3.0 TDI EGR Cooler Delete Install - CNRB+ Darkside EGR Delete!

Поделиться
HTML-код
  • Опубликовано: 15 окт 2024
  • The delete train continues w/ a common preventative install that helps eliminate your pesky EGR cooler!
    www.darksidede... - DISCOUNT CODE: “THATGUYTY” for 10% off
    Tunezilla: tunezilla.com/... - Use code "THATGUYTY" for 10% off!
    Intake Manifold Removal: • Engine Oil Cooler Re-S...
    Follow my Socials:
    www.instagram....
    www.instagram....
    / thaguyty

Комментарии • 52

  • @RomanTrollanski
    @RomanTrollanski Месяц назад

    Handy Audi entuziast here, I just said goodbye to my beloved A6 C6 3.2 FSI, after so many miles that served me so well (took it for a road trip to San Diego) and of course after lots of DYO hours with it...
    But recently just rejoined to the TDI club, I use to be a big fan of diesel prior moving to N. America 20 years ago...
    So, I traded my 3.2 FSI (best naturally aspirated engine ever) for a A8L D4 TDI, an extremely low mileage (30 000) it's a rare occurrence for north American, only 2 for sale in Canada, only 8 in USA...
    Anyway, glad that I found your channel, new subscriber here, I'll try to post videos as well. Greetings from Langley BC.

    • @ThatGuyTyy
      @ThatGuyTyy  Месяц назад

      Welcome back to the Darkside!!! Congrats on the purchase from Vancouver BC

  • @drubabineaux8772
    @drubabineaux8772 4 месяца назад +2

    That sure brings back bad memories. lol I I ended up changing all the seals and everything else under the intake along with a DPF cat less down pipe. And had to clean all the intake bc of all the carbon buildup from the egr. Eyes ruin motors

  • @rafsanshatil1560
    @rafsanshatil1560 5 месяцев назад +1

    I believe it's fit for my 2012 Q7 S-line CRCA engine. Darkside website says in compatible list: Audi Q7 - CJGC (204) CJMA (204) CJGA (239) CNRB (239) CLZB (245) CRCA (245)

  • @caseystevens8257
    @caseystevens8257 Месяц назад

    What were the results after the full delete? Noticeably better power or mpg? Or was it more of you could tell your vehicle ran better?

  • @Stoney1985
    @Stoney1985 2 месяца назад +1

    You said the oil cooler was leaking again, what was it this time, as you already changed the oil cooler orings previously.
    Just making sure im buying everything to do the job only once.

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад

      @@Stoney1985 it was just that I hadn’t cleaned the mating surface thoroughly enough, it’s so crucial and under proper oil pressure/ coolant pressure even a small lapse can cause a big leak

    • @Stoney1985
      @Stoney1985 2 месяца назад

      @ThatGuyTyy gotcha, you did emphasise that in the first video, guess this is the reason why. Cheers

  • @ericfeuerhelm2459
    @ericfeuerhelm2459 Месяц назад

    Will I be able to drive my q7 to the shop to get tuned after I install the delete myself in my garage at home?

  • @BenJamminJones1
    @BenJamminJones1 2 месяца назад

    Great video mate! About £225 for the harware kit but how much does the tune cost to map it out? Thanks

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад

      Depends on the tuner, but typically people delete the EGR along side other things/ for performance

  • @ryanmelville6855
    @ryanmelville6855 5 месяцев назад

    Great videos man! Do you have a video of removing the intake manifold? I need to pull mine for carbon/sludge cleaning.

    • @ThatGuyTyy
      @ThatGuyTyy  5 месяцев назад +2

      I’m gonna be doing one for covering how to replace just specifically the gaskets for the oil cooler and such so yes I will have up soon!

    • @ryanmelville6855
      @ryanmelville6855 5 месяцев назад

      @@ThatGuyTyy That would be awesome thank you. Mine needs done but I am a bit intimidated by the spaghetti bowl of stuff these new vehicles have going on under the hoods

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад

      Video is up!

  • @MK4moTDI
    @MK4moTDI 5 месяцев назад

    Are there any seals/gaskets necessary to replace while doing this job?
    My EGR pipe going to the intake was full right to the brim of coolant. My egr cooler is leaking.

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад +1

      I would say just the intake manifold gaskets, as the kit comes with the EGR gaskets!

  • @jeffreyhird1052
    @jeffreyhird1052 4 месяца назад

    Curious what you did with the vacuum lines and the electrical plug from the EGR Cooler? Did you cap or block off the Vacuum line by the temp sensor? how/where did you mount the other piece at the front left side of intake that was on the EGR cooler?

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад

      I plugged the vacuum lines and wrapped the connectors up, I left the vacuum valve connected to the other lines as well just plugged the out to the EGR cooler

  • @DarksideDevelopments
    @DarksideDevelopments 5 месяцев назад +2

    👌

  • @ShayneWolfe
    @ShayneWolfe 5 месяцев назад +1

    Love your content man!

  • @jerryli374
    @jerryli374 3 месяца назад

    Just did this to my friends cayenne, on the test drive it threw a check light for overboost but no limp mode what should I check first? Been running the Malone stage 1 (tunezilla) for a week without issues and finally got around to removing the cooler

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад +1

      EGR cooler delete shouldn’t be throwing overboost unless it had a significant boost/ exhaust leak prior to doing it. Overboost on a TDI typically will point to the veins or wastegate being out of adjustment causing turbo overspeed. Are you rolling coal?

  • @MariusHartescu
    @MariusHartescu 4 месяца назад

    Hi there , from where can we get the software in order to upload it and wich program did you used , thanks .
    I have a touareg 7P 2015 that I am looking in doing the same thing as I had enough of the egr issues

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад

      Link is in the description - it is from Tunezilla! The link in this video and others will give you a 10% discount!

  • @andydelassus2734
    @andydelassus2734 4 месяца назад

    12:51 Are those installation instructions provided by Darkside? Excellent video

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад

      They have instructions yes, I also using ELSA/ VW service documents

  • @dakotahouse9981
    @dakotahouse9981 4 месяца назад

    you dont happen to be able to get the part number off that EGR cooler do you? im dieing trying to find the number because my info sticker was removed

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад +1

      Shoot me a dm on IG and I’ll try to find mine when I get back to the shop!

  • @baileyyellop4259
    @baileyyellop4259 Месяц назад

    Did this and now I hear a loud knocking in engine ? What could this be !! Please help

    • @Sammy2o1
      @Sammy2o1 Месяц назад

      Probably dropped something in the ports when the manifold was off

  • @kdudutse
    @kdudutse 5 месяцев назад

    is that cnrb engine for sure? what is that aluminum cylinder near power steering fluid reservoir ?

    • @ThatGuyTyy
      @ThatGuyTyy  5 месяцев назад +1

      Fuel filter

    • @DVNikolovi
      @DVNikolovi Месяц назад

      @@ThatGuyTyyit’s the auxiliary low pressure fuel pump, not a filter!

  • @gagechrisman8954
    @gagechrisman8954 3 месяца назад

    A tune is a required step?? Thanks!

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад

      EGR delete tune, yes.

  • @whytepizza
    @whytepizza 3 месяца назад

    Anything out there for the CATA?

  • @kidfresh57
    @kidfresh57 4 месяца назад

    Happen to know what size bolt extractor it was to get that egr pipe loose?

    • @ThatGuyTyy
      @ThatGuyTyy  4 месяца назад

      That is a legit question, uhhh let me look when I get home, it was part of a set so I just kinda tried a bunch till I got one that worked haha, I put it around the head of the bolt itself, didn’t break the head off, just the torx thread was stripped

    • @michaelbolton1090
      @michaelbolton1090 2 месяца назад

      I usually use a 30 torx rbrt bit. They are a little pricey, but they won't strip out the head.

  • @CyanQuasar
    @CyanQuasar 5 месяцев назад

    Will this fit on the audi a7?

    • @ThatGuyTyy
      @ThatGuyTyy  5 месяцев назад

      2013+ 3.0tdi yes - can confirm engine codes at the link in the desc!

  • @vagcodingretrofit131
    @vagcodingretrofit131 3 месяца назад

    KIT for A6 C6 2.7 TDI CAND ??

    • @ThatGuyTyy
      @ThatGuyTyy  2 месяца назад

      Not sure in this engine code, all are listed on their product page

  • @koro287
    @koro287 2 месяца назад

    For heavens sake,cover those intake ports.

  • @IJaybenI
    @IJaybenI 5 месяцев назад

    Ty hear me out... for your next car get a BMW 335d.

    • @ThatGuyTyy
      @ThatGuyTyy  5 месяцев назад

      Sponsor me and I will 🫶🏻

    • @IJaybenI
      @IJaybenI 5 месяцев назад

      @@ThatGuyTyy im doing my own golf tdi build atm so im broke as hell

    • @ThatGuyTyy
      @ThatGuyTyy  5 месяцев назад +1

      @IJaybenI yeah unfortunately RUclips doesn’t pay the bills yet so 😂 maybe we’ll have another 335d in the future

    • @IJaybenI
      @IJaybenI 5 месяцев назад

      @@ThatGuyTyy i mean a good deal is like 8k so you'll be fine