My very first machine was the Dream Machine. I loved it so much, and I helped purchase the Inovis 2500D for my sister (because I love her, and she and I have the same interests) that was in 2016/2017. Then when the Luminaire came out, I could not help myself and I bought that one, gave my sister my Dream Machine and traded in the 2500D. That was in 2018/2019. Now I have purchased the Aveneer, we're trading in the Dream Machine and my sister is getting the Luminaire, which has been upgraded to a Luminaire III. SOMETHING IS WRONG ME, OBVIOUSLY! Hahahahahahahahahahaha! Catheys Sew & Vac just notified me that my Aveneer is ready for pick up. I feel like a HAPPY SNOOPY, DANCING ALL OVER THE ROOM!
Becky I love that you are letting us go through the errors with you.! You are showing us the steps to go through to work through it! As a newbie, I really appreciate it.
Does Darla need a trip to the spa? Your hair DOES look great!! This is a great demo of how to work with problems. All of your efforts are helpful for someone's problems!
One time, I had these kinds of problems on my machine. I got so frustrated because I did all the troubleshooting you were doing. I shut the machine off and quit for the day. The next morning, I turned it on and tried again, figuring I’d continue problem solving. But everything worked perfectly fine. 🤷🏼♀️
Becky, I watched after hours this video. I wanted to commend you on your enthusiasm despite all the issues you came across with Darla. How you just improvised and still maintained a great attitude. You are very transparent and calm. Love you, what an amazing class!! ❤
I just went through the same thing today with a different design. I was using a pre-wound bobbin. So, after doing everything that Becky did today, I rewound my own bobbin; and it started working fine.
Did you catch the lower thread guide closest to the your needle. I would probably change your needle. I probably would've shut my machine off and restarted..
I think Darla heard that you were thinking about a haven't year later on. Boy I wish I watched your live yesterday. Becky we all go through this. It's good that you walked away.
My 225 DX is connected to scan n cut and cavas workspace and Embrilliance. I can send designs wirelessly, I just want to know if Becky ever uses the My Connection for anything.
I know this problem is a mess but it is always a learning lesson. Just pull your hair out and start again. If nothing works, time for a visit to the rep.
How do you see the comments when watching the play back?? Also, fantastic showing the Trimmer by George ! I learned i have to go get a 60 mm cutter for mine. Have not used it yet and bought my friend one. Yaaay!!! Soooo helpful. I think you could not have coreographed any probs better for a demo!!! Love it!!! You are awesome!!
Becky, I have just done just a few ITH projects on my Stellaire. I had a horrible time with thread shredding and breakage. I was using Sweet Pea low loft batting and the Sweet Pea Bag Stiffener. What foot height do you normally use? Default at 0.6? and what maximum or minimum speed is your machine set at for these projects. My machine was on defaults and Tech said is was too fast.
I also hate to slow my machine down. I run my industrial at 800-900 spm even though it is rated for 1200. At 1200 it will vibrate across the floor. When I take a machine in not only do I take a sample stitch out I make notes on it at what point I made what changes. Changed needled here. Changed thread here. Changed bottom here. Etc.
I Just love Designs by JuJu- they have so many Happy Designs! Have a good week everyone!
My very first machine was the Dream Machine. I loved it so much, and I helped purchase the Inovis 2500D for my sister (because I love her, and she and I have the same interests) that was in 2016/2017. Then when the Luminaire came out, I could not help myself and I bought that one, gave my sister my Dream Machine and traded in the 2500D. That was in 2018/2019. Now I have purchased the Aveneer, we're trading in the Dream Machine and my sister is getting the Luminaire, which has been upgraded to a Luminaire III. SOMETHING IS WRONG ME, OBVIOUSLY! Hahahahahahahahahahaha! Catheys Sew & Vac just notified me that my Aveneer is ready for pick up. I feel like a HAPPY SNOOPY, DANCING ALL OVER THE ROOM!
Becky I love that you are letting us go through the errors with you.! You are showing us the steps to go through to work through it! As a newbie, I really appreciate it.
Thanks! I always try to be transparent about my process so viewers can learn from my mistakes, too.
I just got a luminaire 1 that was updated to a 3. I love it, love it, love it.
Does Darla need a trip to the spa? Your hair DOES look great!! This is a great demo of how to work with problems. All of your efforts are helpful for someone's problems!
You could not have come up with more things that can go messed up and yet you are soooo ready for the demo! Way to go Becky!!
One time, I had these kinds of problems on my machine. I got so frustrated because I did all the troubleshooting you were doing. I shut the machine off and quit for the day. The next morning, I turned it on and tried again, figuring I’d continue problem solving. But everything worked perfectly fine. 🤷🏼♀️
Just a reminder for watching later: Multineedle starts at 1:23.
Do you still do videos for designs by ju ju? I loved the details and explanations you did.
If I’ve learned one thing, it’s a good day! Guna get the trimmer by George!
I see you’re a fan of MGQS too. ❤
Becky, I watched after hours this video. I wanted to commend you on your enthusiasm despite all the issues you came across with Darla. How you just improvised and still maintained a great attitude. You are very transparent and calm. Love you, what an amazing class!! ❤
When I’m having those problems, I clean out the bobbin area. It’s usually dirty
Morning, had somebody to the airport this morning. It's nice to connect with my family when I take them to the airport
Way to keep going Becky. I would have gotten too flustered and just said Goodbye everyone I'll see you tomorrow.
I commend the efforts you put into this one. I would have used so many choice words, the swear job wouldn't been full. TY for sticking with it.
Brother 10 needle 1000e has 14 x14. Does 1/2 and then you flip and do the other half
Wow! What a day you had. Good recovery.
I just went through the same thing today with a different design. I was using a pre-wound bobbin. So, after doing everything that Becky did today, I rewound my own bobbin; and it started working fine.
I don't see a hot mess. I see opportunity to have fun!!
Becky it is so helpful to see how to do the stops when putting in the 10 needle! Thanks! Have barely used my 6 needle
My brother nv1e will only emroider with top stitch needle because the needle has a larger eye
BL 14x14 hoop is for split designs. You can make lots of designs a split design in Embrilliance. FYI
I noticed that at 50.08. You just tied off your threads. You didn't rethread the machine from the very beginning.
Did you catch the lower thread guide closest to the your needle. I would probably change your needle. I probably would've shut my machine off and restarted..
I think Darla heard that you were thinking about a haven't year later on. Boy I wish I watched your live yesterday. Becky we all go through this. It's good that you walked away.
I had the same issue with my 😢 thread, on red and green. I slowed down my machine to 600. I changed thread brands. Still fighting thru it
I always shut my machine off.when I take off the needle plate ,that can cause some issues.
Pull out and check the bobbin case for Knicks or burrs.
Becky do you ever use My Connection on Scan N Cut? Debating if I really need it. I would need to upgrade from my 225 DX.
My connection allows your scan and cut to talk to your computer. You also use it to access CanvasWorkspace.
If you don't mind using the USB then it wouldn't be worth any upgrades, IMO
My 225 DX is connected to scan n cut and cavas workspace and Embrilliance. I can send designs wirelessly, I just want to know if Becky ever uses the My Connection for anything.
I'm sitting here watching the replay telling you to check the bobbin area for a caught thread.
You mentioned that you used rayon thread. Do you use it for all your embroidery?
I know this problem is a mess but it is always a learning lesson. Just pull your hair out and start again. If nothing works, time for a visit to the rep.
I agree! Sometimes that's just what you have to do.
How do you see the comments when watching the play back??
Also, fantastic showing the Trimmer by George ! I learned i have to go get a 60 mm cutter for mine. Have not used it yet and bought my friend one. Yaaay!!! Soooo helpful. I think you could not have coreographed any probs better for a demo!!! Love it!!! You are awesome!!
Where is the frame link. I need one of those?the metal frame that is holding your project.
Do you need to use a nonstick needle maybe?
When are you getting your Aveneer?
Becky, I have just done just a few ITH projects on my Stellaire. I had a horrible time with thread shredding and breakage. I was using Sweet Pea low loft batting and the Sweet Pea Bag Stiffener. What foot height do you normally use? Default at 0.6? and what maximum or minimum speed is your machine set at for these projects. My machine was on defaults and Tech said is was too fast.
try flipping you bobbin so thread coming out counter clock wise
What brand of coffee do you enjoy?
Will you have classes on snapplique
Yes, I plan on it.
You may need to vacuum out the bobbin area
Aren’t you supposed to put the thread through a top hook if it’s threaded above? Hard to explain
I also hate to slow my machine down. I run my industrial at 800-900 spm even though it is rated for 1200. At 1200 it will vibrate across the floor. When I take a machine in not only do I take a sample stitch out I make notes on it at what point I made what changes. Changed needled here. Changed thread here. Changed bottom here. Etc.
Becky are you going to upgrade to the Brother Aveeneer?
Hey Becky, where did you get your multineedle machine cabinet. I absolutely hate the one that came with my machine. The storage is awful.
Have you change out the needle
Take the bobbin cover off and check.
Did you rethread?
OH MY HOSH,!! Becky I would have walked away after spanky started acting up
It's the machine, not the thread!
I see your hoop is bobbing up and down.
Becky where do you get the cutting boxes for your stabilizer? Thanks. Carol from Calgary, Alberta Canada
OH MY HOSH,!! Becky I would have walked away after spanky started acting up