How to Replace Rear Axle Bearing 1997-2003 Ford F-150
HTML-код
- Опубликовано: 25 окт 2022
- Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1AAXX00122
This video shows you how to install a rear axle bearing on your 1997-2003 Ford F-150. If you hear a grinding or groaning noise while your vehicle is rolling, it might have a worn out wheel bearing. A worn bearing can allow the wheel to wobble, creating a host of other issues. To save yourself from more headaches down the road, replace your bearing right away. For solid rear axles, you'll need to replace the axle seal too.
This process should be similar on the following vehicles:
1997 Ford F-150
1998 Ford F-150
1999 Ford F-150
2000 Ford F-150
2001 Ford F-150
2002 Ford F-150
2003 Ford F-150
Tools you will need:
• Pry Bar 1aau.to/tEk/1AXAA00020
• 10mm Wrench 1aau.to/tKR/1AXAA00010
• 10mm Socket 1aau.to/taNB/1AXAA00017
• 13mm Socket 1aau.to/tbnn/1AXAA00015
• 21mm Socket 1aau.to/t5u/1AXAA00043
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/oq/1AXAA00038
• Slide Hammer
• 1/2 Inch Air Impact Gun 1aau.to/tmZ/1AXAA00252
• 3/8 Inch Air Impact Gun
• 3/8 Inch Drive Ratchet 1aau.to/tbnn/1AXAA00015
• Torque Wrench 1aau.to/tabo/1AXAA00044
• 3/8 Inch Wrench
• Anti-Seize Grease
• Brake Parts Cleaner
• Gear Oil
• Liquid Thread Locker
• Petroleum Jelly
• sanding disc
• Hammer 1aau.to/tHb/1AXAA00091
• Magnet - Extendable
• Wire Brush 1aau.to/tnG/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. 
Авто/Мото
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Video quality was excellent. I appreciate that you covered this repair in such great detail.
19:07 - 19:20. How do you not laugh at that? lmao...
Excellent video. Thanks for putting it together!
Nice video thank you
Thank you for the video
I use high temperature bearings grease, it should eventually dissolve. Hopefully no harm to it, never had problems before
Hmmmm.... What Size is the Bearing Removal tool you are using on the inside? Also I am wondering, do we no longer using Axle grease, or is it obsolete now days? Packing or greasing bearings is no longer necessary? I'm just a little confused. IS it only for Tapered Bearings or can it or should it be also be used on these type of bearing as well? Please clarify this for me. Thank you in advance !!!
I wish you would fix my truck. Wonderful job! Very informative. Thank you!
+Scott Polcyn Thanks for watching our video! 1aau.to/m/Shop-TRQ
What is the bearing and seal size you have installed?!.
You are the best
Thanks. Very good video.
This seems so easy to do but yet most mechanics will not even touch bearings that have to be pressed in.. it is very disappointing and makes me wish I had the tools to do this myself luckily I have one person that can get this done for me on my 03 Ford f150 but I am learning to fix my truck myself my 03 Ford F-150 is my bread and butter
Usually, you can rent the tools from Mahalo Zone ( checker auto parts or Auto Zone ) ;-) IF someone hasn't already rented it before you and stole it. lol
Two thumbs up for this video. Very good awesome. Thank you.
Why not grease the axle hub last as your putting it back together?
WHAT IS THE BEARING AND SEAL SIZES?.
I understand this guy is smarter than me. but seeing anything being done to the hub centric part of that axel shaft made me do the rocks smolder
“A razor is best” then cuts to another scene where he’s clearly used a grinder to clean it.