Attention! This video contains mistakes: 9:09 - the tightening torque is 55 Nm, not 105 Nm. 9:15 - the tightening torque is 40 Nm, not 65 Nm. 9:20 - the tightening torque is 43 Nm, not 55 Nm. 10:10 - the tightening torque is 60 Nm, not 50 Nm. 10:34 - the tightening torque is 245 Nm, not 115 Nm. 10:46 - the tightening torque is 100 Nm, not 110 Nm. We're sorry for the inconvenience 🙇♂
Great tutorial but bear in mind these additional points. These springs are side-loaded and are difficult to reinstall even with a workshop compressor. Study the positioning of everything in the video closely before attempting. Note the socket used to lever the strut base forward. This is critical but not mentioned in the video - however it is just about visible. I used this video for a 2008. The driveshaft nut is 35mm (not 34mm, not 36mm) and requires 325Nm (240 lbs ft) to secure
Have a look at other videos on our channel: 🔸 PEUGEOT 208 1 car repair tutorial - ruclips.net/p/PLWep5LzT0sxnLT8M6UaR2DSD7Cm4ZlS4T 🔸 How to replace front suspension arm PEUGEOT 208 1 (CA_,CC_) - ruclips.net/video/fGnIPzW3_jc/видео.html 🔸 How to replace pollen filter / cabin filter on PEUGEOT 208 1 (CA_,CC_) - ruclips.net/video/CdBzOXHnvWA/видео.html 🔸 How to replace spark plug on PEUGEOT 208 1 (CA_,CC_) - ruclips.net/video/nexOMEFaDbQ/видео.html 🔸 How to replace front brake discs / front brake rotors on PEUGEOT 208 1 (CA_,CC_) - ruclips.net/video/Y_GfdQNbs-s/видео.html
Thank you for your comment! You are absolutely correct, we had to skip this step to reduce the length of the video. The new nut was used as well, behind the scenes. Best Regards, Autodoc Team.
In general, the replacement will be similar, the only thing that may be slightly different is the design features of your car. You can find more detailed information in the technical documentation for the repair of your car. AUTODOC
We cannot show all the nuances and problems during replacement, it is all individual and it is not always possible to solve them at home. To avoid this, we always recommend making replacements at specialized car services.
Thank you for your comment! You do not have to remove the central bolt of the hub, but this is fraught with the fact that when you dismantle the shock absorber, you will pull the driveshaft and pull it out of the gearbox, after which oil will surely flow out of the gearbox. Changing the oil in the box is not a cheap procedure, and it's easier to protect yourself and remove the hub bolt. Best Regards, Autodoc team
Attention! This video contains mistakes:
9:09 - the tightening torque is 55 Nm, not 105 Nm.
9:15 - the tightening torque is 40 Nm, not 65 Nm.
9:20 - the tightening torque is 43 Nm, not 55 Nm.
10:10 - the tightening torque is 60 Nm, not 50 Nm.
10:34 - the tightening torque is 245 Nm, not 115 Nm.
10:46 - the tightening torque is 100 Nm, not 110 Nm.
We're sorry for the inconvenience 🙇♂
Great tutorial but bear in mind these additional points. These springs are side-loaded and are difficult to reinstall even with a workshop compressor. Study the positioning of everything in the video closely before attempting. Note the socket used to lever the strut base forward. This is critical but not mentioned in the video - however it is just about visible. I used this video for a 2008. The driveshaft nut is 35mm (not 34mm, not 36mm) and requires 325Nm (240 lbs ft) to secure
Thank you for sharing your experience, it will be very useful information for us and our viewers.
Best Regards,
Autodoc team
11 minutes. Seems easy. 🎉
Have a look at other videos on our channel:
🔸 PEUGEOT 208 1 car repair tutorial - ruclips.net/p/PLWep5LzT0sxnLT8M6UaR2DSD7Cm4ZlS4T
🔸 How to replace front suspension arm PEUGEOT 208 1 (CA_,CC_) -
ruclips.net/video/fGnIPzW3_jc/видео.html
🔸 How to replace pollen filter / cabin filter on PEUGEOT 208 1 (CA_,CC_) -
ruclips.net/video/CdBzOXHnvWA/видео.html
🔸 How to replace spark plug on PEUGEOT 208 1 (CA_,CC_) -
ruclips.net/video/nexOMEFaDbQ/видео.html
🔸 How to replace front brake discs / front brake rotors on PEUGEOT 208 1 (CA_,CC_) - ruclips.net/video/Y_GfdQNbs-s/видео.html
I did enjoy it, thanks for the tutorial ❤❤
Can you adjust the camber with the pinch bolt at the bottom of the shock?
Good video, just a pointer, you didn't stake down the hub nut on reassembly. Hopefully a new nut was used as well?
Thank you for your comment! You are absolutely correct, we had to skip this step to reduce the length of the video. The new nut was used as well, behind the scenes. Best Regards, Autodoc Team.
Can you confirm which way the small notch cut out in the top mount faces please.. outwards. Or inwards towards the engine? Thx
Faces in towards engine
@@Slowmotors123 I though so. Thank you
Thanks
is it the same procedure on the Peugeot 2008 ?
In general, the replacement will be similar, the only thing that may be slightly different is the design features of your car. You can find more detailed information in the technical documentation for the repair of your car.
AUTODOC
I love how he just pulls down the pry bar and the ball joint just comes off, absolute nonsense, most of the time it takes time and numerous hammering.
We cannot show all the nuances and problems during replacement, it is all individual and it is not always possible to solve them at home. To avoid this, we always recommend making replacements at specialized car services.
Good 👍👍👍
Good info, that music was bloody awful though
I was looking for the other side. The grill doesn't come off on the other side.
Im having this exact issue right now. Found a solution yet?
@@RCS163 Nope but what I heard is that the whole grill has to be pulled off completely to reach and clean the other side. What a drama :(
Onur hocam donanım haber dışında seni burada görmek ne güzel :D Sıkıntı mı vardı süspansiyonlarda
@@Huseyin1422 Hocam selamlar :) Sizin DH nicki neydi? Valla bir ara garç gurç sesleri vardı, bu aralar yok, kafasına göre bazen olabiliyor :)
Please could somone explain what purpose the pin punch serves at 3:17?
Can I get away with not undoing the hub nut?
Thank you for your comment!
You do not have to remove the central bolt of the hub, but this is fraught with the fact that when you dismantle the shock absorber, you will pull the driveshaft and pull it out of the gearbox, after which oil will surely flow out of the gearbox.
Changing the oil in the box is not a cheap procedure, and it's easier to protect yourself and remove the hub bolt.
Best Regards,
Autodoc team
@@autodocuk thank for your response! Wish I'd seen this before, guess who has dumped gearbox oil over their drive haha
Kill this awful background dross 'music' otherwise an excellent and informative video 👌