Stormworks - Modular Engine Tutorial
HTML-код
- Опубликовано: 3 авг 2024
- This guide will show you how to correctly place the parts of a modular engine.
In the second half I also show some engines I have made and use and talk briefly about some tricks to take modular engines to the next level.
Here are names and links to the modular engine ECU's I recommend.
LC Advanced Modular Engine ECU
steamcommunity.com/sharedfile...
Toasterys Modular Engine ECU
steamcommunity.com/sharedfile...
M-Tech All In One Modular Engine ECU
steamcommunity.com/sharedfile...
C4V ECU V3
steamcommunity.com/sharedfile...
ZE Modular Engine Controller
steamcommunity.com/sharedfile...
--- --- --- --- --- --- --- --- --- --- --- --- --- --- ---
My Stormworks Steam Workshop: steamcommunity.com/id/terr-ra...
Stormworks HDMI Collection: Contains various ISO and Modular Cargo System compatible fuel containers. steamcommunity.com/sharedfile...
Stormworks HCLI Collection: Contains various truck and trailer units for ground based logistics. steamcommunity.com/sharedfile...
Stormworks NSR Collection: Contains locomotives, railcars and other rail based vehicles. steamcommunity.com/sharedfile... 
Игры
![Jordan Adetunji - KEHLANI REMIX (feat. Kehlani) [Official Video]](http://i.ytimg.com/vi/EeJ8n5PxFGE/mqdefault.jpg)
Only issue is you could have gone over how to make an ECU but you know what. That's a completely different can of worms. Other them that. Good tutorial
What's a ECU in stormwork explain? Please
@@LinuxShortsidk it's the modular engine microcontroller, which controlls various parts of the engine to not overheat and work prorperly, it's explained in the video how did you miss it?
Someone made one and its great. Controls everything, even adjustable afr
@@christiancraig2326who made it
@abas656thegodemperor9 don't know if you got your answer, but he is likely talking about ZE's engine controller, it was mentioned in the video I think. It's on the workshop.
WOW, the editing and quality is amazing, nothing I've ever seen before for stormworks content
You deserve SO many more subs. Thank you for posting man. I will be sure to keep up with your videos as you come out with them.
This is the only tutorial I found that works 😂
bro i have been looking at vids for about a week now and your vid helped me make a modular engine you should give yourself a pat on ur back you are amazing
Haha Thanks, Ill do that.
This channel deserves more subscribers, super easy to follow and helpful overall
Thank you.
Yes it is, I love I found it. THe only thing is that I have to get used to the accent, that "fuel" and "air" sound like "feel" and "ear" to me lol, english is not my first language I must say, but I like the accent!, I just have to train my ears to hear it
The doctor said 10 days
The Court says 10 mins
READY? ACTION!
.
Arcsys intro aside, this intro got the modular engine tutorial done in less than 10 minutes. Very Cool.
bro you def need more subscribers this is fire dawg
High production quality 🤩
This is a really cool style, Good stuff man
Thanks.
Extremely underrated channel
great tutorial
Amazing tutorial!!!
Thank you!
Amazing video! Would love it if you could make one about nuclear reactors for a boat or submarine!
In the case of the flywheel, it is kinda necessary because it provides momentum keeping the crankshaft spinning instead of the crankshaft soley relying on the pistons moving the crankshaft
You can control the rps with controlling the clutch pressure with a lever
0:58 THANK YOU MY CRANKSHAFTS WERE VERTICAL
No worries. Have seen that a couple of times.
Thank you!
You're welcome!
Hi, could you do a tutorial on how to make the microcontroller? I can't install it.
Your guidance is very helpful, but how can I display the engine temperature?
3,000 hours in the game and this is how I learn that you have to give Alternators a number to run
hell yeah! now i can be s m a r t e r
also,
me: air = air
him: air = ear
it just sounds that way.
Accents sure can be wacky sometimes.
How many fuel manifolds and air manifolds do you need? Do you need just one or more depending on the amount of cylinders?
Usually 1 air and 1 fuel manifold. There are some instances where multiples of each can change the behavior of an engine but you wont need multiples in normal engines.
ok, thanks@@terr-rawr-saur
I cant seem to get my 5x5 engine to run(with and without flywheel) I have to press and hold the push button but it usually holds at 2.90 RPM until I release the button then it returns to 0. Any pointers or guides I can be directed too? other wise great tutorial Im probably just being dumb. Thanks in advance!
Usually you need to pass 2 rps to start an engine, but Ive seen that a heavily loaded 3x engine will require passing 4rps to properly start and then needs a higher rps target to maintain itself. It might be something like that where you just need to give it more air and fuel to maintain a higher rps.
Hey, so I tried to make a if you do normal engine, but longer, will it work with the way you did it? Cuz it ani't working for me.
(P.S) I have 7 crankshafts.
Yes, you could have 1000 crankshafts and it would still work the same way. The more cylinders you add the more load you need to start but one starter motor should be sufficient to start a 7 crankshaft engine.
I followed the steps but my engine has to have the starter kept on for it to continue running and the exhaust isn't working. Can you tell me why?
Could be the exhaust manifold is on backwards or that there is no fluid port on the end of it. Its hard to say exactly without seeing it. But those are common issues.
hey i made the engine running but when i stop the car it just stalls out and cant be restarted do you maybe know whats the problem?
Could be the engine rolling back into negative rps. I use a threshold for my starter condition so I had it set to low 0 and high 2. So if the engine was 0, 1 or 2 rps the starter would go.
This meant if the engine ever suddenly got stopped or put into reverse it would roll back into -0 which is outside of 0-2.
Not sure if thats your problem but might be worth looking into it.
really good tutorial, please make a tutorial on how to make a modular engine ECU
id say honestly that simple engines are actually better because their easier to cool And they make 2x the power than the modular engine especially comparing a flat 8 cylinder vs a medium engine, the medium engine Dominates.
when i try to do the same and put it in my humvee it wont start can you tell me what i should to pls
Make sure your clutch is set to 0 when starting the engine.
Check that your air and exhaust pipes exit into the open air.
Check that all the pipes are actually connected. Example, sometimes a pipe may be placed the wrong orientation.
Check the fuel type in your tank is set to diesel.
It was the clutch thx
i did all of this but a push the button and it makes the sound of starting but when i let go it stops
It might not have air, exhaust, fuel or be reaching 2rps to properly start. Look at the engine with the tooltips enabled, I think its home key by default, and see which values are still at 0.
@@terr-rawr-saur I got it working turns out I was using 0.50 air and 1 fuel when it was the other way round but now it's working it's too fast and I can't figure out how to make it slower
Have a look at the engine ECU's in the description. If you are dead set on making your own you will need an RPS limiter. Usually you want some kind of PID and a low and high target. Low for idle and high for max rps. @@LogBrickN1
The exhaust is at 100 % even tho it has an exhaust port and exhaust pipe and keeps over heating, whats wrong?
Are you cooling it? You can start and run and engine without cooling.
@@terr-rawr-saur it's over heating to fast but I fixed it
I put this in my boat, and I made it 3x3 and it redlines at 1.5 rps for some reason.
1.5 rps would mean it hasnt started yet. It is probably missing something. It needs to be going 2 rps or faster to start.
@@terr-rawr-saur do I need more starters or something?
Possibly. It could be the air or fuel intake. Just try more starters to begin with.@@mrmirchi3647
taking mc controllers from the workshop is weak.
Theres only one wokrshop microcontrollers and its the Airdrop
I don't know what you mean.
i do evry step but my engine wont start... star only if i put "INFINITE FUEL"
Infinite fuel bypasses every port. Which means the air, fuel or exhaust pipes may not be connected to fluid ports or a fuel tank in the case of the fuel manifold. Double check your pipes.
@@terr-rawr-saur it was air exhaust pipe... now it works! Tnx
You tell me it wasnt working because i set it sideways??
Lots of people have done that.
i conneted it to some wheels and it dosent work.
If the engine runs but the wheels do not move, you need some kind of clutch controller. There are some ECU's that have built in Clutch and gearbox controllers, ZE has some Truck ECU's with this, and also a separate clutch controller.
Try this clutch controller. steamcommunity.com/sharedfiles/filedetails/?id=2973981226
@@terr-rawr-saur I have the same problem and I dont understand what to do with the clutch controller. Please Help.
@@danieltoman7692 What is the problem? Automatic Clutch controllers usually engage after a set RPS so you need to connect all the logic, set the min and max engagement RPS then use a throttle to make the engine RPS increase beyond the clutches detected engagement.
Ive done everything step to step as the video and my engine wont atart
Watch it again. Report back with specific issues. If you can provide some specific details about whats happening its easier to diagnose.
mine wont work
Start again, follow the instructions.
my engine refuses to start even though i copied the exact same design you did
i followed every single step
and yet the engine wont even crank
please help
Check the direction of the crankshaft and make sure the circular sides are connected to the drive belt and clutch, you can enable tool tips in the game settings to show you if the engine is getting air, fuel and producing exhaust, If it is not producing exhaust the fluid ports on the exhaust manifold may not be placed correctly.
I feel like such a dummy, I was sitting here for half an hour wondering what I did wrong and it was my crankshaft 😂
my air:fuel ratio: 1mil:1
Idk, it just dont wotk. I completed alredy 3d guide and my engie still dont work
oh, i figured it out
What was your fix friend
@@VagueReaper I`m sorry. I dodn`t remember