I wish I had one of these older trucks I used to have a nissan datsun most reliable vehicle I ever owned. I currently own the 2005 xterra and very happy with it.
Thank you. I will try this. Drove to work this morning with TCS light stuck on and my 2012 pathfinder was stuck in limp mode. Will drive it to the nearest auto part store after work to get this can of cleaner. Check engine light was on too. Checked code and it was a P0101 which is mass air flow sensor issue.
Why is that some people posting videos showing how to repair, replace or cleaning vehicles parts never show the final results? was the problem fixed? I could make a video showing how to tear down an engine and then putting it back together but, will it work?
Nice video.. Can you link me to your Nissian Frontier Throttle Body cleaning video.. I replaced the MAF and still having some issues?? Thanks and appreciate your videos
I've heard I should unhook the battery after any MAF work and leave it off for 15 minutes, then reattach and go for a five mile drive above 25 mph to re-set the ECU to the new MAF numbers...is this necessary?
I am getting a P0102 code and losing power sometimes when I try to accelerate. I tried cleaning, but didn't use 1/2 can so I don't know whether I need to clean it again or get a new MAF? It appeared to be very clean.
Great video, also question I watched both your videos on cleaning the throttle body and the sensor, I did exactly as you did and used the same CRC cleaner. After driving my truck for the first week every thing seemed to be working nice and smoothly once again. But then suddenly I started having the same issue where my RPMs would fluctuate oddly again, what do you recommend I should check for this time? Thanks again
You need to do the Idle relearn process. Cleaning the MAF and throttle body will throw off the readings because the truck is used to those being dirty. Follow the idle relearn/reprogram process
Thanks God this truck is a nightmare. Bad radiator caused need for transmission rebuild, bad crankshaft sensor, camshaft sensor, ecu failure, new driveshaft ughhh!!
A simple 100 radiator or trans cooler relocate would have saved all those problems. Very easy to avoid. Cam sensors are easy repair, use quality oem sensors and its a one time repair. Unfortunately, lack of knowledge or awareness of how easy it is to avoid these issues, has caused thousands of trans replacements and people stressing over a simple camshaft sensor. Mechanics should be more proactive and educate their customers on how to maintain their vehicles. But owners usually wouldn't listen anyways
check the codes....you can go to most any parts store and they will do it for free. That should narrow things down but this if you are having the check engine light coming on
I wish I had one of these older trucks I used to have a nissan datsun most reliable vehicle I ever owned. I currently own the 2005 xterra and very happy with it.
Cool I have and Xterra 2005....by any chance have u ever replaced the timing belt or chain belt?? U know if neede it?
Awesome Video. Easily viewed, and clear to follow. Thanks for making quality videos.
Excellent video with very clear instructions, thank you!
Thank you for this detailed procedure 👍🏻
BEST VIDEO.....YOUR GOOD--CLEAR AND THOROUGH!! ..THANK YOU
Thank you. I will try this. Drove to work this morning with TCS light stuck on and my 2012 pathfinder was stuck in limp mode. Will drive it to the nearest auto part store after work to get this can of cleaner. Check engine light was on too. Checked code and it was a P0101 which is mass air flow sensor issue.
We're you losing power from take off, but after 20 mph it ran fine?
@@codyrockwood15 Yes. Would stall out some times. Cleaning the mass air flow sensor with that cleaner fixed it. Although I drive a new Titan now lol..
Good video ☺️ I can get in my mamas good graces with that info for her Nissan. 👍 Thank you
My 05 loses power when driving.shakes a little.no codes.do you think it might be throttle body or maf?
Why is that some people posting videos showing how to repair, replace or cleaning vehicles parts never show the final results? was the problem fixed?
I could make a video showing how to tear down an engine and then putting it back together but, will it work?
Will this fix the P0101 code? thanks in advance -PawPaw
I really enjoyed your instructional video ! Thank you so very much. All My Best ! ~Rick
Did you have an issue or check engine light or did you just decide to clean it?
Thanks Mr . Anthony
👍thank you sir !!!! Very helpful!!
What are the symptoms that will arise when it’s time to clean or change the maf sensor
I did it and it worked well.
do you disconnect battery before taking sensor off or its ot required?
Nice video.. Can you link me to your Nissian Frontier Throttle Body cleaning video.. I replaced the MAF and still having some issues?? Thanks and appreciate your videos
I've heard I should unhook the battery after any MAF work and leave it off for 15 minutes, then reattach and go for a five mile drive above 25 mph to re-set the ECU to the new MAF numbers...is this necessary?
thank you from Australia
thank you Mr Anthony!
I am getting a P0102 code and losing power sometimes when I try to accelerate. I tried cleaning, but didn't use 1/2 can so I don't know whether I need to clean it again or get a new MAF? It appeared to be very clean.
Thank you, worked perfect for my 2012 Xterra
Can this cleaner be used on the TPS as well?
Great video! Thanks!!
My truck is acting up is hesitation went I driven?
Was your check engine light on ?
Great video, also question I watched both your videos on cleaning the throttle body and the sensor, I did exactly as you did and used the same CRC cleaner. After driving my truck for the first week every thing seemed to be working nice and smoothly once again. But then suddenly I started having the same issue where my RPMs would fluctuate oddly again, what do you recommend I should check for this time? Thanks again
You need to do the Idle relearn process. Cleaning the MAF and throttle body will throw off the readings because the truck is used to those being dirty. Follow the idle relearn/reprogram process
Did a camshaft sensor go bad?
Thanks to the review!
THANK YOU MY FRIEND ALSO! Keith Great vid!
you are welcome
love this guy!
Muchas gracias body nice video
Love this Video !!
How long does it take to dry?
How often should MAF be cleaned?
CRC MAF Sensor Cleaner directions suggests cleaning should occur every time you install a new (or clean if you have a K&N) air cleaner filter.
great video. thanks!
Great video!!
👍
🙏 gracias amigo good video
Great video
Thank you sir!!!!
How to set er
Can I use something else?
disconnect battery first??
Thank you
Can I use this, Can I use That? I know you said to use only the product you showed up, but, but 😂
Great video to the point, Thanks for sharing 👊
good video sir
2009 xterra vcd and slip light loss power
can I use w- 40 😄
Where is the vdc switch
Thanks God this truck is a nightmare. Bad radiator caused need for transmission rebuild, bad crankshaft sensor, camshaft sensor, ecu failure, new driveshaft ughhh!!
A simple 100 radiator or trans cooler relocate would have saved all those problems. Very easy to avoid. Cam sensors are easy repair, use quality oem sensors and its a one time repair. Unfortunately, lack of knowledge or awareness of how easy it is to avoid these issues, has caused thousands of trans replacements and people stressing over a simple camshaft sensor. Mechanics should be more proactive and educate their customers on how to maintain their vehicles. But owners usually wouldn't listen anyways
can I use lighter fluid?
No but you can use mayonnaise.
Points for mayonnaise.
Also worked for me
Even ketchup too.lol
Yes, but you will need strike a lighter in order to see what you are doing. Good luck.
Do a manual relearn after on it .
If don't know how to youtube can help.
What it I do all that and the problem come back
check the codes....you can go to most any parts store and they will do it for free. That should narrow things down but this if you are having the check engine light coming on
will intake cleaner work as well???
Maybe you've dealt with it already.
Careful as the spray may leave residue, maf specific stuff doesn't
Why didn't you disconnect the negative battery terminal?
Can I use w- 40? 😱
Nissan was gonna charge me $1080.00 to service this part 😂😂😂
They want $700 just for the sensor.
What’s the point for cleaning it
Check engine light comes on if the sensor gets dirty
I hate this truck >: l
Great video
Thank you
👍
Thank you
Thank you
Thank you
Thank you