02 f150 Fx4 differential cover bolts are 5/16 x 18 x 3/4" long with a 1/2" flange head on them. I stripped a few taking them off. Also I forgot the tag after I threw it aside. But the great video reminded me to go find it. thanks
Thank you so much I went threw 2 differential s and I was on the brink for a 3rd cause I didn't know where the plug was I overloaded the first one with Asian carp and the whole rear end fell out 😂 fish everywhere on the dirt road 2 nd one was ignorance now I m gonna save this one 😂😊
1st step is to always make sure to remove your fill plug first. If for some reason it’s stripped or broken and you didn’t notice you’re going to be what’s called “FUCKED”! At least until you figure it out or fix it. When making a how to video you should tell the viewer the size of the fasteners which on this vehicle is a 13mm for the cover bolts and can use a 3/8 extension or 3/8 square pipe socket for the fill plug… just clean it will before inserting it to make sure you do not strip or damage it.
This mechanic is the perfect reason you do this job your self, he did not use a gasket and I never saw a torque wrench set for 33ft lbs he just wants to send it and get onto the next job.
@@BootLegGarage775 don't need a gasket with the rtv he's using and 33ft lbs would be too much...go into your bathroom, stare at the mirror, and see the moron staring back at you.
Not very bright are you. Gaskets are not required and busting out a torque wrench on differential cover bolts is a waste of time. It's not a fucking head bolt or a wheel stud.
Steve, thank you for sharing. Just one question....what was the extra fluid that you placed in that differential???? I'll wait for the answer. Greetings from Texas
@@BootLegGarage775 You can do the sealant and put it back on and add the oil right away? The back of the sealant tube says wait 24 hours. Is it OK to add the oil before that?
ive alwayslike me a little mess especially the shit talking of some poeple why dont u loud mouth s see if u can fight as well as u twist wrenches. good video.guys
Great video, im about to do my f150 this weekend.
I was wondering if you do side work on trucks??
Hi yes we do we are located in NV.
@@BootLegGarage775 can you email your number please? My email is sanchez1911@yahoo.com. looks like we live in the same town p-town
@@jss-xe5li ok sent
02 f150 Fx4 differential cover bolts are 5/16 x 18 x 3/4" long with a 1/2" flange head on them. I stripped a few taking them off. Also I forgot the tag after I threw it aside. But the great video reminded me to go find it. thanks
Glad you enjoyed the video
Don't get your goddamn fingers in there! Haha love the video, well done guys
Thanks for subbing. ya we do a lot of funny things like this,
@@BootLegGarage775 will this apply to the harleys and ligthtings ?
@@emmanuelgarcia3021 Hi yes it does apply.
@@BootLegGarage775 thank you for the content.
@@emmanuelgarcia3021 Your Welcome
Thank you so much I went threw 2 differential s and I was on the brink for a 3rd cause I didn't know where the plug was I overloaded the first one with Asian carp and the whole rear end fell out 😂 fish everywhere on the dirt road 2 nd one was ignorance now I m gonna save this one 😂😊
1st step is to always make sure to remove your fill plug first. If for some reason it’s stripped or broken and you didn’t notice you’re going to be what’s called “FUCKED”! At least until you figure it out or fix it. When making a how to video you should tell the viewer the size of the fasteners which on this vehicle is a 13mm for the cover bolts and can use a 3/8 extension or 3/8 square pipe socket for the fill plug… just clean it will before inserting it to make sure you do not strip or damage it.
Very nicely done.
Thank you very much
Oh man, this guy’s humor reminds me of mine. 😂😂😂
I'm old school. I like Your Style.
Glad you enjoyed the video
Love the sense of humor. I’m a mechanics daughter and it made it much easier to learn.
Hi glad you enjoyed the video
@timothymcveigh8194 It's spelled torque and he said 15-20 ft lbs
You need to get out more.
Omg you said chingaderis…love it 🇲🇽
Great video. Thanks!
He kind of reminds me of Red Green.
Good vid thanks for sharing
This mechanic is the perfect reason you do this job your self, he did not use a gasket and I never saw a torque wrench set for 33ft lbs he just wants to send it and get onto the next job.
Hi glad you enjoyed the video. He has 40yrs experience and he did torque them down off camera.
@@BootLegGarage775 don't need a gasket with the rtv he's using and 33ft lbs would be too much...go into your bathroom, stare at the mirror, and see the moron staring back at you.
Not very bright are you. Gaskets are not required and busting out a torque wrench on differential cover bolts is a waste of time. It's not a fucking head bolt or a wheel stud.
Bullshit. You should stay on the couch and stay away from vehicles.
Why didny he use a gasket and torque them down on camera 🤦@@BootLegGarage775
Love it and the mechanic is amazing
I clean the gears with brake cleaner and wip the excess out with Scott's blue paper Towels
How long should I let the gasket maker sit before adding fluid/driving? Great video btw!
Hi i let it set for about 5 to 10 minutes then you can add fluid.
Best to let set overnight...
Mine come with gasket do I put on the gasket sealer and then the gasket
Hi we didn't use a gasket just used the sealer on it
Steve, thank you for sharing.
Just one question....what was the extra fluid that you placed in that differential???? I'll wait for the answer.
Greetings from Texas
Hi ya its called Lubegard Mixture Limited Slip Supplement 4 Ounce you can get it at Oreilly's or any auto parts store. Hope this helps you
😮😢😢@@BootLegGarage775😊😢14 dB bub by ppl l0 😊
Hello GG very voy 3s se😢pr0ds t c😊did voy ds Ubuntu
Love this guy, so funny😄
Thank You
good job
Thanks for sharing
Your Welcome
Why you don’t use the gasket instead glue??
Hi ya its a sealer not glue.
Can you use break cleaner instead to clean all the differential better..??
Hi yes you can use break cleaner
No gasket ,. Just grey gasket sealer ?
Hi yes just gasket sealer.
Como cambiar el sello del diferencial del lado dela rueda derecha
What was used to take the plug out?he never mentioned
Hi ya its just a socket wrench that was used to take it off.
Good job
Thank You
Divertida forma de trabajar 👍
???
Estoy atorado no puedo quitar el disco una solución
What size are the bolts holding cover on
They are 5/16" x 18, Thread length is about 3/4
What’s the name of the white bottle u put in with the purple one? Are Farts included? LMAO!
it's an additive for the diff fluid. can't remember the name sorry
Ok so 2 bottles? Ford F-150 1998-and 1 small?
yes
Ain't it funny how those fords have dirt underneath and fall on you while working on them. A/C compressor. Starter, fuel filter, and what not.
Hi ya we go off roading a lot where we are at.
LOL oh man i got so many handy dandy chingaderas XD hahaha. do you guys have any handy dandy chh-chh's too? haha
no but we got some gigabobs lol
@@BootLegGarage775 lol now that's a well stocked mechanic
I put lock tight on plugs.
So you’re the one
Funny guy! What kind of sealant? And fluid?
Hi yes the fluid is 75 140 royal purple and grey rtv sealent for diff cover
@@BootLegGarage775 You can do the sealant and put it back on and add the oil right away? The back of the sealant tube says wait 24 hours. Is it OK to add the oil before that?
@@unclematt3 Hi just wait like 5 or 10 minutes and it is good.
How often should you change the diff fluid
Hi ya i change mine every 50000 miles cause i go off road a lot.
@@BootLegGarage775 I have a 03 Ford f150 and I don't drive that much or go off road , regular rear drive, never had changed the fluid, is that wrong?
@@ernievilla6840 Hi ya i would change it if you have never done it before. It's good maintanance
Guy is hilarious 😂
Thank you
So about 1.5 ugga duggas?
lol Yep
Bro that was the most dragged out exhausting video on the simplest thing I’ve ever seen
I was just fine until I read this and now I feel tired.
if you dont wear gloves you’ll need a doctor. thanks for this👍
lmao 8:50
If you were Smart you'll use a hose that Fits The Tip of the bottle of Oil
The quarts come in squeeze pouches. Now that’s smart.
I saved a $146 Do-it-yourself
Hi ya i save a lot of money have a mechanic in the house
@@BootLegGarage775 And access to a lift is key
@@NuclearEngineerDOE ya it is key and we have a friend with a lift also
I like the content by your sense of humor is sickening.. maybe stop talking too much and concentrate on the project.
ive alwayslike me a little mess especially the shit talking of some poeple why dont u loud mouth s see if u can fight as well as u twist wrenches. good video.guys
Thanks
😂👍
🤣🤣🤣🤣 chingadeeerrraaa
Goofy