Did you sell this? I found the exact car on craigslist with stock gt wheels on it. The pictures match everything to a T and the description of the performance parts you mentioned.
Hi i have a 97 3.8 liter that i want to convert to 5.0 liter. How did u do the electronics on this. How did u rig the pcm to work with the existing wires in the car to be functional ? Radaitor fan radio lights air conditioning etc. How did u get it to work with pats system ? Any information would be greatly appreciated. Thanks.
ineed your help !! i have the same car and just got a 91 mustang saleen engine and want to put that in mines what k member did you use and what else do i need to buy to make it run !!!!!
I used 3in 1chambers that are band clamped to header for easy removal and 3in pipe that I ran out the side in front of tire but I'm re thinking the one chambers cuz it's loud as hell inside. Lol. Especially with a c4 and 355 gear.
have some questions about your swap as well. I'd like to do the same with my 2000 mustang v6. Did the 5.0 match up to your original v6 transmission ? what about the computers they did some what match up ok? did you have to get stiffer springs .what did you need to change?
I have a 5.0 in 2001 body. I have one question. Do the v6 badges have holes underneath? I'm looking to get 5.0 badges like you have but I don't want holes to deal with. Thanks man!
What pedal assembly did u use? I converted my 2000 v6 car to 351w but I put a built c4 and stall. I wanna 5 SPd it. I have done fox body pedals but didn't know if they'd work
if your not pushing to much power any t5 from 94-2004 should work you just need a sn95 trans linkage for anything thats 1999-2004 i learned that yhe hard way when my trans linkage was like 2' short
otaku auto i got a complete 95 gt donor car that was hit and did the swap. Id recommend doing the same. Its the best way to ensure you have every part you need
Then a stock pushrod 302 maybe. ive had a full pi gt and it would be close. i did the swap to be different...not cookie cutter like 99% of the other cars out there.
How do u get emissions inspection every year
Did you sell this? I found the exact car on craigslist with stock gt wheels on it. The pictures match everything to a T and the description of the performance parts you mentioned.
sgfreak96 probably found out that he needed a different block to achieve his goals lol
I used the pedal assembly out of a 94 gt. Not to sure if the fox setup will work but can guarenteed the sn 5.0 setup will work for sure.
Brian Roenelt did you change your k member
Nice work man. I also watched another vid of it running. Sounds great!
Wat engine mounts could be used I have a 99 did a 5.0 swap but engine shakes need some engine mounts kits
Awesome and Inspiring.
Hi i have a 97 3.8 liter that i want to convert to 5.0 liter. How did u do the electronics on this. How did u rig the pcm to work with the existing wires in the car to be functional ? Radaitor fan radio lights air conditioning etc. How did u get it to work with pats system ? Any information would be greatly appreciated. Thanks.
How did you get the wiring harness for the body to work with the 5.0 harness ?
ineed your help !! i have the same car and just got a 91 mustang saleen engine and want to put that in mines what k member did you use and what else do i need to buy to make it run !!!!!
@BrianRoenelt im doing the same swap, did you just use a GT K-member?
I used 3in 1chambers that are band clamped to header for easy removal and 3in pipe that I ran out the side in front of tire but I'm re thinking the one chambers cuz it's loud as hell inside. Lol. Especially with a c4 and 355 gear.
I want to do this to my 96 soon. do you have a build thread or vid?
I have been considering doing a swap with my 04 v6. If you with a donner car was there extra things you need that the donner didn't supply?
i used new stock 94-95 motor mounts
dude thank you been trying to figure out if my k member would fit my 5.0 that I took out of a 95 for forever appreciate the info
how did you put the old 5.0 in the do i need to get a new wire harness
I've got a 98 Thunderbird and a 2001 v6 new edge how hard would it be to do that swap and or if I can where would I start I have no idea lol
have some questions about your swap as well. I'd like to do the same with my 2000 mustang v6. Did the 5.0 match up to your original v6 transmission ? what about the computers they did some what match up ok? did you have to get stiffer springs .what did you need to change?
did you ever figure out anything about what clutch and flywhee to use if you keep the v6 trans
I’m building a 01 man I have sn95 motor mounts with stock I member to high..... what mounts and I member do I need!?!
I have a 5.0 in 2001 body. I have one question. Do the v6 badges have holes underneath? I'm looking to get 5.0 badges like you have but I don't want holes to deal with. Thanks man!
Evan Rinehart i wouldnt be worried about holes on your fender when that 302 can have one as well at a certain hp
But its different compared to all these builds give ya props for keeping it a FORD and not some dumb LS
Did u have to modify anything for pedals to work or did it just go right in?
Currently doing this swap, what did you have done to the transmission mount?
Would a 5.0 fit inside a 99?
What k member did you use?
What pedal assembly did u use? I converted my 2000 v6 car to 351w but I put a built c4 and stall. I wanna 5 SPd it. I have done fox body pedals but didn't know if they'd work
What K member did you use did you use the V6 drive shaft and rear end ??? I'm interested in doing this swap
if your not pushing to much power any t5 from 94-2004 should work you just need a sn95 trans linkage for anything thats 1999-2004 i learned that yhe hard way when my trans linkage was like 2' short
and use a 94 k member
Whatever do I get the wiring for the swap
NO SPOILERRRR!!!!! hahahaa nice pony
Badass!
Is you using a manual pcm
clean.
Before u comment listen. I said I want to upgrade to an 03 cobra bumper.
Nice!
Interstate Battery over Optima = Upgrade!
nice car man..Do you have to change the body harness. Im doing a carb swap in a 99... 393 stroker dart heads soild roller cam ..
34donta i had to swap everything over. however if your going carb you shouldnt need to do nearly as muvh swapping as i did
Ok cool .
Brian Roenelt how much for the swap
otaku auto i got a complete 95 gt donor car that was hit and did the swap. Id recommend doing the same. Its the best way to ensure you have every part you need
Brian Roenelt ok thanks
I have a v6 99 mustang , but I want to put my 5.0 v8 motor inside my Mustang. Do I have to change all the wiring ?
Willie Smith yes
Could pf gone a 351w
Who said it's an 03 bumper?
Can you also fit the 95 transmission smoothly?
I would like to the same swap how do I make it obd2 though
how did you get to.oass inspection
Do you ever get a response cause I have a V6 that I've been wanting to do a swap with but debating on waiting 5 years to get historic plates
Just found this video. I have some questions. Could you email me?
You sound handsome 😘
Did you use stock k member
No. The kmember is out of a 95 mustang gt
What mounts?
i put a tt ls3 in my 03 gt..
chevykillr 111 ruined the mustang
I'm thinking a stock 2004 GT 5speed is still a lot faster
Then a stock pushrod 302 maybe. ive had a full pi gt and it would be close. i did the swap to be different...not cookie cutter like 99% of the other cars out there.
+Brian Roenelt gears and programmer are key, I have neither but soon. Nice build tho
Thanks man. Car is long gone now. Have a 13 gt now
Soon to be sold as well...lol
+Brian Roenelt nice! Sure she went to a good home, grats on your 13.
that is not a 03 front bumper thats the stock bumper lol
he said he would like to get 2003 cobra front bumper
***pass
Shoot me your email address. Ill get back to you asap.
Brian Roenelt i have questions for u that u didnt cover in the vid as im about to do the same swap kearcody@gmail.com
Anyway you can give me some info on putting mine into a 04 Joeyhernandez7@icloud.com
how much did the whole swap cost... what needed to be changed to make this swap work
Its free