plug on the Motorcycle.
You made my day
Heya JBimmer, nice of you to post this one.
I bought recently (a week ago) a S1000R used and I guess the plug has been put into it because Dynamic Pro has been unlocked since I got it.
I noticed one thing though, you got a straight exhaust but the ticking from the engine is quite audible, mine ticks as well but not from cold... your engine at operating temperature already which seems to match my own experience.
And how long you've owned it? Have you noticed the noise?
I did notice the noise when I got it. The previous owner I bought it from said it made that noise since the day he got it. I checked the cams and the clutch basket springs and all checks out fine. I just forget about it and enjoy the bike. Cheers
@@jbimmer9799 Referenced it because I'd thought that having an exhaust installed would baffle the engine noise and wanted to let you know.
Nice "hack", funny that the manual references it's a coded plug but it seems you only need to jump it
Salutations . Does the system still work? Bmws1000rr 2017 POSSIBLE PROBLEMS IF DONE TODAY?
How did you block the wire to bridge and then go around with the bike? Can the plug cap be reinserted?
Thanks and congratulations.
Thanks for the video it helps a lot and im one,
I have S1000R 2016 with only Rain and Road map. Can i have Dynamic and dynamic Pro maps with these things that you show
Did you succeed on your side?
Do you leave the coding plug in?
No... he is jumping the connector where the plug normally goes... so this is to save buying the "plug" from BMW
Any news on the ticking noise mate?
Have you had a major service done and had the cams etc all checked?
Cheers
reset the adaptations with the gs911
2020 F900XR works as well 🙂
Is he obliged to have the dynamic mode to unlock the dynamic mode pro? I only have road and rain mode.
Amazing, Man! 😂
Do you unplug it once it's unlocked and visible on the screen or do you have to leave it in place and try to cover it up so no water or dirt get in there?
I not geting full power on my bike I see code p2842 came up who can help me out
Just get the plug
Basically, all you have to do is just to bridge it?
Yessir. Too easy
Is for the s1000xr the same mode?
@@panagiotisbailos195 it should be the same
@@panagiotisbailos195 I have same question s1000XR work same? Anyone tried?
@@MichaelDeeter1 2016 xr can confirm it works