Love your channel. I’ve added numerous mods based on your videos on my 2021 GMC Sierra 1500 AT4. Added the tailgate step lights, Bilstein shocks front and rear, etc. New 285/65 20 tires soon. You should look into the Edge CTS Insight Monitor 84130. Great way to monitor all engine vitals. Not a tuner just a monitor. Love your wife’s new Cadillac and know she is thrilled. Thanks again for taking the time to make all these informative videos! 👍
I live in Ontario, waaaaaay north on Ontario and my little 3.0 dirtymax was one of the only trucks starting after 2 weeks at the mine. 0 regrets with my AT4
Great follow up video, I am living in Alberta. Good to see that the mods stood up over the winter. My Putco blade, Auxbeam controller and Baja Designs S8 light bar for grille just showed up in mail. Stoked to install them. Keep up the great video. Thanks
Here is some input from mods I recently did to my new to me 2018 denalli 6.2. Cai-slight noise and slight throttle response. Programmer-slight power increase but when they tell u only 20hp they ain't kidding. Piaa driving lights tied into high beams-as always, fantastic! 2" level.ing kit-reduced mpg by 2+ mpg. With the cost of premium I'm considering going back to stock. Replaced stock Goodyear street tires with duratracs. Lost another 1 mpg and tracks lots of rocks into the garage. Strongly considering going back to a more mpg friendly tire. These last 2 mods are costing some serious $ with Bidens gas gouge.
Great vid bud, no worries on the pronunciation, people get it wrong all the time. I plan to do some vinyl wrapping this coming summer on my 1500 LT. Just some bumper chrome delete, nothing crazy
Don - looking at moving the factory badging and lettering on new AT4. Do you have a few sources I could start looking for quality black chrome badging to match the refreshed Sierra interior. Thanks.
Wish I had the same luck with my AT4 and the S&B intake….had them send me a replacement extension harness and was still getting a P0106 code….finally realized that if I drive it in L9 the code never comes on….I put it in drive and let the DFM nightmare awake and it only takes minutes and the CEL is lit up light a Christmas Tree
Hey Don, the center caps on my new Silverado rims, can the bow tie be vinyl wrapped with black or will that end up coming off after a wash/salt/dirt? I’m in michigan. Better to hyperdip? Was just thinking wrap would be cheaper and faster....
It depends how smooth they are. Hyperdip will work I’m sure, but Vinyl would be possible and glossier of thats what you want. Maybe order a 12”x12” sample of vinyl first and test it
Huge oversight on my part. The console organizer tray (link in the video description) has surpassed my expectations. If you ever need to place your loose change or button collection in an organized fashion, you won’t be disappointed with this tray.
Hey don. Just to be clear. You did the at4 badges or the dealership did. You just said something about them cutting the back one out weird. Also where did you get the bullet antenna from. I am waiting on a 2022 at4 and am trying to figure out why type of screw in to use and where to buy from.
Hey I found the bullet antenna link lol so disregard that. But another question do you happen to know anyone around saskatoon that does plasti or hydra dipping. I'd love to do it myself but I don't have the time, patience or artistic ability lol. Thanks
The dealership applied the paint protection film and they used uneven cutouts for the GMC letters on the tailgate. I purchased the black letter illuminated kit. Then I did some vinyl work with them during the installation and replacement of the original red ones. The bullet antenna is made by Ronin and linked in my video descriptions. It comes with screw adapters with it
No I don’t sorry. I was going to try hydra dipping but I am just too busy 😂. Hyperdip and plastidip have some good uses depending on what you need to do.
@@НелЁкКренделЁк-ю6к you could drive in sport mode, It minimized the downshifting. As for Engine problems, you’d have to see dealership if something happens.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
linktr.ee/donslife - Links to all of my products and discounts
Love your channel. I’ve added numerous mods based on your videos on my 2021 GMC Sierra 1500 AT4. Added the tailgate step lights, Bilstein shocks front and rear, etc. New 285/65 20 tires soon. You should look into the Edge CTS Insight Monitor 84130. Great way to monitor all engine vitals. Not a tuner just a monitor. Love your wife’s new Cadillac and know she is thrilled. Thanks again for taking the time to make all these informative videos! 👍
I live in Ontario, waaaaaay north on Ontario and my little 3.0 dirtymax was one of the only trucks starting after 2 weeks at the mine. 0 regrets with my AT4
Great follow up video, I am living in Alberta. Good to see that the mods stood up over the winter. My Putco blade, Auxbeam controller and Baja Designs S8 light bar for grille just showed up in mail. Stoked to install them. Keep up the great video. Thanks
Alberta born and raised!
SOLID video Don! Thanks for doing this. You helped me out with your mods this past year...appreciate it!
Excellent?
@@Donslife --- hahaaa...of course!
Here is some input from mods I recently did to my new to me 2018 denalli 6.2.
Cai-slight noise and slight throttle response.
Programmer-slight power increase but when they tell u only 20hp they ain't kidding.
Piaa driving lights tied into high beams-as always, fantastic!
2" level.ing kit-reduced mpg by 2+ mpg. With the cost of premium I'm considering going back to stock.
Replaced stock Goodyear street tires with duratracs. Lost another 1 mpg and tracks lots of rocks into the garage. Strongly considering going back to a more mpg friendly tire.
These last 2 mods are costing some serious $ with Bidens gas gouge.
Great channel Don ....thanks for everything you do!
Keep up the great videos, thanks for sharing. I appreciate all the awesome info.
You got it!
Great vid bud, no worries on the pronunciation, people get it wrong all the time. I plan to do some vinyl wrapping this coming summer on my 1500 LT. Just some bumper chrome delete, nothing crazy
😂 thanks for the forgiveness. Once I was editing the footage, I saw the graphic and clearly it was an ‘i’ and not ‘l’. Stupid printer 🖨
Don - looking at moving the factory badging and lettering on new AT4. Do you have a few sources I could start looking for quality black chrome badging to match the refreshed Sierra interior. Thanks.
Not at the moment but I will keep my eyes open
Wish I had the same luck with my AT4 and the S&B intake….had them send me a replacement extension harness and was still getting a P0106 code….finally realized that if I drive it in L9 the code never comes on….I put it in drive and let the DFM nightmare awake and it only takes minutes and the CEL is lit up light a Christmas Tree
My wife drives my truck quite often in Drive only and no issues either
Hey Don, the center caps on my new Silverado rims, can the bow tie be vinyl wrapped with black or will that end up coming off after a wash/salt/dirt? I’m in michigan. Better to hyperdip? Was just thinking wrap would be cheaper and faster....
It depends how smooth they are. Hyperdip will work I’m sure, but Vinyl would be possible and glossier of thats what you want. Maybe order a 12”x12” sample of vinyl first and test it
@@Donslife ok, i ordered some satin black vinyl off amazon, will try it out this weekend. thanks
Good video thanks for the update
My pleasure! Froze my butt off though 😂
wish you would have addressed how the solution to the button problem has held up
Huge oversight on my part. The console organizer tray (link in the video description) has surpassed my expectations. If you ever need to place your loose change or button collection in an organized fashion, you won’t be disappointed with this tray.
What did you do to your headlights ? What did you use on them
VViViD’s headlight and taillight tint
@@Donslife you put it on pretty dark ? No orange showed ?
@@highpaiddirtbag255 You can see the orange side markers at night but they are dimmer
Great job 👍👍💯 new sub to the channel bro 💯💯
Hey don. Just to be clear. You did the at4 badges or the dealership did. You just said something about them cutting the back one out weird. Also where did you get the bullet antenna from. I am waiting on a 2022 at4 and am trying to figure out why type of screw in to use and where to buy from.
Hey I found the bullet antenna link lol so disregard that. But another question do you happen to know anyone around saskatoon that does plasti or hydra dipping. I'd love to do it myself but I don't have the time, patience or artistic ability lol. Thanks
The dealership applied the paint protection film and they used uneven cutouts for the GMC letters on the tailgate. I purchased the black letter illuminated kit. Then I did some vinyl work with them during the installation and replacement of the original red ones.
The bullet antenna is made by Ronin and linked in my video descriptions. It comes with screw adapters with it
No I don’t sorry. I was going to try hydra dipping but I am just too busy 😂. Hyperdip and plastidip have some good uses depending on what you need to do.
Do you plan on buying new wheels?
Absolutely! It will happen. I haven’t finalized my choice yet
I should of thought of tooth pic I used plastic knife and razor blade
My bad for not sharing the tip
Not a fan of DFM
You aren’t alone but it is getting harder to avoid
@@Donslife did you get the Pulsar LT?
Nope
how to prevent such a problem? I'm far from the USA and don't know how to solve it if there is an engine problem?!
@@НелЁкКренделЁк-ю6к you could drive in sport mode, It minimized the downshifting.
As for Engine problems, you’d have to see dealership if something happens.