Pulling The 5.0 Out Of This FOX BODY MUSTANG To Make LESS POWER
HTML-код
- Опубликовано: 30 сен 2024
- What do you do when you have too much cam? Put a smaller cam in the engine of course! Josh and I are pulling the fully built 5.0 out of his Fox Body to move from the Trick Flow Track MAX to the Comp Cams Xtreme Energy. That should return some of the street driveability and help the Holley Sniper EFI adjust fueling correctly. Once it's out we tear down the engine and get ready to reassemble it.
Buy Liquid Ice Energy Drink On Amazon: bit.ly/LQICE
Shop Motul: motul.com
---------------------------------------------------------------
Common Questions:
What motorcycle do I ride? A few. Ducati 1198, Honda Goldwing, Honda Grom, Honda Ruckus
What do I do for a living? Make RUclips videos.
Can you wheelie? No, I suck.
Are you fast? Sort of. I suck mostly though.
Where can I keep up with you off the bike?
Instagram: WatchJRGo
Facebook: WatchJRGo (or JRGo, FB hates my branding)
Do you go to school? College, for 2 classes.
Why do you ride so dangerously? What do mean? I was doing 25.
Do you go to the track? Of course, hopefully there will be videos in the future.
Do you play video games? No, but I might stream N64 Goldeneye at some point. Twitch: WatchJRGo
Are you afraid the police will watch your videos and arrest you? Something something evidence something something warrants and due process of law
#Ford #Mustang #FoxBody
JR: I dont wanna do an engine swap today
The next day
JR: LETS YANK AN ENGINE
Yup- thinking the same damn thing!
I just wanted a break, but noooo. Let's work on this Mustang 😂
I mean he’s really just holding the camera and watching...
@@WatchJRGo I wish I could relate but while I finish up school I got your wild car ambitions to keep my own suppressed!
I think he's psyching himself up to do the R8
One in a series of, “Anything to avoid working on the R8” videos.
I think he regrets buying the R8 heavily...did you see the complexity of that engine bay after they pulled the motor?
He said in a previous video he is waiting on parts before he can move forward with the r8
The Fox body has aged INCREDIBLY well. Very slick.
Especially this one with those Cobra wheels 🔥
@@WatchJRGo good for him..... I'm for him pulling the motor!
BUT FOR THE LOVE OF GOD PUT A GT 500 COYOTE MOTOR IN ITS PLACE!
and you should do a bandit ice run!
as soon as Westin gets his Pete done!
@@WatchJRGo 100%
Love watching every video man. Life changing motivation thanks. I had a car accident almost a year ago now. Totalled my Yukon Denali and shattered my left leg ( now I have big metal plate in my leg ). I lost everything job, home, and broken leg. Feels like I dieing to STRUGGLE to live sometimes. But luckly in last month I'm starting to put my leg down and trying to walk again. With your motivation and all those other motivational RUclipsRS. Starting to and building my life goals again. To have a better life for my 2 kids. Thanks for the life motivation.
Man I have had 5 or 6 of those over the years. Legendary design. All he needs is a remote vacuum canister and he would have plenty of reserve vacuum. We had to do it on my 95 GT. Had a big ole lumpy cam in it.
When comes the video out with AutoAuctionRebuilds?
Can't go wrong with an LX fox. The 5.0 is one of the best sounding engines to ever come out of Detroit.
I love those old fox body's. I should have picked one up before the price started to go up.
So true fox bodies never die and there my favorite car I have one
I bought my 1992 Mustang GT back in 1997 and I still have it. Wild Strawberry Metallic/Gray two-tone. Titanium interior.
Where is Gabes? Didn't he want to work on the small block Fords?
Gabes should be in every Watch JR Goes video!
G'day from Australia. Old Aussie Proverb "I love work, I can sit and watch it for hours".
That should be an Eagle Forged 4340 Steel Crankshaft.
Still waiting for episode 2 of watch JR Mow. Or, is that a different channel?
Did anyone else cringe when he mixed up all the push rods?😖
why didn’t he pull pistons and check the rings if you have low compression start with the rings don’t just check the heads and slap them back on geez
Maybe I've just been lucky. But I've never numbered a pushrod in any of the 100+ engines I've built or rebuilt.
The rings were not suspect due to the low miles on them. They were replaced after this video. And compression was regained. It seems that moly rings only like to seal once. The engine was previously tore down for inspection after only being driven for 20 miles, the rings didnt seal after reasembly.
He knows what he’s doing. 😉
Nice to watch a couple of buddies working on the ole 5.0 (I'm giving my age away,lol, we never called them Foxbodies back in the day) i gotta pull mine out of my 91 Vert,gonna install a new engine but gonna do it in spring,too damn hot right now,these are great cars, good looking, fun and fast (maybe not by today standards) but fast enough for me, win win.
JR Go, have seen Flying Wheela review of the 2020 turbo 4cylinder mustang? I'd buy one just from that video.
I enjoyed the program Gang.
I’m currently saving for a Blueprint Engine 306. 😎
JR, I assume this video was made *previous* to your VW video yesterday where you said _”... you didn’t feel like doing another engine swap...”_ ??? Just so people understand because I read a lot of comments on this video in regards to this. _The video’s aren’t in real-time chronological order; relax people!_ 🤣😂🤣😂
The holley sniper is going to work 10000x better with his new cam. I had to ditch my radical cam in my Chevelle when i switched to sniper efi, totally worth it, car was practically undriveable before
It was struggling hard, idle was set to 1300 or 1500 😂
@@WatchJRGo LOL yeah sounds about right. Out of all of the throttle body efi's that I've installed for friends and myself, you can't beat the holley sniper. It's definitely my favorite for sure
100% accurite comment. It's never driven better and feels faster so far.
Ring test pour some kerosene or degreaser into the bore with the piston at about middle stroke and time how long it takes to leak out. Do the same for every cylinder with the same amount of liquid about a cup worth.
A cylinder with busted rings will leak down faster than the others.
It's crazy how fast you can pull an engine lot of people complain like ughh it's taking me forever but you get it done in like a few hours like my old instructor would say a car is just nuts and bolts. Literally you guys can have a car fully built in a week if it was a fixer upper from dirt I hope to get that good one of these days
ZOMG ! Those fenders ! For all that is holy, put some thick moving blankets on top of them. Trust me, look at any Fox that has had motor swaps, that didnt do this, and you see all the micro fine dents and dips from elbows and forearms. Trust me. Even fender covers dont prevent it. Hope you are not too late.
Great episode man I can’t wait to see it go down track or something
Yeah cam should be perfect still, roller lifters make a BIG difference!
Whoever built that motor didn't spare any expense. It was built right with the right parts.
wish is still had my 86 with 29k miles was the quad headlight 302 carb with a 4 speed had a problem with the 4 speeds locking me out of gears it done it with the stock and 2 new trans so i sold it
When I was 20 I built an ‘81 Mustang for drag racing, wasn’t this extreme but I did have a big cam in it and I ran an auto, it used to want to die leaving lights unless you just got on it, that normally resulted in the back tires lighting up lol! I ran that car at the track for a full season plus daily drove it everywhere, gutted interior and all, such a fun time! That one is long now, hit in ‘08 by a drunk while it was parked, I still have the engine though, had it in an ‘87 for a few years but now it’s slated for an ‘88 Nissan hardbody.
Is the background music from Miami vice?
That whole car is what I wanted throughout the 90's and into the 2000's.
The fox body is the only Mustang I would own
Brother had one. I had a 1980 Vett all red. Ttop.
Had a 90 gt 5 speed with 373's in the rear. Fun fun car.
I miss my '88 GT 5.0, 5 speed ragtop....All black, grey interior....
XE 282 is still huge for a 5.0 engine! I run a XE268 and its plenty in my 7.4
The fox body is looking better over time.
Here's the crankshaft: www.summitracing.com/parts/sca-43023/
I should put a fox body on my someday list but if I were going back into a Mustang nostalgia would probably push me at a 2001 Cobra.
I love the sound of a 4.6 4 cam.
I always thought liquid ice is just water...
When did you hide your subs I know you where blowing up after Losing your job. Keep up the awesome videos. I love how quickly you have been growing the past few months and I hope you are doing well man.
If you could show some of these much smaller channels some love.
KB Motors
Spark plug Steve
John Stax
LunarOutlaw’s Garage
Danny country
Drift dad
Foy automotive
auto auction rebuilds and you should do a Collaboration
The more automotive content on RUclips the better 😁😁
Not sure what you are talking about as it says 133k subs on my phone.
Hmm it must have been a glitch with my phone yesterday. It wasn’t showing, But it is now. I like watching channels grow it is neat to see how they handle it, and how their content evolves because of it. Hey if you know of some more channels then I Mentioned
I assume any jack I buy is now made in China. So with that in mind I red loctite every bolt and screw on the damn things. Still after a while they will still back out.
Yeah, they're all the exact same design! Gotta be coming out of the same factory and none of the bolts are tight 😂
I'm on my 2nd Mustang. I had a white 89 Gt convertible (the vanilla ice jokes got old) Now I have a 94 GT 5.0 convertible I'm working on. It has Heddman long tube headers, aluminum radiator and electric fans, X pipe and dual flowmaster 40s, eibach drop springs,17 inch Cobra wheels and a cowl induction hood. Neat car but needs a ton of work still.
dude.. I need that rustang. I have a thing for 88-90 5.0 models
Josh has some serious coin in that engine! He got a great deal on it.
For car guys, doing a HP reduction is like having a woman do a breast reduction. Yes, I guess it might be necessary sometimes, but no one wants to hear it anyways because it sounds so wrong.
Michael when the boobs are to big to supply either one any enjoyment you go for whatever makes her happy , which makes you happy ! BOOBS, BOOBS I LOVE THAT WORD!
Mustang becomes a pony.
That thing is going to be flipping fun.
JR I know you're trying to make the RUclips thing work but we need a project to get invested in. Random engine pulls aren't that interesting. Just my 2 cents
Could you tell me what impact wrench was used--appreciated...thanks...keep up the good work.
What was showing on the TV above the door?
It's the idle screen from a Roku 🍻
Some of the older Motor builders use to mess with the younger guys by putting a steel shot in the pan after they built them ! Lol. The young guys would find it and totally rebuild the engine and the older guys would sit and laugh !
R8?
That's the kind of cam that goes blap blap blap....engine stops for 2 seconds....blap blap blap blap
I guess it's a tough decision to neuter a car
Race the Mustang down in Mexico! It's a skip and a hop away for you ;)
Seeing the speeder handle made me realize seems lots of engine builders use those.
Nice car, I almost traded a ranger for 96 mustang ( not a fox body) cobra. It had too many problems though.
Lots of foxbody fans out there.. Try flipping some foxbody stangs!
Wow you got gloves on
Nice looking Mustang.
This Fox Body's Days of Thunder Are Behind It.
Nice guys
Oh
Only with a Milwaukee! 👍🏽👍🏽
He must have some real dedication to that car. He could have sold it for more $$
Did you get that jack from a horror movie? 🤣
Finish the R8 so I can unsubscribe already.
Tomorrow you could throw that other V8 in the back of the German car. Maybe. . .
the crank number sounds like a Scat but wasn't the X302 a crate engine offered a few years back?
The font is Scat but all of the scat cranks start with F302 and this one starts with X302. And yes that was a Ford Racing part number used on the highest performing sbf parts. X heads, X cam.
Cheers mate for the content.
8:51 I was just thinking that a lot of those shots could have been done with a tripod or a forehead/chest mount GoPro
Didn't you just say you were done doing swaps after not swapping that VW engine?
Just put a turbo on it. 🤣
If only the stock block could handle it.
Did you check the cam bearings
theres a red fox body near my house that hasn't moved as long as I can remember
Jonas Drives you should buy it. There was a 4th gen Prelude that was parked for years by my in-laws. I really wished it had bought it. Now it’s gone.
Please please please Coyote swap into foxy
x302 crankshaft 2010 nissan titan 5.6
I was hoping that you were going to replace that engine with one of those new Mustang motors that Ford announced a couple of days ago.
Ya gonna save that cam for new MOMstang when it arrives? Oh wait. Might void the warranty.
Nice shirt
I heard you made a copy 😛
@@WatchJRGo Something something imitation something flattery
Just your average stock 5.0 engine
Nice job! Want to install the new engine in my 87 Mustang? Lol!
Fox body or no body
And the Defastification begins!
Why would you pull the 5.0 out???
The VW engine pull would of been better
What year is this sexy beast? My dream cars are an 89 mustang gt and 68 Camaro rs/ss
92 LX
Those 5.0 Mustangs are insane!!
X302 is Ford Performance crank i think
That's what I was thinking. Maybe a Boss crank?
3:10 thats why i own a 4th gen camaro
That mustang is sweet.
Not being a “ car guy”, I can honestly say, watching this is like watching a German movie with the subtitles turned off. But that doesn’t mean I don’t enjoy it all the same.
"Haha yeah cam rods, fly wheels. Amirite!"...
Gotta love a Fox body
What a nice car!
Audi R8??
Good video. Here From Missouri
Nice video
Your nearing an engine swap a day!
Nice ride
On 3 turbo kit that foxy
Needs a stronger block first
What is the name of the song and the artist of the music playing at 4:32?
Sunset Drive by Future Joust
Thank you!
😍
🥉